A question on the operation of the device

[Александр (разработчик)]

it turned out, the monitoring is also disabled eye movement "left-right", diagonally, on the square, the triangle, broken line, etc., the main thing that the eye movement was intermittent. So here's the question: is the duplex mode needs to work like this?

Yes, that should work. The direction of movement of the eyes actually doesn't matter. The main thing is the pacing: the movement of short - pause-short movement - pause and repeat several times. The good old up and down is advised in the instructions only to have been a certainty, otherwise there will be a sea of thoughts about how better vertically, horizontally, diagonally, snake... .

[Кейн]

it turned out, the monitoring is also disabled eye movement "left-right", diagonally, on the square, the triangle, broken line, etc., the main thing that the eye movement was intermittent. So here's the question: is the duplex mode needs to work like this?

Yes, that should work. The direction of movement of the eyes actually doesn't matter. The main thing is the pacing: the movement of short - pause-short movement - pause and repeat several times. The good old up and down is advised in the instructions only to have been a certainty, otherwise there will be a sea of thoughts about how better vertically, horizontally, diagonally, snake... .

But isn't it possible to accidentally disable the monitor, not realizing himself in his sleep? In fact, as far as I know, the eyes in the REM phase move gotichno and with pauses(depending on sleep).

[Александр (разработчик)]

But isn't it possible to accidentally disable the monitor, not realizing himself in his sleep? In fact, as far as I know, the eyes in the REM phase move gotichno and with pauses(depending on sleep).

And that's why the manual says that you should start with normal mode. But to go to the duplex mode, only after the experience and a stable result in the normal mode. Then it leaves nothing to chance.

[Кейн]

But isn't it possible to accidentally disable the monitor, not realizing himself in his sleep? In fact, as far as I know, the eyes in the REM phase move gotichno and with pauses(depending on sleep).

And that's why the manual says that you should start with normal mode. But to go to the duplex mode, only after the experience and a stable result in the normal mode. Then it leaves nothing to chance.

That is when you learn to recognize the signals from the normal mode to the duplex there is less likelihood of accidental disconnection, as will be able to quickly recognize the signal from the device, I correctly understood?

[Александр (разработчик)]

That is, when you learn to recognize the signals from the normal mode to the duplex there is less likelihood of accidental disconnection, as will be able to quickly recognize the signal from the device, I correctly understood?

Exactly.

[Кейн]

That is, when you learn to recognize the signals from the normal mode to the duplex there is less likelihood of accidental disconnection, as will be able to quickly recognize the signal from the device, I correctly understood?

Exactly.

Thanks for the clarification.

[АндрейК-н]

As to do so would be in the normal not Pro version of DREAMSTALKER could constantly hear beeps and see flashes?Although mine I have assumptions that you need to use the Wake-up inputs CHUP.But maybe there is some other way.Answer me this question.

[Александр (разработчик)]

mine Although I have assumptions that you need to use the Wake-up inputs CHUP.

In this mode, the device will constantly give tips installed - sound and light (if included).

[юсф]

Alexander, please tell me. I have a regular Dream-stalker. Can't figure out how to delay the enable signal after the occurrence of FBDG. The fact that they are triggered too early, for example, just in front of me begins to unfold Kartika sleep as I'm woken up flash. If you could for five minutes or ten to move the signals, I would have time to enter the dream.
How to solve this problem?

[Александр (разработчик)]

Alexander, please tell me. I have a regular Dream-stalker. Can't figure out how to delay the enable signal after the occurrence of FBDG. The fact that they are triggered too early, for example, just in front of me begins to unfold Kartika sleep as I'm woken up flash. If you could for five minutes or ten to move the signals, I would have time to enter the dream.
How to solve this problem?

Decrease the brightness of the flashes. Then they will enter the sleep as an event of the current dream, but will not awaken You. You need to learn to recognize these events not as a part of the dream, namely, as the tip of the device. Shift same tips time most likely nothing will, because the bright tip will still Wake You up. If brightness want to reduce simply, quickly and without reading the instructions - have a wonderful home method: seal glowing red LEDs, one or more slices of the white insulation tape or duct tape to achieve the desired brightness. Here is the solution to You problem .

[юсф]

Alexander, thank you. Yes, brightness is all clear.
And yet to shift time is not possible, am I right?

[Александр (разработчик)]

And yet to shift time is not possible, am I right?

Right. Such an opportunity in the normal version of the device is not provided. By the way, after the occurrence of a distinct phase of the REM, the eye movement analysis takes 30 to 40 seconds before tripping the device. This is a normal time.

In PRO version you can set the delay of any size if put in the directory BEFORE the blank file MP3 need duration. The PRO version is more versatile in all respects, it is possible to experiment, if there is a desire. Recommend.

[юсф]

Thanks, will wait for the pro version-2 with the wishes of the practitioners From myself I will add that it would be convenient to set the settings without removing the motherboard from the mask, for example, if in the tissue there was a window of transparent material in front of the display.

[1Андрей1]

Hello. Got my dreamer, understand. Have questions, suggestions.
1. The manuals D-Pro V1.05 written do not use batteries. Why? There are good Sanyo eneloop wanted to use them. Categorically impossible or is it possible?
2. Don't know if. But I think it would be nice to be able, after the seizure of the batteries, keep watch, etc. say a little watch battery would solve the problem. (probably not special. do not kick)
3. Mask rag, sooner or later will need a new one. Where can I get and for what? It is possible to stitch, but I for industrial production.

