I have everything included.the problem with the switch was originally (I gave her). It is in the negative side are not included. I removed myself
Structured water
-
Искатель-2
- Posts:318
- Joined:Sat Nov 12, 2011 21:03
-
Искатель-2
- Posts:318
- Joined:Sat Nov 12, 2011 21:03
Re: Structured water
tds meter is ?To justify positions on the x2 will make a photo report.
if tds it will increase it is easy to prove the dissolution of nuts
color - not prove, because when you activate it Paluba cloudy
-
Искатель-2
- Posts:318
- Joined:Sat Nov 12, 2011 21:03
Re: Structured water
I shower waiting for since September, I think a few weeks your report will not wait ?the Seeker-2 - I justify my opinion in the form of photos with explanatory text when it is time. No sooner and no later.
these Muscovites are not in a hurry
-
Искатель-2
- Posts:318
- Joined:Sat Nov 12, 2011 21:03
Re: Structured water
don't really understand what you mean.PS the screening tube at an average electrode - brass blackened chemical way looks and the fact that it gets dirty on the fingers, it is drinking water?
you took the curler to the contactless activation, which through the condom for the ultrasound or what ? and underneath this tube ?
Re: Structured water
not prove tdsметр in activated water shows not correct dataИскатель-2 wrote:tds meter is ?
if tds it will increase it is easy to prove the dissolution of nuts
I'm in the city have firm, which makes chemical analysis of water, about 300 rubles a sample
Искатель-2 wrote:I shower waiting for since September
Re: Structured water
LILY-P
ASD-2 for intake.
ASD-3 for outdoor application
ASD-1 (first fraction) is not being used
In short, in most cases, ASD-2,
like so..
ASD-2 for intake.
ASD-3 for outdoor application
ASD-1 (first fraction) is not being used
In short, in most cases, ASD-2,
like so..
Re: Structured water
for most purposes, including the outer reception - fraction 2.Хаст wrote:LILY-P
ASD-2 for intake.
ASD-3 for outdoor application
ASD-1 (first fraction) is not being used
In short, in most cases, ASD-2,
like so..
Faction 1 is still classified. Attempts to lift the material until failure.
in the example about chickenpox used folk (out of network) prescription) 5 part асд2 with sunflower or other oil. (used olive and in another case, the base for massage, grapeseed or another, can't remember).
a compress on the finger doing pure ASD (2). Much. BUT it is extremely effective.
ASD-3 is also used as an external, but IMHO more effective than 2ka. In addition, there are ready-made cream in which are included both factions, for example at the same sabotage I have a cream Alezan think асд2,3 and miramistina.
A good ointment.
Re: Structured water
the manufacturers are arguing with each other on the quality of the fractions. For objective reviews also do not understand. I am of the opinion that the production of Moscow (AVZ) is weaker but it still smells less.
Armavir feels - more effective but more sharply.
In the same sabotage delivery is both.
to dial a syringe without opening the bottle through the rubber stopper. I prefer to make a larger volume than recommended. The feeling is worse. For example the greatest mug. The minimum dose at this breeding will not be felt sharply, and then get used to it and will not have negative feelings for him.
Armavir feels - more effective but more sharply.
In the same sabotage delivery is both.
to dial a syringe without opening the bottle through the rubber stopper. I prefer to make a larger volume than recommended. The feeling is worse. For example the greatest mug. The minimum dose at this breeding will not be felt sharply, and then get used to it and will not have negative feelings for him.
Re: Structured water
I write about x2 (glass).Искатель-2 wrote:don't really understand what you mean.PS the screening tube at an average electrode - brass blackened chemical way looks and the fact that it gets dirty on the fingers, it is drinking water?
you took the curler to the contactless activation, which through the condom for the ultrasound or what ? and underneath this tube ?
