Questions on Ultra DreamStalker

Instrumentsthat will help you to get into a lucid dream
мама Вовки
Posts:23
Joined:Sat Sep 22, 2018 16:36
Re: Questions on Ultra DreamStalker

Post by мама Вовки » Wed Sep 26, 2018 0:26

Андрей Кабанков wrote:manual .
http://www.mindmachine.ru/download/Drea ... uktsia.pdf

On your laptop or smartphone you choose in the list of Wi-Fi network DreamStalker. Connect to this network using the password "12345678".

Open the browser through which you access the Internet (browse pages) , instead of the title page indicate "192.168.4.1" (this is the same address, only letters and numbers) and enter the management page of the device.

This is the first time, then your smartphone or laptop will find the network and connect to the network DreamStalker password to enter and will not need in a browser can bookmark with an address of 192.168.4.1 and you'll get a page control with a single click.
Thank you! All sconnection ), looked at the statistics, for the period from 3 to 7 a.m. no tripping no. I wonder who of us is to blame, me or the device?
The impression from the first entry, that the volume of my head is not commensurate with the mask, it stands unsteadily and , most likely, night, moves out to the side. Today we'll try again.

Александр (разработчик)
Posts:813
Joined:Sun Dec 16, 2007 12:24
Location:Москва
Has thanked: 6 times
Been thanked: 18 times

Re: Questions on Ultra DreamStalker

Post by Александр (разработчик) » Wed Sep 26, 2018 0:32

mom VovaYou on the stomach sleeping?

мама Вовки
Posts:23
Joined:Sat Sep 22, 2018 16:36

Re: Questions on Ultra DreamStalker

Post by мама Вовки » Wed Sep 26, 2018 10:21

Александр (разработчик) wrote:mother VovaYou on the stomach sleeping?
And if not on the stomach, then tripping will be? Then why weren't they? I just want to know what will happen from small movements of the mask to the side during sleep. I only once while wearing the mask, it's just the period of my acquaintance with her.

Александр (разработчик)
Posts:813
Joined:Sun Dec 16, 2007 12:24
Location:Москва
Has thanked: 6 times
Been thanked: 18 times

Re: Questions on Ultra DreamStalker

Post by Александр (разработчик) » Wed Sep 26, 2018 10:55

mom Vova, with a significant shift mask sensor eye movements can either occur very rarely or not at all triggered. Sometimes the offset of the mask can even cause shifting of the device within the mask, and then the edges of the cut (tissue masks) are beginning to close the sensor eye movements that affect his work, of course. Some users just cut fabric edges around the sensor, but do not overdo this - too much neck there to be undesirable. Turn on the device test mode sensor and check that in any of the locations in which You sleep was not one of the two possible signal errors.

Before putting on the mask (before bed) don't forget to enable sleep timer.

User avatar
Андрей Кабанков
Автор сайта
Posts:3875
Joined:Fri Mar 31, 2006 8:19
Location:Москва
Has thanked: 1 time
Been thanked: 182 times
Contact:

Re: Questions on Ultra DreamStalker

Post by Андрей Кабанков » Wed Sep 26, 2018 11:10

mom Vovathere's also the option "check sensor eye movement", which allows you to wear a mask and to customize it for themselves.
Use this and see how it works, when the mask you're wearing.

мама Вовки
Posts:23
Joined:Sat Sep 22, 2018 16:36

Re: Questions on Ultra DreamStalker

Post by мама Вовки » Thu Sep 27, 2018 10:27

Александр (разработчик) wrote:mother Vova, with a significant shift mask sensor eye movements can either occur very rarely or not at all triggered. Sometimes the offset of the mask can even cause shifting of the device within the mask, and then the edges of the cut (tissue masks) are beginning to close the sensor eye movements that affect his work, of course. Some users just cut fabric edges around the sensor, but do not overdo this - too much neck there to be undesirable. Turn on the device test mode sensor and check that in any of the locations in which You sleep was not one of the two possible signal errors.

Before putting on the mask (before bed) don't forget to enable sleep timer.
The second time I put on a mask - and again, no positives. Maybe I'm doing something wrong?
From off press the S button (sleep timer) to sound, lights up and flashes red light I wear a mask. All right?

Андрей Кабанков wrote:mother Vovathere's also the option "check sensor eye movement", which allows you to wear a mask and to customize it for themselves.
Use this and see how it works, when the mask you're wearing.
Please write the procedure for this test, I didn't find it in the manual.

