Zapper

User avatar
Смелый
Posts:2720
Joined:Thu Nov 19, 2009 13:19
Location:Владивосток
Has thanked: 2 times
Been thanked: 79 times

Post by Смелый » Thu Sep 02, 2010 7:42

Good day!
You mention the Zapper. I just found it on the Internet and was discharged, though not yet paid. Haven't sent. Decided just in case to consult with you. If you can certainly.
In the description of the instrument is two frequencies. That they have fixed, or you can put any? When it is done, you have something else to buy or in the device this is?
Sincerely, Alexander!

User avatar
Смелый
Posts:2720
Joined:Thu Nov 19, 2009 13:19
Location:Владивосток
Has thanked: 2 times
Been thanked: 79 times

Post by Смелый » Thu Sep 02, 2010 8:58

The previous post addressed the MerKaBah, but the Park pushed the wrong button

User avatar
+ангел
Posts:121
Joined:Sun May 09, 2010 14:52

Post by +ангел » Thu Sep 02, 2010 10:10

Bold how much goes Zapper delivery ?
it is easier to do it yourself there's such a simple circuit and parts on its Assembly will require no more than 200 rubles even understand how some sellers in the West asking for it are crazy money :wiz
Last edited by +ангел on Thu Sep 02, 2010 10:21, edited 1 time in total.

User avatar
Шалтай Балтай
Разработчик
Posts:3392
Joined:Tue Sep 01, 2009 12:22
Location:Москва
Has thanked: 125 times
Been thanked: 263 times
Contact:

Post by Шалтай Балтай » Thu Sep 02, 2010 10:20

Смелый wrote:In the description of the instrument is two frequencies. That they have fixed, or you can put any? When it is done, you have something else to buy or in the device this is?
Keep up to date if you can - it's interesting
IMHO - frequency - fixed.
What Zapper did you order? - a lot of them
it is a little different and the set of frequencies there is another.
+ангел wrote:it's easier to do it yourself there's such a primitive scheme and details on its Assembly will require no more than 200 rubles even understand how some sellers in the West asking for it are crazy money
it is interesting
but IMHO 200 R - miss
there is in addition the generator is also orgone generator
so IMHO some materials bucks 20 minimum
Image

User avatar
+ангел
Posts:121
Joined:Sun May 09, 2010 14:52

Post by +ангел » Thu Sep 02, 2010 10:25

Humpty Baltay I meant only electric circuit diagram collected on 555 timer square-wave generator
and those sellers that only sell the blocks with this pattern without orgone generator

User avatar
Смелый
Posts:2720
Joined:Thu Nov 19, 2009 13:19
Location:Владивосток
Has thanked: 2 times
Been thanked: 79 times

Post by Смелый » Thu Sep 02, 2010 11:23

+ангел wrote:Humpty Baltay I meant only electric circuit diagram collected on 555 timer square-wave generator
and those sellers that only sell the blocks with this pattern without orgone generator
This supposedly made in Ukraine, please 1400 rubles without delivery. http://www.zapperclark.com/modules.php? ... oods&pid=8
Doubt, no normal big pictures, this is what the Datasheet doesn't open.

User avatar
+ангел
Posts:121
Joined:Sun May 09, 2010 14:52

Post by +ангел » Thu Sep 02, 2010 12:00

Here on this link there is a scheme on which they are soldered

http://www.zapperclark.com/modules.php? ... E%F1%FB#38
Last edited by +ангел on Thu Sep 02, 2010 12:10, edited 2 times in total.

User avatar
Шалтай Балтай
Разработчик
Posts:3392
Joined:Tue Sep 01, 2009 12:22
Location:Москва
Has thanked: 125 times
Been thanked: 263 times
Contact:

Post by Шалтай Балтай » Thu Sep 02, 2010 12:06

interesting topic
maybe ask the moderators a separate branch to do?

User avatar
+ангел
Posts:121
Joined:Sun May 09, 2010 14:52

Post by +ангел » Thu Sep 02, 2010 12:15

who will collect this scheme to replace mikroshemka MC1455 can such analogues GL555, LM555, NE555, UPC1555, RC555
and here it Datasheet maybe someone will need
http://pdf.eicom.ru/datasheets/on_semic ... v1455b.pdf
Last edited by +ангел on Thu Sep 02, 2010 12:31, edited 1 time in total.

МерКаБа
Posts:844
Joined:Wed Aug 19, 2009 21:38
Has thanked: 7 times
Been thanked: 25 times

Post by МерКаБа » Thu Sep 02, 2010 12:23

Bold
I think there will be a fixed frequency, once in the description they are listed. Zapperi is on 5075 and 32000Гц, there is generally only at 15Hz, there is a trimming.