There external electrode to the metal mesh (not known material and origin, Yes figs with it), and the inner - M4 screw, on which two rubber rings dressed "screen" - brass blackened him. ceremonies tube. At the end of it is fixed nut, chrome having contact with water. The fact of its dissolution (nuts, washers under it, and so on) does not require a TDS meter (Yes, he would not have shown, although I have not only he, but also that such a device
http://www.tehno.com/product.phtml?uid=B00120034555 with a set of reagents for the Express analysis for various impurities with high precision). So, there are rusty stains from under it appear on the plastic washer. At least once was - a finger rubbing in surprise.
the reason for their appearance I think is obvious.
And this nut I don't like. For made and chromed it I think in China that includes as - chrome- not known to anyone.
Generally I have no complaints to the author, except willful manipulation of time, because if I was promised "3 months" immediately, then the conversation would not have happened but promised then and promises every week, "Yes, tomorrow will be ready."
That's not clear and not correct IMHO.
And so - well I'm on each device can tell the bug list.
Here's an example about Kiev ekovod - already mentioned here. There he did some dichromate proclean or something similar. Stinks long and tedious....
and electrolysis with such currents is a disaster.
Or here's the St. Petersburg emerald. From new CFTO bought by relatives before the new year has died "fashionable" timer hours use, which has to beep when it's time to clean it (he stupidly believes the hours of operation of the device IMHO). So people relied on it (at first it was squeaking) and brought the device to the complete clogging. Had about 5 hours tinkering with it to clear, introducing the acid back passage, sorry, syringe him
Well don't send it for this repair ? Yes another would say that they themselves are to blame, it's not to prove that it is not food.
What about BSL - over to the next branch. Flow like the plague from below.
and so on
So x2 is not a champion among peers.
I'm just trying to be objective. See non-food materials in the device here and write about it.
And the switch is obviously a problem in one of my pieces. Another issue is that it says on the Fig test before giving to me. (or rather confused about the poles of the connector).
promised the report will be late, until I nearly offline, ran to dig the issues for fast, x2 lying on the table after the repair and inspection - not included. J3(shower) and have not received yet, although it was clearly promised the 22nd to give(I for language did not pull).
By the way the same Peter, in terms of emeralds from Peter too, the timing was just Oh, they after the payment was sent days 40 or 45, although unlike x2 serial product. But then referred to the problems of the post office.
Ie, I do not mean that it was how our mail works. And the fact that they sent it more than a month after payment scan which I did. so what happens, do not argue.
IIR. M. is a good man and a fan of his work. But this does not mean that it is not necessary to objectively evaluate what is happening.
So I appreciate that. Without additional study of iron (will do later), we have:
- nonobservance of the deadlines of the application repeatedly (not just me, there's Zombies too, which is the month I understand waiting). It would not be stated in such terms, and would be declared realistic - there would be complaints. But people it is useful to take into account.
- drinking version (x2) of non-food materials (explicit), not just in contact with the water (well, for example nylon washers, too, is not food IMHO), but also directly energized.
next, let's see what else we can find.
From this point of view (environmental kit) the same BSL-med when its bulkiness is clearly in the black.
X2 I took (and originally it was thought that if you like it get one of their pieces ndtsat on gifts and in different places) as a travel option. For example I have one relative in hospital - here it there would.
item 3 on x2, unlike emeralds and BSL-honey, I do not see where the source of pulsed power, in which I think the whole point of the process.
Why the salt? because on the short-chopped impulses objectively proven have cold transmutation.
In particular, when high energy pulses can get rid of unstable isotopes in the water.
I'm not saying that emerald or BSL do it, but I know that when plasma and micro-plasma discharges in water it occurs and is repeatedly confirmed by a number of people including me personally know.
Gerchow said something about the duty cycle of the power supply, ie I admit he ripped capacity output and water are emulsi, but mind it (power supply unit) and stated on the site power supply from USB are not.
Take the oscilloscope - see later. And yet looks like a normal low-voltage electrolytic.
Well, any experience - too experience.
