Zapper
- Смелый
- Posts:2720
- Joined:Thu Nov 19, 2009 13:19
- Location:Владивосток
- Has thanked: 2 times
- Been thanked: 79 times
Good day!
You mention the Zapper. I just found it on the Internet and was discharged, though not yet paid. Haven't sent. Decided just in case to consult with you. If you can certainly.
In the description of the instrument is two frequencies. That they have fixed, or you can put any? When it is done, you have something else to buy or in the device this is?
Sincerely, Alexander!
You mention the Zapper. I just found it on the Internet and was discharged, though not yet paid. Haven't sent. Decided just in case to consult with you. If you can certainly.
In the description of the instrument is two frequencies. That they have fixed, or you can put any? When it is done, you have something else to buy or in the device this is?
Sincerely, Alexander!
Bold how much goes Zapper delivery ?
it is easier to do it yourself there's such a simple circuit and parts on its Assembly will require no more than 200 rubles even understand how some sellers in the West asking for it are crazy money
it is easier to do it yourself there's such a simple circuit and parts on its Assembly will require no more than 200 rubles even understand how some sellers in the West asking for it are crazy money
Last edited by +ангел on Thu Sep 02, 2010 10:21, edited 1 time in total.
- Шалтай Балтай
- Разработчик
- Posts:3392
- Joined:Tue Sep 01, 2009 12:22
- Location:Москва
- Has thanked: 125 times
- Been thanked: 263 times
- Contact:
Keep up to date if you can - it's interestingСмелый wrote:In the description of the instrument is two frequencies. That they have fixed, or you can put any? When it is done, you have something else to buy or in the device this is?
IMHO - frequency - fixed.
What Zapper did you order? - a lot of them
it is a little different and the set of frequencies there is another.
it is interesting+ангел wrote:it's easier to do it yourself there's such a primitive scheme and details on its Assembly will require no more than 200 rubles even understand how some sellers in the West asking for it are crazy money
but IMHO 200 R - miss
there is in addition the generator is also orgone generator
so IMHO some materials bucks 20 minimum
- Смелый
- Posts:2720
- Joined:Thu Nov 19, 2009 13:19
- Location:Владивосток
- Has thanked: 2 times
- Been thanked: 79 times
This supposedly made in Ukraine, please 1400 rubles without delivery. http://www.zapperclark.com/modules.php? ... oods&pid=8+ангел wrote:Humpty Baltay I meant only electric circuit diagram collected on 555 timer square-wave generator
and those sellers that only sell the blocks with this pattern without orgone generator
Doubt, no normal big pictures, this is what the Datasheet doesn't open.
Here on this link there is a scheme on which they are soldered
http://www.zapperclark.com/modules.php? ... E%F1%FB#38
http://www.zapperclark.com/modules.php? ... E%F1%FB#38
Last edited by +ангел on Thu Sep 02, 2010 12:10, edited 2 times in total.
- Шалтай Балтай
- Разработчик
- Posts:3392
- Joined:Tue Sep 01, 2009 12:22
- Location:Москва
- Has thanked: 125 times
- Been thanked: 263 times
- Contact:
who will collect this scheme to replace mikroshemka MC1455 can such analogues GL555, LM555, NE555, UPC1555, RC555
and here it Datasheet maybe someone will need
http://pdf.eicom.ru/datasheets/on_semic ... v1455b.pdf
and here it Datasheet maybe someone will need
http://pdf.eicom.ru/datasheets/on_semic ... v1455b.pdf
Last edited by +ангел on Thu Sep 02, 2010 12:31, edited 1 time in total.
- Смелый
- Posts:2720
- Joined:Thu Nov 19, 2009 13:19
- Location:Владивосток
- Has thanked: 2 times
- Been thanked: 79 times
Got it, thanks! I buy him going for these frequencies, I wanted to work with SP according to the methods that you posted.МерКаБа wrote:Bold
I think there will be a fixed frequency, once in the description they are listed. Zapperi is on 5075 and 32000Гц, there is generally only at 15Hz, there is a trimming.