4. What is the optimal playback time of the file should be in the directory AFTER? There are the opinions of specialists about this? 1 min 5-15-60 minutes? I understand that it is my business, but I would like for science )

5. It is impossible to give the task to make a more detailed instructions, as well as to compile a complete training manual how to compile scripts which setup to give the After and Before, etc.
I think it will be interesting and useful to everyone, not just beginners. Need a more detailed FAQ )

Yet all )

[Александр (разработчик)]

Hello. Got my dreamer, understand. Have questions, suggestions.
1. The manuals D-Pro V1.05 written do not use batteries. Why? There are good Sanyo eneloop wanted to use them. Categorically impossible or is it possible?

The battery voltage is less than battery. You can put in the device vegetarienne batteries, but the duration of the operation from them will be less than You expected or the device directly will not pass the test batteries. Harm from it any will not be.

[Андрей Кабанков]

3. Mask rag, sooner or later will need a new one. Where can I get and for what? It is possible to stitch, but I for industrial production.

If necessary, you can buy from us at a price of 600 p.

[1Андрей1]

Alexander (developer) Thank you. Then try to insert the batteries. I think 7 hours of sleep should be enough if the device will accept them )

Andrey Kabanov Shoto, as it's expensive )
In General, sleep mask one time. The idea came from the top to stick in the zipper, so the fee wasn't moving at all. You don't have such ideas?

Not to insult you, but you need to seek help for Chinese or Taiwanese friends. To make the device smaller and more modern. But I have a feeling that the device "La-Union" the time of the first cooperatives. Maybe he's more reliable and technically perfect, but the appearance and dimensions, I don't like.
The same display, outdated .... years ago.
There is room for improvement.

[1Андрей1]

In addition to the wishes. Need a case. Don't know how, but today I woke up and the device is at the waist. Maybe I lie, maybe not. But crush will be hurt.

[1Андрей1]

Tried to record her voice. In the end, on up to 3 devices (smartphone and 2 laptops with built-in microphones with separate microphone), But the result is the same, while playing on grimstalker heard a big noise. Used additional Audacity 1.3 Beta (Unicode), but didn't like the way he trims the empty spaces and distorts the sound. And the noise is still there.
MP3 recording plays back normally, then speaker of grimstalker normal.
Tell me how to make a quality recording, without the extra spending.

[Александр (разработчик)]

Use Sony Sound Forge or something similar (look in the network other programs, if this does not suit). Make a normal MP3, and it's clear, loud and without noise .

[к-13]

1Андрей1, now any digital camera writes a sound - quality there is much better than a cell phone or a box with a fan inside, and the noise of the presses and the sensitivity level is decent(I have a lot of devices through digital and cassette recorders, a dozen mp3 players, the boom 3 meters from the netbook... - digital Korean soap competitors on the record there is no sound). Better to record the voice closer, so the level was at the maximum, and then just lower the volume in 3-4 times - then the noise does not remain...

[1Андрей1]

Alexander (developer) Sony Sound Forge didn't help. Even software insert silence 2секунды, before my entry and after, and the "noise". To see the matter in the instrument still. On your computer, your device and when listening to headphones all more or less (meaning recording). In the device, when played "loud" much. Had to programmatically increase the volume of the records and reduce the volume of the device. If it's not just me, I mean, what else to upgrade.
With shumopodavleniya and cutting out cod etc forget also play. But I'm not a Pro sound engineer, so the reference to configure everything.
Batteries Sanyo eneloop the device took. Day worked, and I think the second will live. That's enough.


K-13 I have no Korean dish soap ( and all camera and camcorder) But I will keep in mind. Thank you.

[Александр (разработчик)]

Alexander (developer) Sony Sound Forge didn't help. Even software insert silence 2секунды, before my entry and after, and the "noise". To see the matter in the instrument still. On your computer, your device and when listening to headphones all more or less (meaning recording). In the device, when played "loud" much. Had to programmatically increase the volume of the records and reduce the volume of the device. If it's not just me, I mean, what else to upgrade.
With shumopodavleniya and cutting out cod etc forget also play. But I'm not a Pro sound engineer, so the reference to configure everything.
Batteries Sanyo eneloop the device took. Day worked, and I think the second will live. That's enough.


K-13 I have no Korean dish soap ( and all camera and camcorder) But I will keep in mind. Thank you.

The battery is not the normal voltage for the operation of the device. CHECK THE BATTERIES OF ALKALINE SYSTEM. Listen to the standard messages, which are by default on the memory card. If there is no noise, just make conclusions and follow the instructions.

[1Андрей1]

Alexander (developer) I experimented with BATTERIES of ALKALINE SYSTEM, which was in the kit. But since I wanted to write that radiate "noise" and therefore I changed the batteries. To test Your assumption that the system will not start. And unsubscribe at the same time so the question.
Listened to the standard message in wav. "Kicking" too. That LE-2 to LE-9. Threw army songs MP3, one normal, the other slightly radiate, but not as a standard wav. Bitrate they both have 128 KB/s.
You can throw the record made by HTC (326 KB, MP3, amplifier disabled). Not the standard, but the General idea can be obtained.
So nothing I'm obsessed with recording, the problem is not me, and dreamstalker campaign.
Thanks for the tip to check out a standard message, didn't think of it. Listened to them on the computer only.

[Александр (разработчик)]

1Андрей1
If the background is more than the norm, and the device has no mechanical damage, just change it in the office.