I hope souls will be better (if I ever will see).
glass x2 has one plus - fast acquisition large negative ORP. But I was frankly disappointed.<
-
Искатель-2
- Posts:318
- Joined:Sat Nov 12, 2011 21:03
Re: Structured water
Michael, here I Shironosov ( http://ikar.udm.ru )wrote on skype (on the ASD-2 to the bath):
[23.02.2012 18:54:49] Valentin Shironosov: and pH at the same time??? changes
[10:38:43] Valentin Shironosov: Please measure the pH and ORP before and after (nod)
[10:40:36] Seeker: before and after
[10:49:12] Valentin Shironosov: before and after the addition of ordinary water in the ratio 1:1, 1:100
[23.02.2012 18:54:49] Valentin Shironosov: and pH at the same time??? changes
[10:38:43] Valentin Shironosov: Please measure the pH and ORP before and after (nod)
[10:40:36] Seeker: before and after
[10:49:12] Valentin Shironosov: before and after the addition of ordinary water in the ratio 1:1, 1:100
-
Владмосква
- Posts:403
- Joined:Wed Sep 22, 2010 12:14
- Has thanked: 1 time
- Been thanked: 7 times
Re: Structured water
Michael, ASD-2, in a bath with sea salt - it will be better or worse than just in the water?
Just ASD-2 is recommended in a hot bath, and sea salt in a bath of body temperature.
Just ASD-2 is recommended in a hot bath, and sea salt in a bath of body temperature.
Re: Structured water
Not sure about the salt. Check say later.
IMHO Ph is slightly zaslujivaet, I'll check it later no problem. Clean ASD - alkaline. Breeding really huge even for drinking and especially for the bath.
Shower is not received. Have setpolicy sea of outrage that "have posted about non-food materials in the public domain and all seperatists from testing." Shower promises to next week. Assures that the electrodes karovska (well, and he'll have to show rust on the nut.)
Will have to look at karovska family. It is strange to me. He emeralds on the part of saws?
and the screw is clearly not the electrode and in process gets. I understand I'm just the first who attended to this.
I'll try to fill in the nut with lacquer or wax (although I'm afraid without it would be bad with the process, will check later).
IMHO Ph is slightly zaslujivaet, I'll check it later no problem. Clean ASD - alkaline. Breeding really huge even for drinking and especially for the bath.
Shower is not received. Have setpolicy sea of outrage that "have posted about non-food materials in the public domain and all seperatists from testing." Shower promises to next week. Assures that the electrodes karovska (well, and he'll have to show rust on the nut.)
Will have to look at karovska family. It is strange to me. He emeralds on the part of saws?
I'll try to fill in the nut with lacquer or wax (although I'm afraid without it would be bad with the process, will check later).
Re: Structured water
Michael_
Today I bought ASD our Moscow AVZ...100 ml. fraction 2.
Syringe 1ml (insuline) scored fully content. Poured in a Cup of warm water (230 ml). Drank holding his nose - all right, do not vomit. Tastes like burnt matches or hardwood or what...
What I felt immediately - heartburn went away!!(I ate something in the morning).
So far nothing more...but the smell of course
Today I bought ASD our Moscow AVZ...100 ml. fraction 2.
Syringe 1ml (insuline) scored fully content. Poured in a Cup of warm water (230 ml). Drank holding his nose - all right, do not vomit. Tastes like burnt matches or hardwood or what...
What I felt immediately - heartburn went away!!(I ate something in the morning).
So far nothing more...but the smell of course
Re: Structured water
Michael_
I've already started to break for the platinum screws, say from dichloroethane (in my opinion so is called) to carve or more of any inert synthetic

I've already started to break for the platinum screws, say from dichloroethane (in my opinion so is called) to carve or more of any inert synthetic
but we souls will arrive fasterМихаил_ wrote:all theproductivity from testing
-
Искатель-2
- Posts:318
- Joined:Sat Nov 12, 2011 21:03
Re: Structured water
Michael_
response Herzigova (email me threw)
1. http://rwl.me/p0070.htm
2. read (detailed answer in a word, to quote him uncomfortable)
http://narod.ru/disk/41792673001.4afc0b ... t.doc.html
response Herzigova (email me threw)
1. http://rwl.me/p0070.htm
2. read (detailed answer in a word, to quote him uncomfortable)
http://narod.ru/disk/41792673001.4afc0b ... t.doc.html
-
Искатель-2
- Posts:318
- Joined:Sat Nov 12, 2011 21:03
Re: Structured water
or if you skopipastit will be like this:
Response designer!