Александр (разработчик)
Posts:813
Joined:Sun Dec 16, 2007 12:24
Location:Москва
Has thanked: 6 times
Been thanked: 18 times

Re: Questions on Ultra DreamStalker

Post by Александр (разработчик) » Thu Sep 27, 2018 10:57

мама Вовки wrote:Second time put the mask on and again, no positives. Maybe I'm doing something wrong?
From off press the S button (sleep timer) to sound, lights up and flashes red light I wear a mask. All right?
Yes, that's right.

User avatar
Андрей Кабанков
Автор сайта
Posts:3875
Joined:Fri Mar 31, 2006 8:19
Location:Москва
Has thanked: 1 time
Been thanked: 182 times
Contact:

Re: Questions on Ultra DreamStalker

Post by Андрей Кабанков » Thu Sep 27, 2018 11:04

мама Вовки wrote:sequence of actions
Click the button "check sensor eye movement"
To wear a mask.
Close your eyes, look up and down, left and right.
Make sure that everything is working, if not working , open your eyes, blink, to see whether the sensor. On the motion of a century, the instrument must meet the short beeping and not beeping if your eyes alone. Next, to understand whether actually wearing a mask, is the sensor in front of the eye or not. If everything is working, adjust sensor sensitivity if necessary.

Александр (разработчик)
Posts:813
Joined:Sun Dec 16, 2007 12:24
Location:Москва
Has thanked: 6 times
Been thanked: 18 times

Re: Questions on Ultra DreamStalker

Post by Александр (разработчик) » Thu Sep 27, 2018 12:29

мама Вовки wrote:please Write the procedure for this test, I didn't find it in the manual.
Sometimes it may be a situation in which the device is "Ultra DreamStalker" night works extremely rare or, on the contrary, is triggered excessively often. As the practice of solving such problems, they often arise due to variety of reasons, the vast majority of cases not directly connected with the correctness and performance of the device itself. Most often such cases are caused by incorrect settings of the instrument is not corrected to the right, and in the opposite direction. However, occasionally there are issues of a different kind. For example, sometimes the sensor movements of the eyes partially closed edge of the cloth masks, a cut in which the production was made a little less or made with the offset relative to the position sensor. This article was specially written in order to help you find the root of the problem and restore normal operation of the device.

To resolve the problem, you should first test the sensor eye movements. To do this, connect to the device via wifi and do a factory reset to set the sensor sensitivity and other settings as "default". Please wait until the device will boot and will give a melodious tone. Again connect to the device via Wi-Fi and turn on the test mode of the sensor movements of the eyes. The device at the same time he will disconnect your wireless connection and You should be carefully, without pressing the button, wear a mask device on the face. The device will make different sounds, which should not be ignored. The room should be bright light, especially from light bulbs. Slight backlight type of light or a weak bulb at a sufficient distance. You had better lie down on the bed in position on your back and close your eyes. Now listen to what sounds are emitted by the device. In the case of normal operation it should be a separate very short bleeps. If you hear them, try to slightly squeeze the mask with your hand to the right eye, and then try a little to move the mask from the eyes. In both cases, you should hear only a short bleeps, which correspond to the detected movements. Place the mask exactly and try to relax and calm closed eyes to eyelids twitching and trembling. If the device ceases to emit sounds, it is possible to make an unambiguous conclusion that the motion detector eye works absolutely fine.

Now consider the situation when test mode the sensor will signal an error. In contrast to earlier devices of the series "DreamStalker", the instrument version of the "Ultra" uses advanced algorithm for testing gauge, which measures the departure of the sensor signal in the test area. There are two different types of signal errors.

The first error signal is a constant triple signals "pee-pee" with a pause between them. Such a signal means that the sensor sees nothing in front of him, so his signal goes into the space, or the signal is not emitted at all, or not accepted reflected signal. In norm it can only be removed when the mask is placed on the surface of the table up sensor. If such a signal is heard when the mask is worn on the face, it can be assumed that the closed edge of the mask is dirty or one of the three holes of the sensor located on the side of the right eye. Perhaps mechanical was damaged one of the sensor elements. "Treatment" is simple – it is necessary to slightly undercut the edge of the fabric covering the sensor and clean with cotton swab moistened with alcohol, the "eyes" of the sensor. Mechanical damage requires the repair or replacement of the damaged element of the sensor.