Hi guys who are too lazy to collect the generator of rectangular pulses aka Zapper, you can buy a designer KIT
The generator is designed to generate rectangular pulses with a frequency of 250 - 16000 Hz
if desired, the lower frequency range may displace below 250 Hertz , price humane 390 rubles
http://www.masterkit.ru/main/set.php?code_id=17704
and then give a discount when you purchase 3 pieces http://www.electronshik.ru/item/kit-ns047-17704
and even has about it the video review
http://video.yandex.ru/users/sales-chip ... view/1485/
and buy one yet the device is a multimeter capable of measuring frequency ,in order to accurately set the frequency which the truth is have a little swim as it has no quartz stabilization of frequency and power, it is desirable to use high-quality stabilized voltage source, even though he already has in the scheme of three-stabilizer
The generator is designed to generate rectangular pulses with a frequency of 250 - 16000 Hz
if desired, the lower frequency range may displace below 250 Hertz , price humane 390 rubles
http://www.masterkit.ru/main/set.php?code_id=17704
and then give a discount when you purchase 3 pieces http://www.electronshik.ru/item/kit-ns047-17704
and even has about it the video review
http://video.yandex.ru/users/sales-chip ... view/1485/
and buy one yet the device is a multimeter capable of measuring frequency ,in order to accurately set the frequency which the truth is have a little swim as it has no quartz stabilization of frequency and power, it is desirable to use high-quality stabilized voltage source, even though he already has in the scheme of three-stabilizer
Last edited by +ангел on Fri Sep 17, 2010 12:48, edited 1 time in total.
Hi, here discussion-Medical device Zapper (Zapper) from a set of NS047
http://www.masterkit.ru/forum/viewtopic.php?t=28657
http://www.masterkit.ru/forum/viewtopic.php?t=28657
- Шалтай Балтай
- Разработчик
- Posts:3392
- Joined:Tue Sep 01, 2009 12:22
- Location:Москва
- Has thanked: 125 times
- Been thanked: 263 times
- Contact:
With this set NS047 until I can work now undone industrial output of the pulse generator G3-102, it gives a sine wave into a rectangular pulse and not enough time
here it is http://www.etalonpribor.ru/generatori_s ... chastotniy_/
Humpty Baltay on frequencies I have not experimented this is a very serious topic, a few lives is not enough to become an expert in this field is still cleared only to draw data from other researchers and that information requires a deep check
here is the description of a small set of frequencies http://translate.googleusercontent.com/ ... fqx2ubsmhA
here it is http://www.etalonpribor.ru/generatori_s ... chastotniy_/
Humpty Baltay on frequencies I have not experimented this is a very serious topic, a few lives is not enough to become an expert in this field is still cleared only to draw data from other researchers and that information requires a deep check
here is the description of a small set of frequencies http://translate.googleusercontent.com/ ... fqx2ubsmhA
- Шалтай Балтай
- Разработчик
- Posts:3392
- Joined:Tue Sep 01, 2009 12:22
- Location:Москва
- Has thanked: 125 times
- Been thanked: 263 times
- Contact:
+ангел wrote:Humpty Baltay on frequencies I have not experimented this is a very serious topic, a few lives is not enough to become an expert in this area
no, You did not understand me
it would be interesting just to collect the generator of AF, as low as possible frequency IMHO it's not as easy or coating the frequencies will be very crooked....