Comments design comments on constructii:
Comment
1. The outer electrode is a metal mesh (not known material and origin;
Review designer:
(Catridge made of stainless steel, for water strainer series RBM 1/2 d. Italy. Certified according to international standard;
Comment
2. Internal - M4 screw to which two rubber rings wearing...;
Review designer: - stainless Steel M5 also certified in Germany to the product and officially sold in Russia by the firm "Boldoff";
Comment
3. "...wearing a "screen" - brass blackened him. ceremonies tube ...;
Review designer:
this is the "Anode" of the activator and manufactured titanium В01 (highest quality) and covered with oxide of ruthenium (From the platinum group ) because he is black , insoluble in water and honey ;
Comment
4. ...I admit that he has torn capacity output and water are emulsi, but mind it (power supply unit) and stated on the site power supply from USB are not.
Review designer:
The unit is purchased in a firm and sealed with the seal.
Comment
5. "...the drinking version (x2) of non-food materials (explicit), not just in contact with the water (well, for example nylon washers, too, is not food IMHO), but also under voltage).
Review designer:
Food kaprolon is used to support goals and naturally fulfills its role as a dielectric.
Comment
6. And the switch is obviously a problem in one of my pieces. Another issue is that it says on the Fig test before giving to me. (or rather confused about the poles of the connector).
Review designer:
Use your activator toggle switch that was faulty too, will be taken into account. All these components of the Chinese. Are currently looking for domestic defense plants. This switch is specially for the pole shift on the "Anode" and "Cathode", this is the process of electrochemical purification of metals. Physics 7th grade.
Comment
The appearance of rust.
Review designer:
Here two causes — excessive iron content in water or removal of iron from the stainless steel elements of the activator.
So the latter will eliminate the constructor of polymerisation places the removal of iron. That immediately will be integrated into the next structures.
Delays occurred for many reasons:
Because tests, not production, with suppliers not legalized contractual obligations on food kaprolon, the cartridges RBM, the platinized, to supply medical titanium, the timing as if sung to me in the least.
The same delay occurred for the reasons that the design constantly changes based on the suggestions of the testers.
Taking into account the comments made, in order to avoid the natural grief in "visual studies," water activators series "GIFTWARES" accept for execution the following steps:
1. All products like "Giftwares" the tests stop, and the devices themselves to the study to remove.
2. To check all Certificates of conformity for components from manufacturers and to provide on request.
3. These products are not brought to operational readiness for sale not imagine.
4. My apologies for the delay — didn't calculate that delivery will be delayed. These designs are not serial, and the samples of use are made under laboratory conditions, in singular instances, and naturally differ from the expected effect. Then, they are tested in order to identify all the flaws.
The Author of the letter: if we fail to collect dismantled activator Giftwares-2", ask for help via email. The best option, as filed on 6 observations, the unit is considered unsuitable, and to return the money.
PS
Due to the fact that the certificates for components are passed on to the interested party only officially, the author can contact me via e-mail and get them.
In order to resolve this story in a civilized manner, it is wise to place them on the website as a response under the relevant paragraphs of the letter, where the author of the trials of doubt.
Although this does not matter because the product is no longer sold. The accumulated material will be used in the industrial designs, in sent to interested parties for production under a different brand.
Quality ORP-meter, manufactured by different companies a General observation, they can be used only as indicators for the presence of the redox potential of. As independent devices, they do not correspond to any parameter:
readings at all different and not stable.
they do not exist in nature reference negative potential.
they have a comprehensive calibration of the device or drug.
SUMMARY: ORP-meter is a measuring device and its readings do not give the grounds to consider in laboratory tests and testing of water-based liquids.
The designer is very grateful to all the Testers for transmitted comments on the design.
With respect and gratitude for the patience of my sluggishness.
M. Gerchikov<
Response designer!