The second error signal is a constant private long signals "PI and" with a pause between them. If You hear this beep, it means that the sensor takes too strong reflected signal. This can occur either when too tight a grip on the mask to the surface of the eye, or in the case when the holes of the sensor hangs any mask element, which is a reflection. This may be the edge of the soft gasket or otogrevshis the edge of the fabric of the mask overhanging the openings of the sensor movements of the eyes. Despite the fact that the mask is made of black fabric, the wonderful sensor signal is reflected from the surface of that tissue. To resolve this problem easily with the help of small scissors or a sharp knife.
What to do if the test is absolutely fine and the device works very rarely on eye movements night? All people are different, eyes are located at different distances from each other, eye movements during sleep are stronger or weaker, the skin of the eyelids may have a different degree of reflection due to excessive dryness or greasiness, etc. for such special occasions is for setting the sensitivity of the sensor eye movements, available through the web interface as all other instrument settings. The standard setting of the sensitivity of the sensor is "4" (not to be confused with quantity sensitivity). This level roughly corresponds to the sensitivity of the early instruments from the series "DreamStalker" (in which she couldn't be adjusted). To increase the sensitivity of this setting should reduce, not increase! Put – "3" in the morning and look at the statistics of positives. Should be monitored a significant increase. If it is still not enough, try the value 2. Also in the device there is a setting related to the sensitivity of the sensor only during the monitoring of the dreaming, called "quantitative sensitivity of the sensor eye movements". This setting shows the number of times should be detected by the eye movement over a certain period of time for actuation of the device. To increase the sensitivity to eye movements this setting should also decrease, not increase! The default value is 5, it can be reduced or, conversely, to increase (zoom only when necessary to reduce the sensitivity).<

мама Вовки
Posts:23
Joined:Sat Sep 22, 2018 16:36

Re: Questions on Ultra DreamStalker

Post by мама Вовки » Thu Sep 27, 2018 20:45

Александр (разработчик) wrote:
мама Вовки wrote:please Write the procedure for this test, I didn't find it in the manual.
Sometimes it may be a situation in which the device is "Ultra DreamStalker" night works extremely rare or, on the contrary, is triggered excessively often. As the practice of solving such problems, they often arise due to variety of reasons, the vast majority of cases not directly connected with the correctness and performance of the device itself.
most Often, these cases are caused by incorrect settings of the device is adjusted not in the right, and in the opposite direction. However, occasionally there are issues of a different kind. For example, sometimes the sensor movements of the eyes partially closed edge of the cloth masks, a cut in which the production was made a little less or made with the offset relative to the position sensor. This article was specially written in order to help you find the root of the problem and restore normal operation of the device.

To resolve the problem, you should first test the sensor eye movements. To do this, connect to the device via wifi and do a factory reset to set the sensor sensitivity and other settings as "default". Please wait until the device will boot and will give a melodious tone. Again connect to the device via Wi-Fi and turn on the test mode of the sensor movements of the eyes. The device at the same time he will disconnect your wireless connection and You should be carefully, without pressing the button, wear a mask device on the face. The device will make different sounds, which should not be ignored. The room should be bright light, especially from light bulbs. Slight backlight type of light or a weak bulb at a sufficient distance. You had better lie down on the bed in position on your back and close your eyes. Now listen to what sounds are emitted by the device. In the case of normal operation it should be a separate very short bleeps. If you hear them, try to slightly squeeze the mask with your hand to the right eye, and then try a little to move the mask from the eyes. In both cases, you should hear only a short bleeps, which correspond to the detected movements. Place the mask exactly and try to relax and calm closed eyes to eyelids twitching and trembling. If the device ceases to emit sounds, it is possible to make an unambiguous conclusion that the motion detector eye works absolutely fine.

Now consider the situation when test mode the sensor will signal an error. In contrast to earlier devices of the series "DreamStalker", the instrument version of the "Ultra" uses advanced algorithm for testing gauge, which measures the departure of the sensor signal in the test area. There are two different types of signal errors.