User avatar
Смелый
Posts:2720
Joined:Thu Nov 19, 2009 13:19
Location:Владивосток
Has thanked: 2 times
Been thanked: 79 times

Post by Смелый » Thu Sep 02, 2010 12:28

МерКаБа wrote:Bold
I think there will be a fixed frequency, once in the description they are listed. Zapperi is on 5075 and 32000Гц, there is generally only at 15Hz, there is a trimming.
Got it, thanks! I buy him going for these frequencies, I wanted to work with SP according to the methods that you posted.

МерКаБа
Posts:844
Joined:Wed Aug 19, 2009 21:38
Has thanked: 7 times
Been thanked: 25 times

Post by МерКаБа » Thu Sep 02, 2010 14:10

Important point! Logan recommends to grab on the device, the right hand at the base of the device (bottom SP) and left out (crystal SP).

User avatar
+ангел
Posts:121
Joined:Sun May 09, 2010 14:52

Post by +ангел » Fri Sep 17, 2010 12:36

Hi guys who are too lazy to collect the generator of rectangular pulses aka Zapper, you can buy a designer KIT
The generator is designed to generate rectangular pulses with a frequency of 250 - 16000 Hz
if desired, the lower frequency range may displace below 250 Hertz , price humane 390 rubles
http://www.masterkit.ru/main/set.php?code_id=17704
and then give a discount when you purchase 3 pieces http://www.electronshik.ru/item/kit-ns047-17704


and even has about it the video review
http://video.yandex.ru/users/sales-chip ... view/1485/
and buy one yet the device is a multimeter capable of measuring frequency ,in order to accurately set the frequency which the truth is have a little swim as it has no quartz stabilization of frequency and power, it is desirable to use high-quality stabilized voltage source, even though he already has in the scheme of three-stabilizer
Last edited by +ангел on Fri Sep 17, 2010 12:48, edited 1 time in total.

User avatar
+ангел
Posts:121
Joined:Sun May 09, 2010 14:52

Post by +ангел » Fri Sep 17, 2010 12:44

Hi, here discussion-Medical device Zapper (Zapper) from a set of NS047
http://www.masterkit.ru/forum/viewtopic.php?t=28657

User avatar
Шалтай Балтай
Разработчик
Posts:3392
Joined:Tue Sep 01, 2009 12:22
Location:Москва
Has thanked: 125 times
Been thanked: 263 times
Contact:

Post by Шалтай Балтай » Fri Sep 17, 2010 12:50

+ангел wrote:if desired, the lower frequency range may displace below 250 Hz
try, make.
let's see what the results will be.
I guess that such a "curve" scale on the instrument Welz, it's not just...

User avatar
+ангел
Posts:121
Joined:Sun May 09, 2010 14:52

Post by +ангел » Fri Sep 17, 2010 15:10

With this set NS047 until I can work now undone industrial output of the pulse generator G3-102, it gives a sine wave into a rectangular pulse and not enough time
here it is http://www.etalonpribor.ru/generatori_s ... chastotniy_/
Humpty Baltay on frequencies I have not experimented this is a very serious topic, a few lives is not enough to become an expert in this field is still cleared only to draw data from other researchers and that information requires a deep check
here is the description of a small set of frequencies http://translate.googleusercontent.com/ ... fqx2ubsmhA

User avatar
Шалтай Балтай
Разработчик
Posts:3392
Joined:Tue Sep 01, 2009 12:22
Location:Москва
Has thanked: 125 times
Been thanked: 263 times
Contact:

Post by Шалтай Балтай » Fri Sep 17, 2010 15:35

+ангел wrote:Humpty Baltay on frequencies I have not experimented this is a very serious topic, a few lives is not enough to become an expert in this area

no, You did not understand me
it would be interesting just to collect the generator of AF, as low as possible frequency IMHO it's not as easy or coating the frequencies will be very crooked....

User avatar
Свами Доупаду
Posts:175
Joined:Sun May 16, 2010 23:07
Location:КиевЪ

Post by Свами Доупаду » Fri Sep 17, 2010 23:16

+ангел wrote:,now undone industrial output of the pulse generator G3-102, it gives a sine wave into a rectangular pulse
-It may make sense not to redo the exit,and make a console-driver ,because the sine wave may be needed, there is rather more urgent question to agree the output impedance of the generator (600 Ohm) with the resistance of your coil ..(Om unit)