Comments design comments on constructii:
Comment
1. The outer electrode is a metal mesh (not known material and origin;
Review designer:
(Catridge made of stainless steel, for water strainer series RBM 1/2 d. Italy. Certified according to international standard;
Comment
2. Internal - M4 screw to which two rubber rings wearing...;
Review designer: - stainless Steel M5 also certified in Germany to the product and officially sold in Russia by the firm "Boldoff";
Comment
3. "...wearing a "screen" - brass blackened him. ceremonies tube ...;
Review designer:
this is the "Anode" of the activator and manufactured titanium В01 (highest quality) and covered with oxide of ruthenium (From the platinum group ) because he is black , insoluble in water and honey ;
Comment
4. ...I admit that he has torn capacity output and water are emulsi, but mind it (power supply unit) and stated on the site power supply from USB are not.
Review designer:
The unit is purchased in a firm and sealed with the seal.
Comment
5. "...the drinking version (x2) of non-food materials (explicit), not just in contact with the water (well, for example nylon washers, too, is not food IMHO), but also under voltage).
Review designer:
Food kaprolon is used to support goals and naturally fulfills its role as a dielectric.
Comment
6. And the switch is obviously a problem in one of my pieces. Another issue is that it says on the Fig test before giving to me. (or rather confused about the poles of the connector).
Review designer:
Use your activator toggle switch that was faulty too, will be taken into account. All these components of the Chinese. Are currently looking for domestic defense plants. This switch is specially for the pole shift on the "Anode" and "Cathode", this is the process of electrochemical purification of metals. Physics 7th grade.
Comment
The appearance of rust.
Review designer:
Here two causes — excessive iron content in water or removal of iron from the stainless steel elements of the activator.
So the latter will eliminate the constructor of polymerisation places the removal of iron. That immediately will be integrated into the next structures.
Delays occurred for many reasons:
Because tests, not production, with suppliers not legalized contractual obligations on food kaprolon, the cartridges RBM, the platinized, to supply medical titanium, the timing as if sung to me in the least.
The same delay occurred for the reasons that the design constantly changes based on the suggestions of the testers.
Taking into account the comments made, in order to avoid the natural grief in "visual studies," water activators series "GIFTWARES" accept for execution the following steps:
1. All products like "Giftwares" the tests stop, and the devices themselves to the study to remove.
2. To check all Certificates of conformity for components from manufacturers and to provide on request.
3. These products are not brought to operational readiness for sale not imagine.
4. My apologies for the delay — didn't calculate that delivery will be delayed. These designs are not serial, and the samples of use are made under laboratory conditions, in singular instances, and naturally differ from the expected effect. Then, they are tested in order to identify all the flaws.
The Author of the letter: if we fail to collect dismantled activator Giftwares-2", ask for help via email. The best option, as filed on 6 observations, the unit is considered unsuitable, and to return the money.
PS
Due to the fact that the certificates for components are passed on to the interested party only officially, the author can contact me via e-mail and get them.
In order to resolve this story in a civilized manner, it is wise to place them on the website as a response under the relevant paragraphs of the letter, where the author of the trials of doubt.
Although this does not matter because the product is no longer sold. The accumulated material will be used in the industrial designs, in sent to interested parties for production under a different brand.
Quality ORP-meter, manufactured by different companies a General observation, they can be used only as indicators for the presence of the redox potential of. As independent devices, they do not correspond to any parameter:
readings at all different and not stable.
they do not exist in nature reference negative potential.
they have a comprehensive calibration of the device or drug.
SUMMARY: ORP-meter is a measuring device and its readings do not give the grounds to consider in laboratory tests and testing of water-based liquids.
The designer is very grateful to all the Testers for transmitted comments on the design.
With respect and gratitude for the patience of my sluggishness.
M. Gerchikov<
-
Искатель-2
- Posts:318
- Joined:Sat Nov 12, 2011 21:03
Re: Structured water
and rightly outraged. You posted openly that you had to speak to him personally.Михаил_ wrote:Not sure about the salt. Check say later.
Shower is not received. Have setpolicy sea of outrage that "have posted about non-food materials in the public domain and all seperatists from testing." Shower promises to next week.