The first error signal is a constant triple signals "pee-pee" with a pause between them. Such a signal means that the sensor sees nothing in front of him, so his signal goes into the space, or the signal is not emitted at all, or not accepted reflected signal. In norm it can only be removed when the mask is placed on the surface of the table up sensor. If such a signal is heard when the mask is worn on the face, it can be assumed that the closed edge of the mask is dirty or one of the three holes of the sensor located on the side of the right eye. Perhaps mechanical was damaged one of the sensor elements. "Treatment" is simple – it is necessary to slightly undercut the edge of the fabric covering the sensor and clean with cotton swab moistened with alcohol, the "eyes" of the sensor. Mechanical damage requires the repair or replacement of the damaged element of the sensor.

The second error signal is a constant private long signals "PI and" with a pause between them. If You hear this beep, it means that the sensor takes too strong reflected signal. This can occur either when too tight a grip on the mask to the surface of the eye, or in the case when the holes of the sensor hangs any mask element, which is a reflection. This may be the edge of the soft gasket or otogrevshis the edge of the fabric of the mask overhanging the openings of the sensor movements of the eyes. Despite the fact that the mask is made of black fabric, the wonderful sensor signal is reflected from the surface of that tissue. To resolve this problem easily with the help of small scissors or a sharp knife.
What to do if the test is absolutely fine and the device works very rarely on eye movements night? All people are different, eyes are located at different distances from each other, eye movements during sleep are stronger or weaker, the skin of the eyelids may have a different degree of reflection due to excessive dryness or greasiness, etc. for such special occasions is for setting the sensitivity of the sensor eye movements, available through the web interface as all other instrument settings. The standard setting of the sensitivity of the sensor is "4" (not to be confused with quantity sensitivity). This level roughly corresponds to the sensitivity of the early instruments from the series "DreamStalker" (in which she couldn't be adjusted). To increase the sensitivity of this setting should reduce, not increase! Put – "3" in the morning and look at the statistics of positives. Should be monitored a significant increase. If it is still not enough, try the value 2. Also in the device there is a setting related to the sensitivity of the sensor only during the monitoring of the dreaming, called "quantitative sensitivity of the sensor eye movements". This setting shows the number of times should be detected by the eye movement over a certain period of time for actuation of the device. To increase the sensitivity to eye movements this setting should also decrease, not increase! The default value is 5, it can be reduced or, conversely, to increase (zoom only when necessary to reduce sensitivity)
.
Today turned on device default settings. Closer to 150 minutes of wearing the mask, my eyes were opened, slowly moved them in different directions and suddenly my right eye blinking red light. I waited a minute or two after you stop flashing, and again moved his eyes in different directions. Again worked the red light was blinking ten times. Then looked up the number of positives, there were 2.
Why the sensor went off 2 times in the blank?

Copying from the text:

To resolve the problem, you should first test the sensor eye movements. To do this, connect to the device via wifi and do a factory reset to set the sensor sensitivity and other settings as "default". Please wait until the device will boot and will give a melodious tone. Again connect to the device via Wi-Fi and turn on the test mode of the sensor movements of the eyes.


I didn't change anything in the settings, then device all in a state of "default"?<

User avatar
Андрей Кабанков
Автор сайта
Posts:3875
Joined:Fri Mar 31, 2006 8:19
Location:Москва
Has thanked: 1 time
Been thanked: 182 times
Contact:

Re: Questions on Ultra DreamStalker

Post by Андрей Кабанков » Thu Sep 27, 2018 20:59

What it means to work for nothing? You have led eyes, the sensor is triggered, given a hint, what's wrong?
In your view should be some other way?

мама Вовки
Posts:23
Joined:Sat Sep 22, 2018 16:36

Re: Questions on Ultra DreamStalker

Post by мама Вовки » Thu Sep 27, 2018 21:19

Андрей Кабанков wrote:What it means to work for nothing? You have led eyes, the sensor is triggered, given a hint, what's wrong?
In your view should be some other way?
I have read here that the device only reacts to certain eye movements in the REM phase and they differ from eye movements during wakefulness.
What is my idea?

User avatar
Андрей Кабанков
Автор сайта
Posts:3875
Joined:Fri Mar 31, 2006 8:19
Location:Москва
Has thanked: 1 time
Been thanked: 182 times
Contact:

Re: Questions on Ultra DreamStalker

Post by Андрей Кабанков » Thu Sep 27, 2018 21:34

The device has a program which prompts for a particular algorithm to eliminate false positives from random movements, which allows the detection of phase BDG. This is not happening due to some specific eye movements.
Depending on the plot of the dream, you move your eyes, just as you do when awake.
The notion that eye movement , which you have done something different for the sensor from what happens in the dream, just raises questions.
Sensor is still ,important repetitive movements in time. Generally , during sleep the eyes are usually closed, it would be correct to make an assessment of correctness of work, at least their closing. Modes for sleep with open eyes in the development of the product is not envisaged in principle.

