Version of the program and the electronic Board DREAMSTALKER PRO
Posted: Wed Jul 29, 2009 18:28
program Version DREAMSTALKER PRO:
Version 1.00 - The initial version.
Manual V1.00: http://shemki.ru/dreamstalker/DreamStalkerPRO_V1.00.pdf.
Version 1.01 - Changed the testing algorithm of the audio codec when the device is turned on, the operation is not affected.
Version 1.02 - In the menu EnSE added Speaker [SP-1] for controlling on / off of the internal speaker. A value of 0 - speaker always off, sound is output only on earphones. A value of 1 speaker always on, sound is output to the speaker and headphones at the same time. In previous versions used the electronic automatic switching of the sound output when connecting / disconnecting the headphone. However, operation of the devices showed that due to the different characteristics of different models of headphones, and also the operation of the device in high humidity conditions (which often occurs during sleep), possible false alarms electronic sensor, headphone connection, and there is a wrong direction of the sound output. For example, when connected to the instrument with headphones could include a sound output to the speaker.
Manual V1.02: http://shemki.ru/dreamstalker/DreamStalkerPRO_V1.02.pdf.
Version 1.03 - According to the wishes of the users made changes to the duplex mode. Now the cycle of revival will not happen again and the unit will return to clock mode if You turn off the device by movement of the eyes in duplex mode. This is done in order to enable You (without giving out unnecessary clues) as long as you want to be in a state of lucid dreaming, and coming out of it, would be able to sleep until morning without waking in the REM phases.
Manual V1.03: http://shemki.ru/dreamstalker/DreamStalkerPRO_V1.03.pdf.
Version V1.04
1. Fixed a minor error amp control sound when you check the reality in the phase of issuing tips, that causes light clicks from the speaker to the end of the issue hints after checking the reality CHECK button.
2. When you run the program now the display first shows the version number of the installed software (for this version of F1.04).
3. Message "SD and batt test" when you start the program reduced to one word "test". Testing functionality remains the same.
Manual V1.04: http://shemki.ru/dreamstalker/DreamStalkerPRO_V1.04.pdf.
Version V1.05
Introduced a regulation of power of vibration in the range from 10% to 100% in increments of 10%. Now setting FL-X can take a value of 0 when the vibration is turned off, and values from 1 to 9 to enable vibration with the corresponding capacity. This version of the program will be installed on new devices equipped with high power vibrators.
Manual V1.05: http://shemki.ru/dreamstalker/DreamStalkerPRO_V1.05.pdf.
Version V1.06
Simplified menu operation the settings of the device. From the menu automatically hides items that are in the selected mode will have no impact on the operation of the device:
1. Preset selection (UP-X) appears in the menu only when off the duplex mode (du-0);
2. Manual settings appear in the menu only when they are used (i.e. when the mode is turned UP-0).
Manual V1.06: http://shemki.ru/dreamstalker/DreamStalkerPRO_V1.06.pdf.
Version V1.07 - September 2013
Added special modes of technological testing of the individual components used for production only. The user of these modes available. Manual fully complies with the V1.06.
Version V1.08 - October 2013
Added reset settings to the default state when you start the basic test of the device. User mode the basic test is not available. This mode is used during production and for inspection before the sale. Manual fully complies with the V1.06.
Version 1.07 and 1.08 will be available before the first quarter of 2014 changes important only for production and pre-testing, but does not affect the operation of the device.
Archive files to a microSD card (suitable for all versions): https://cloud.mail.ru/public/C5wg/VEHcCwKWb.
Version PCB DREAMSTALKER PRO:
Board device has the appropriate markings at the bottom right:
PCB V1 - initial version of the Board.
PCB V2 - the following changes were made:
1. Fixed a problem determining the lack of SD card in the slot when pollution charges;
2. Adjusted control circuit for the vibrator (vibrator could be activated for a short time at the time of restarting the program at pollution Board);
3. The seat under the vibrator is changed in order to install vibrators in special casing-holder.
PCB V3 - made corrective changes under the changed technical requirements of production. In the operation of the device these changes have no effect.