- Свами Доупаду
- Posts:175
- Joined:Sun May 16, 2010 23:07
- Location:КиевЪ
-It may make sense not to redo the exit,and make a console-driver ,because the sine wave may be needed, there is rather more urgent question to agree the output impedance of the generator (600 Ohm) with the resistance of your coil ..(Om unit)+ангел wrote:,now undone industrial output of the pulse generator G3-102, it gives a sine wave into a rectangular pulse
Yes Swami Dopado I didn't mean it exactly the console driver for the rectangular pulse and maybe one more triangular as the sine wave itself is very valuableСвами Доупаду wrote:-It may make sense not to redo the exit,and make a console-driver ,because the sine wave may be needed, there is rather more urgent question to agree the output impedance of the generator (600 Ohm) with the resistance of your coil ..(Om unit)+ангел wrote:,now undone industrial output of the pulse generator G3-102, it gives a sine wave into a rectangular pulse
and output impedance it is possible to change there is a switch on 600 ω and nizkoomnyj load and interestingly connected the usual column and include a generator and try to switch the resistance of the output sound intensity does not change
Humpty Baltay try to use the formula for calculating the frequency of the generator the link there is a formula, theoretically, this scheme may squeeze the frequency from 1 HertzШалтай Балтай wrote:+ангел wrote:Humpty Baltay on frequencies I have not experimented this is a very serious topic, a few lives is not enough to become an expert in this area
no, You did not understand me
it would be interesting just to collect the generator of AF, as low as possible frequency IMHO it's not as easy or coating the frequencies will be very crooked....
it is necessary then to purchase two generators, one to alter the frequency to 250 Hz (probably the calculation would yield a completely different upper frequency range) or if you don't need above 250 then one
or to make the switching frequency on one generator through the switch and do not forget that the frequency stability is very dependent on the selected items there is a special series of variable resistors whose drift is minimal but they can be expensive, same applies to capacitors ,and on the other hand maybe it's good that the little floats, why do we rigidly tied to specific frequencies, the body is such an interesting substance that everything is very quickly accustomed
http://www.joyta.ru/619-opisanie-tajmera-ne555/
Pulse frequency depends on the values of C, R1 and R2, and is calculated according to the above formula the link
Resistance R1 and R2 are in ohms;
The capacitance of the capacitor C in farads;
The result obtained in Hertz.
Last edited by +ангел on Sun Sep 19, 2010 9:35, edited 1 time in total.
- Свами Доупаду
- Posts:175
- Joined:Sun May 16, 2010 23:07
- Location:КиевЪ
-That is ,a sine wave to generate much more complicated than a square wave, or even saw .Besides such as John Logan recommends in the manufacture of S. p. "treat" organic it sinus.signal .+ангел wrote:Yes Swami Dopado I didn't mean it exactly the console driver for the rectangular pulse and maybe one more triangular as the sine wave itself is very valuableСвами Доупаду wrote:-It may make sense not to redo the exit,and make a console-driver ,because the sine wave may be needed, there is rather more urgent question to agree the output impedance of the generator (600 Ohm) with the resistance of your coil ..(Om unit)+ангел wrote:,now undone industrial output of the pulse generator G3-102, it gives a sine wave into a rectangular pulse
- Свами Доупаду
- Posts:175
- Joined:Sun May 16, 2010 23:07
- Location:КиевЪ
-Always at your service.+ангел wrote:Swami Dopado thank you !,I did not know that John Logan sine wave "treats" organic ,too, had this idea to connect a generator after pouring the SP and run it on all available frequencies from 17.7 to 200000 Hz
By the way, look at the old site of Logan :
http://www.littlemountainsmudge.com/art ... curing.htm
well, in the translation from google :
http://translate.google.com.ua/translat ... dge.com%2F
Always Swami.
Hi, the link is very explanatory diagram of sapera - generator frequency
from 1 Hertz to 1 megahertz three sine waves rectangular and triangular pulses
http://translate.google.ru/translate?hl ... 6prmd%3Div
http://translate.google.ru/translate?hl ... 6prmd%3Div
from 1 Hertz to 1 megahertz three sine waves rectangular and triangular pulses
http://translate.google.ru/translate?hl ... 6prmd%3Div
http://translate.google.ru/translate?hl ... 6prmd%3Div