мама Вовки
Posts:23
Joined:Sat Sep 22, 2018 16:36

Re: Questions on Ultra DreamStalker

Post by мама Вовки » Thu Oct 04, 2018 14:12

Checked the sensor eye movements. After long signals, he began a short signal to respond to every movement of the pupil with the eyes closed. Many times I have moved the pupil and each time was the signal. Sometimes he included a sharp long beep. The edge mask sensors is not closed.

Wearing a mask at night, had dreams, woke up and again had dreams. In the morning took it off, her top was burning and the red light was blinking green. As it should be? Positives was not.

I began to check the mask in the day, wore two hours later after turning, I saw 2 flares. Then she went to sleep, looked sleep )) , after waking up with his eyes closed began to move pupils as verification, instrument response was no. Took off the mask, it burned 2 bulbs, red and green, green and then off. Positives was not.

Question: What to do next?

Александр (разработчик)
Posts:813
Joined:Sun Dec 16, 2007 12:24
Location:Москва
Has thanked: 6 times
Been thanked: 18 times

Re: Questions on Ultra DreamStalker

Post by Александр (разработчик) » Thu Oct 04, 2018 15:23

мама Вовки wrote:Sometimes he joined sharp long beep.
mom VovaYou had a signal error that says the sensor close to the extreme position. If You're in a dream just squeeze the mask on your face or will shift aside, the parameters of the sensor signal can go outside the area, and the sensor will no longer respond.

The second error signal is a constant private long signals "PI and" with a pause between them. If You hear this beep, it means that the sensor takes too strong reflected signal. This can occur either when too tight a grip on the mask to the surface of the eye, or in the case when the holes of the sensor hangs any mask element, which is a reflection. This may be the edge of the soft gasket or otogrevshis the edge of the fabric of the mask overhanging the openings of the sensor movements of the eyes. Despite the fact that the mask is made of black fabric, the wonderful sensor signal is reflected from the surface of that tissue.

You need a photo region of the sensor (on the lower side of the mask). Large and legible.

мама Вовки
Posts:23
Joined:Sat Sep 22, 2018 16:36

Re: Questions on Ultra DreamStalker

Post by мама Вовки » Fri Oct 05, 2018 14:23

Александр (разработчик) wrote:
mom VovaYou had a signal error that says the sensor close to the extreme position. If You're in a dream just squeeze the mask on your face or will shift aside, the parameters of the sensor signal can go outside the area, and the sensor will no longer respond.
This is understandable, at night something can move, although at the time this device is generally useless, since he due to ( slightly) shift is not triggered. Why is the day after 150 minutes of exposure it does not respond to movement of the closed eyes, and when you open them and blink a few times in the green circle starts to blink? The low sensitivity of the sensor?
But then why after that flashing it yourself in a few minutes starts to work, even though his eyes were generally closed and not moving? As if he suddenly sensitivity was, well, very high ))) the impression that he could detect the REM phase, and if so, then all other actions are useless.

You need quality photos I can't do without a flash dark, with the flash glare.

I want this mask to be changed. I need a quality device with reliable motion sensor to the eye and with sufficient slots for the sensors. That only I configured it while I was there looking for faults.

When I go to the store?

Александр (разработчик)
Posts:813
Joined:Sun Dec 16, 2007 12:24
Location:Москва
Has thanked: 6 times
Been thanked: 18 times

Re: Questions on Ultra DreamStalker

Post by Александр (разработчик) » Fri Oct 05, 2018 15:21

мама Вовки wrote:You Need photo I can't do without a flash dark, with the flash glare.
But can't you try to take a photo without flash, but under a lamp or outside window? It is possible that the problem is very easy solved, and You don't have to spend your time on the trip.