This is for you ****be not store. Bought - in reviews obos*** criticized.....
That hurt, really to him personally to write ?
You framed him then show your will - that he is poisoning people and so, he himself is interested in product quality, will replace and so on
-
Белый Камень
- Posts:130
- Joined:Fri Jun 17, 2011 19:53
Re: Structured water
ASD gives a pretty accurate description of production, I have experience with processes such that meter.
Not daisies, but for me personally, this is no particular problem. The effect of the ATS is confirmed, and the impact on the consciousness I didn't know, but it was only in the beginning. Pretty funny, after drinking for the first time, in silence "hung" a bit in the video where Potter pots did
Not daisies, but for me personally, this is no particular problem. The effect of the ATS is confirmed, and the impact on the consciousness I didn't know, but it was only in the beginning. Pretty funny, after drinking for the first time, in silence "hung" a bit in the video where Potter pots did
Re: Structured water
No, not right outraged.
1. I never promised anyone not to post their feedback publicly, it would be kind of a different story, this is negotiated separately and beforehand, and assumes a different relationship of the parties. This is a topic to exchange opinions about different products for water, hand-built or factory - do not care. Above it is given in General Frank is x2-J3, objective opinion here quite in cash, as opposed to in my opinion is not completely objective opinion above.
2. I'm not putting anyone out, and to protect people from possible mistakes. I think this is important. Nut is not the problem. It can be replaced. The lack of objective information is a problem.
3. I didn't ask for me to hold any talks with the author, namely posted here because I have already 7 people asked should I buy a G2 (even before asked MY personal OPINION, which is IMPORTANT to them, including selecting from multiple products) and because other people, like me, fell for the is x2-J3 given above, which, as it turns out, is not completely untrue, at least in terms. One of my lost time, for calls of the author, including the review of personal plans, cancel trips and other things - it is just a holiday for you. I changed several times the schedule of their trips in anticipation of the promised bound soul (every time new). It was enough once to say clearly longer and not fooling - I would have waited quietly and the person would not be pulled.
I was even on 31st of December promised to give the soul. I.e. 30th vowed that "I will collect and will call in the morning, try to be ready". I have my plans accordingly, and in January found out that is (if at all so) there was still power supplies. Well why did you promise something? Unless it was impossible to say that the package is not complete? strange as it sounds there is not one that I listen to it all the time. Ie, it looked and looks at least strange.
However, I would not write about it, if not try perekinuty what I wrote about G2.
I wrote only that I have problems with components and nut from under him (not from water) rust issues. Structurally designed so that the nut is also an electrode. If at this moment did not pay attention, I pay attention to, and what it has done in this quiet get-together - I see no problem in that.
Gerchikov we have a inviolable? it can not comment? will be corrosion on the nut, the iron in the water nothing to do with. I do not want anyone to return anything, though, because I'm too lazy to carry something with you (I do not live in Moscow), and the cost was originally debited to the article "the study of what it is", i.e. I was ready for the fact that I can't or don't want to use a G2.Although my expectations were very different - accordingly this is I was hoping to use as a road (compact) activator. Set on a shelf as a showpiece.
It is unclear why and what the note on the ORP meter. Here, everyone knows that its use gives approximate results.
However, if I was not at all ORP meters, then giving me a faulty Cup x2 fed me not alive, but dead water. In the working position of the switch it worked the reverse, and the other would not turn on at all. And the only use of this is not accurate ORP meter gave these things the ability to determine exactly (although the taste and smell for the 15 minute exposure was also clear).
And if it were not for ORP meter? in one switch position "not to bubble" and the other gurgles, the device in the reverse, how would I know that?
What is said about the author? he said, "the influence of the geomagnetic environment", but at the same time a couple of other devices (emerald and BSL-med) gave ORP negative water.
They say you need to enter the position, because it is not a serial product.
Possible. But I think that it would be improper for a much larger number of people than one Michal Mikhailovich, if I kept silent about what I see with my own eyes.
4.Questions about food applicability accessories emerged for obvious reasons - several times I dismantled such as their emeralds and the same BSL. And there was never a trace of rust (water obviously is the same). Immediately they were before the first activation, I (rust on the nut was once more carried in the metro, looked at it).