PCB V4EP - installed a different type of slot under microSD, in connection with the discontinuation of the former type. In the operation of the device these changes have no effect.<
Version 1.00 - The initial version.
Manual V1.00: http://shemki.ru/dreamstalker/DreamStalkerPRO_V1.00.pdf.
Version 1.01 - Changed the testing algorithm of the audio codec when the device is turned on, the operation is not affected.
Version 1.02 - In the menu EnSE added Speaker [SP-1] for controlling on / off of the internal speaker. A value of 0 - speaker always off, sound is output only on earphones. A value of 1 speaker always on, sound is output to the speaker and headphones at the same time. In previous versions used the electronic automatic switching of the sound output when connecting / disconnecting the headphone. However, operation of the devices showed that due to the different characteristics of different models of headphones, and also the operation of the device in high humidity conditions (which often occurs during sleep), possible false alarms electronic sensor, headphone connection, and there is a wrong direction of the sound output. For example, when connected to the instrument with headphones could include a sound output to the speaker.
Manual V1.02: http://shemki.ru/dreamstalker/DreamStalkerPRO_V1.02.pdf.
Version 1.03 - According to the wishes of the users made changes to the duplex mode. Now the cycle of revival will not happen again and the unit will return to clock mode if You turn off the device by movement of the eyes in duplex mode. This is done in order to enable You (without giving out unnecessary clues) as long as you want to be in a state of lucid dreaming, and coming out of it, would be able to sleep until morning without waking in the REM phases.
Manual V1.03: http://shemki.ru/dreamstalker/DreamStalkerPRO_V1.03.pdf.
Version V1.04
1. Fixed a minor error amp control sound when you check the reality in the phase of issuing tips, that causes light clicks from the speaker to the end of the issue hints after checking the reality CHECK button.
2. When you run the program now the display first shows the version number of the installed software (for this version of F1.04).
3. Message "SD and batt test" when you start the program reduced to one word "test". Testing functionality remains the same.
Manual V1.04: http://shemki.ru/dreamstalker/DreamStalkerPRO_V1.04.pdf.
Version V1.05
Introduced a regulation of power of vibration in the range from 10% to 100% in increments of 10%. Now setting FL-X can take a value of 0 when the vibration is turned off, and values from 1 to 9 to enable vibration with the corresponding capacity. This version of the program will be installed on new devices equipped with high power vibrators.
Manual V1.05: http://shemki.ru/dreamstalker/DreamStalkerPRO_V1.05.pdf.
Version V1.06
Simplified menu operation the settings of the device. From the menu automatically hides items that are in the selected mode will have no impact on the operation of the device:
1. Preset selection (UP-X) appears in the menu only when off the duplex mode (du-0);
2. Manual settings appear in the menu only when they are used (i.e. when the mode is turned UP-0).
Manual V1.06: http://shemki.ru/dreamstalker/DreamStalkerPRO_V1.06.pdf.
Version V1.07 - September 2013
Added special modes of technological testing of the individual components used for production only. The user of these modes available. Manual fully complies with the V1.06.
Version V1.08 - October 2013
Added reset settings to the default state when you start the basic test of the device. User mode the basic test is not available. This mode is used during production and for inspection before the sale. Manual fully complies with the V1.06.
Version 1.07 and 1.08 will be available before the first quarter of 2014 changes important only for production and pre-testing, but does not affect the operation of the device.
Archive files to a microSD card (suitable for all versions): https://cloud.mail.ru/public/C5wg/VEHcCwKWb.
Version PCB DREAMSTALKER PRO:
Board device has the appropriate markings at the bottom right:
PCB V1 - initial version of the Board.
PCB V2 - the following changes were made:
1. Fixed a problem determining the lack of SD card in the slot when pollution charges;
2. Adjusted control circuit for the vibrator (vibrator could be activated for a short time at the time of restarting the program at pollution Board);
3. The seat under the vibrator is changed in order to install vibrators in special casing-holder.
PCB V3 - made corrective changes under the changed technical requirements of production. In the operation of the device these changes have no effect.
PCB V4EP - installed a different type of slot under microSD, in connection with the discontinuation of the former type. In the operation of the device these changes have no effect.<