мама Вовки
Posts:23
Joined:Sat Sep 22, 2018 16:36

Re: Questions on Ultra DreamStalker

Post by мама Вовки » Fri Oct 05, 2018 16:39


Александр (разработчик)
Posts:813
Joined:Sun Dec 16, 2007 12:24
Location:Москва
Has thanked: 6 times
Been thanked: 18 times

Re: Questions on Ultra DreamStalker

Post by Александр (разработчик) » Fri Oct 05, 2018 17:19

mom Vova, right around the holes it is necessary to do as well as it made the left around the holes. I mean, it is necessary to carefully trim the edge of the mask. After adjustment, recheck the sensor in test mode. Try all the posture in which You sleep, make specially a small offset of the mask - sensor should work fine, without giving signals of errors. Write about the test result. Then I can tell You that you can change in the settings that You have it worked without problems. I hope that in the near future the problem will be solved.

мама Вовки
Posts:23
Joined:Sat Sep 22, 2018 16:36

Re: Questions on Ultra DreamStalker

Post by мама Вовки » Sat Oct 06, 2018 16:19

Александр (разработчик) wrote:mother Vova, right around the holes it is necessary to do as well as it made the left around the holes. I mean, it is necessary to carefully trim the edge of the mask. After adjustment, recheck the sensor in test mode. Try all the posture in which You sleep, make specially a small offset of the mask - sensor should work fine, without giving signals of errors. Write about the test result. Then I can tell You that you can change in the settings that You have it worked without problems. I hope that in the near future the problem will be solved.
Alexander (developer)I did nothing around no holes, just when photographing pulled the material with one hand holding and the other point and clicked and was not comfortable.

I'm not going to cut it on the new device, which would not have a situation that my not enough skilled hands and not quite nail scissors where something has damaged and the unit was not warranty. Do, please, it's all what you think is right for the job. And I will be very grateful if as a bonus for my trouble You put the timer from 150 minutes to 60 minutes.

When I arrive at the store?

Александр (разработчик)
Posts:813
Joined:Sun Dec 16, 2007 12:24
Location:Москва
Has thanked: 6 times
Been thanked: 18 times

Re: Questions on Ultra DreamStalker

Post by Александр (разработчик) » Sat Oct 06, 2018 17:28

мама Вовки wrote:When me come in the store?
In the sales office can't find me, because the question is not for me, better call the telephone number listed here on the site. This, incidentally, is very good that You personally come to the office. Especially great would be if you do it from Monday to Thursday.

User avatar
Андрей Кабанков
Автор сайта
Posts:3875
Joined:Fri Mar 31, 2006 8:19
Location:Москва
Has thanked: 1 time
Been thanked: 182 times
Contact:

Re: Questions on Ultra DreamStalker

Post by Андрей Кабанков » Sat Oct 06, 2018 20:46

mom Vovajudging by the description of the test mode, the device operates normally.
The response time is easy to change in accordance with the user manual.
If this causes difficulty, it is better to abandon the use of the device and look for other exit options to the OS that are not associated with the need to manage technical means.
The device can be returned.

Александр (разработчик)
Posts:813
Joined:Sun Dec 16, 2007 12:24
Location:Москва
Has thanked: 6 times
Been thanked: 18 times

Re: Questions on Ultra DreamStalker

Post by Александр (разработчик) » Sat Oct 06, 2018 21:02

mom Vovapity, of course, that changing the settings is causing You difficulty. You could just downsize the sensitivity to movements of the eyelids to 1-2 or decrease the sensitivity of the sensor up to 3 units. Everything worked.

User avatar
Андрей Кабанков
Автор сайта
Posts:3875
Joined:Fri Mar 31, 2006 8:19
Location:Москва
Has thanked: 1 time
Been thanked: 182 times
Contact:

Re: Questions on Ultra DreamStalker

Post by Андрей Кабанков » Sat Oct 06, 2018 21:19

The beauty of version ULTRA is that it can be adjusted within 10 minutes.
All parameters visible on the screen of the smartphone, the test mode allows you to select individual setup.
The parameters are changed, put on a mask , twisted closed eyes, looked how she responds. All)

мама Вовки
Posts:23
Joined:Sat Sep 22, 2018 16:36

Re: Questions on Ultra DreamStalker

Post by мама Вовки » Sun Oct 07, 2018 20:44

I'm not against the use of the instrument, honestly! I even wonder how he'll fit in with the dream and how I will react.
I just want to get it properly trimmed and otherwise tested)). And then I enthusiastically and with pleasure will use all your advice for setting up the product for themselves.

Post Reply