5. I purchased the product and think it is possible to comment the device and equipment. I also commented on the products of other manufacturers, including serial. What? and to have an exchange of views. What kind of serial production can be a speech if the author is frightened is not the first accolades? And what's wrong with that? you may want to replace the nut or cut threads in the plastic, although not all questions on the device...
PS in the meantime, the story is not over. Waiting to receive the promised shower. Today I was offered (indignantly, as I understand now because the seeker 2 has assumed the role of arbiter for sending reviews) money back, but I categorically do not like. For such a waiting time there is only one normal payment - working the product. And if it will match the stated properties, then the review will be proper, I am completely objective. And I will recommend it, if it will be available in fact (i.e., not once for the future, and now).
zy2 Yes, indeed, kaprolon, on closer examination, one is material, the contact of which with water and pisamai products are allowed. Tooth I have emerged due to the overall unpleasant sludge from the device, and corrosion in the area of the retaining nut.
I have listed a list of the places where to set a question. This question was more rhetorical than a question to the author.
That's why I didn't question the quality of steel or rubber bushings to the producers of any BSL-honey?
as I wrote above, they also have shortcomings. So what? not to write about them? Yes, why?
But the Assembly-dismantling their reactors causing other sensations. And it's not in the manual Assembly.
zy3. power supply Yes, shopping. No, not sealed. no there are no seals. But if it were redone, I would have considered this a big plus. A word about removed conder arose because on the phone I was told that depending on the power supply unit may change the result on GP, because different power supplies different duty cycle. But the duty cycle concept is applicable to pulsed signal. And the power supply output is 12 volts tenure. So either the author does not understand what is the duty cycle(a nod about the physics of the 7th class
), or not put it right (then not clearly, as it may affect the power supply if the output tenured satisfy the demands of the consuming part of the current), or get affected by the ripple (all modern power supplies pulse converters contain a small ripple at the output may be). I looked at the waveform yesterday, digital device - in fact, there is no pulsation. Under load (when the electrolysis) is a small steps at a level of about 10 millivolts, at a frequency of ~ 3.5 kHz
I strongly wish all the manufacturers of water activators, as well as manufacturers of means of structuring water to be adequate and to be able to hear criticism, at the same time to grow and do their good deeds. I don't see a reason for throwing tantrums, matyugov with asterisks and other matters.
ЗЫ4 as I understand from quickly available information of the electrode coating (if indeed it is) should not be called ruthenium oxide, and ruthenium oxide titanium (ORT), which is an insoluble conductor.<
1. I never promised anyone not to post their feedback publicly, it would be kind of a different story, this is negotiated separately and beforehand, and assumes a different relationship of the parties. This is a topic to exchange opinions about different products for water, hand-built or factory - do not care. Above it is given in General Frank is x2-J3, objective opinion here quite in cash, as opposed to in my opinion is not completely objective opinion above.
2. I'm not putting anyone out, and to protect people from possible mistakes. I think this is important. Nut is not the problem. It can be replaced. The lack of objective information is a problem.
3. I didn't ask for me to hold any talks with the author, namely posted here because I have already 7 people asked should I buy a G2 (even before asked MY personal OPINION, which is IMPORTANT to them, including selecting from multiple products) and because other people, like me, fell for the is x2-J3 given above, which, as it turns out, is not completely untrue, at least in terms. One of my lost time, for calls of the author, including the review of personal plans, cancel trips and other things - it is just a holiday for you. I changed several times the schedule of their trips in anticipation of the promised bound soul (every time new). It was enough once to say clearly longer and not fooling - I would have waited quietly and the person would not be pulled.
I was even on 31st of December promised to give the soul. I.e. 30th vowed that "I will collect and will call in the morning, try to be ready". I have my plans accordingly, and in January found out that is (if at all so) there was still power supplies. Well why did you promise something? Unless it was impossible to say that the package is not complete? strange as it sounds there is not one that I listen to it all the time. Ie, it looked and looks at least strange.