User avatar
+ангел
Posts:121
Joined:Sun May 09, 2010 14:52

Post by +ангел » Sat Sep 18, 2010 11:23

Свами Доупаду wrote:
+ангел wrote:,now undone industrial output of the pulse generator G3-102, it gives a sine wave into a rectangular pulse
-It may make sense not to redo the exit,and make a console-driver ,because the sine wave may be needed, there is rather more urgent question to agree the output impedance of the generator (600 Ohm) with the resistance of your coil ..(Om unit)
Yes Swami Dopado I didn't mean it exactly the console driver for the rectangular pulse and maybe one more triangular as the sine wave itself is very valuable
and output impedance it is possible to change there is a switch on 600 ω and nizkoomnyj load and interestingly connected the usual column and include a generator and try to switch the resistance of the output sound intensity does not change

User avatar
+ангел
Posts:121
Joined:Sun May 09, 2010 14:52

Post by +ангел » Sat Sep 18, 2010 11:59

Шалтай Балтай wrote:
+ангел wrote:Humpty Baltay on frequencies I have not experimented this is a very serious topic, a few lives is not enough to become an expert in this area

no, You did not understand me
it would be interesting just to collect the generator of AF, as low as possible frequency IMHO it's not as easy or coating the frequencies will be very crooked....
Humpty Baltay try to use the formula for calculating the frequency of the generator the link there is a formula, theoretically, this scheme may squeeze the frequency from 1 Hertz
it is necessary then to purchase two generators, one to alter the frequency to 250 Hz (probably the calculation would yield a completely different upper frequency range) or if you don't need above 250 then one
or to make the switching frequency on one generator through the switch and do not forget that the frequency stability is very dependent on the selected items there is a special series of variable resistors whose drift is minimal but they can be expensive, same applies to capacitors ,and on the other hand maybe it's good that the little floats, why do we rigidly tied to specific frequencies, the body is such an interesting substance that everything is very quickly accustomed
http://www.joyta.ru/619-opisanie-tajmera-ne555/ :) :)
Pulse frequency depends on the values of C, R1 and R2, and is calculated according to the above formula the link

Resistance R1 and R2 are in ohms;

The capacitance of the capacitor C in farads;

The result obtained in Hertz. :) :) :) :) :) :) :)
Last edited by +ангел on Sun Sep 19, 2010 9:35, edited 1 time in total.

User avatar
Свами Доупаду
Posts:175
Joined:Sun May 16, 2010 23:07
Location:КиевЪ

Post by Свами Доупаду » Sat Sep 18, 2010 22:23

+ангел wrote:
Свами Доупаду wrote:
+ангел wrote:,now undone industrial output of the pulse generator G3-102, it gives a sine wave into a rectangular pulse
-It may make sense not to redo the exit,and make a console-driver ,because the sine wave may be needed, there is rather more urgent question to agree the output impedance of the generator (600 Ohm) with the resistance of your coil ..(Om unit)
Yes Swami Dopado I didn't mean it exactly the console driver for the rectangular pulse and maybe one more triangular as the sine wave itself is very valuable
-That is ,a sine wave to generate much more complicated than a square wave, or even saw .Besides such as John Logan recommends in the manufacture of S. p. "treat" organic it sinus.signal .

User avatar
+ангел
Posts:121
Joined:Sun May 09, 2010 14:52

Post by +ангел » Sun Sep 19, 2010 8:43

Swami Dopado thank you !,I did not know that John Logan sine wave "treats" organic ,too, had this idea to connect a generator after pouring the SP and run it on all available frequencies from 17.7 to 200000 Hz

User avatar
Свами Доупаду
Posts:175
Joined:Sun May 16, 2010 23:07
Location:КиевЪ

Post by Свами Доупаду » Sun Sep 19, 2010 19:04

+ангел wrote:Swami Dopado thank you !,I did not know that John Logan sine wave "treats" organic ,too, had this idea to connect a generator after pouring the SP and run it on all available frequencies from 17.7 to 200000 Hz
-Always at your service. :D
By the way, look at the old site of Logan :
http://www.littlemountainsmudge.com/art ... curing.htm
well, in the translation from google : :)
http://translate.google.com.ua/translat ... dge.com%2F
Always Swami. :)

User avatar
+ангел
Posts:121
Joined:Sun May 09, 2010 14:52

Post by +ангел » Mon Sep 20, 2010 19:23

SWAMI !!! thank you very much Oh that's great !!! :)

User avatar
+ангел
Posts:121
Joined:Sun May 09, 2010 14:52

Post by +ангел » Sun Nov 07, 2010 17:06

Hi, the link is very explanatory diagram of sapera - generator frequency
from 1 Hertz to 1 megahertz three sine waves rectangular and triangular pulses
http://translate.google.ru/translate?hl ... 6prmd%3Div


http://translate.google.ru/translate?hl ... 6prmd%3Div

Post Reply