However, I would not write about it, if not try perekinuty what I wrote about G2.
I wrote only that I have problems with components and nut from under him (not from water) rust issues. Structurally designed so that the nut is also an electrode. If at this moment did not pay attention, I pay attention to, and what it has done in this quiet get-together - I see no problem in that.
Gerchikov we have a inviolable? it can not comment? will be corrosion on the nut, the iron in the water nothing to do with. I do not want anyone to return anything, though, because I'm too lazy to carry something with you (I do not live in Moscow), and the cost was originally debited to the article "the study of what it is", i.e. I was ready for the fact that I can't or don't want to use a G2.Although my expectations were very different - accordingly this is I was hoping to use as a road (compact) activator. Set on a shelf as a showpiece.
It is unclear why and what the note on the ORP meter. Here, everyone knows that its use gives approximate results.
However, if I was not at all ORP meters, then giving me a faulty Cup x2 fed me not alive, but dead water. In the working position of the switch it worked the reverse, and the other would not turn on at all. And the only use of this is not accurate ORP meter gave these things the ability to determine exactly (although the taste and smell for the 15 minute exposure was also clear).
And if it were not for ORP meter? in one switch position "not to bubble" and the other gurgles, the device in the reverse, how would I know that?
What is said about the author? he said, "the influence of the geomagnetic environment", but at the same time a couple of other devices (emerald and BSL-med) gave ORP negative water.
They say you need to enter the position, because it is not a serial product.
Possible. But I think that it would be improper for a much larger number of people than one Michal Mikhailovich, if I kept silent about what I see with my own eyes.
4.Questions about food applicability accessories emerged for obvious reasons - several times I dismantled such as their emeralds and the same BSL. And there was never a trace of rust (water obviously is the same). Immediately they were before the first activation, I (rust on the nut was once more carried in the metro, looked at it).
5. I purchased the product and think it is possible to comment the device and equipment. I also commented on the products of other manufacturers, including serial. What? and to have an exchange of views. What kind of serial production can be a speech if the author is frightened is not the first accolades? And what's wrong with that? you may want to replace the nut or cut threads in the plastic, although not all questions on the device...
PS in the meantime, the story is not over. Waiting to receive the promised shower. Today I was offered (indignantly, as I understand now because the seeker 2 has assumed the role of arbiter for sending reviews) money back, but I categorically do not like. For such a waiting time there is only one normal payment - working the product. And if it will match the stated properties, then the review will be proper, I am completely objective. And I will recommend it, if it will be available in fact (i.e., not once for the future, and now).
zy2 Yes, indeed, kaprolon, on closer examination, one is material, the contact of which with water and pisamai products are allowed. Tooth I have emerged due to the overall unpleasant sludge from the device, and corrosion in the area of the retaining nut.
I have listed a list of the places where to set a question. This question was more rhetorical than a question to the author.
That's why I didn't question the quality of steel or rubber bushings to the producers of any BSL-honey?
as I wrote above, they also have shortcomings. So what? not to write about them? Yes, why?
But the Assembly-dismantling their reactors causing other sensations. And it's not in the manual Assembly.
zy3. power supply Yes, shopping. No, not sealed. no there are no seals. But if it were redone, I would have considered this a big plus. A word about removed conder arose because on the phone I was told that depending on the power supply unit may change the result on GP, because different power supplies different duty cycle. But the duty cycle concept is applicable to pulsed signal. And the power supply output is 12 volts tenure. So either the author does not understand what is the duty cycle(a nod about the physics of the 7th class
I strongly wish all the manufacturers of water activators, as well as manufacturers of means of structuring water to be adequate and to be able to hear criticism, at the same time to grow and do their good deeds. I don't see a reason for throwing tantrums, matyugov with asterisks and other matters.
ЗЫ4 as I understand from quickly available information of the electrode coating (if indeed it is) should not be called ruthenium oxide, and ruthenium oxide titanium (ORT), which is an insoluble conductor.<
Re: Structured water
People who consume ASD!
It is not a diuretic accidentally?
For this watch begala to the wind! It's more than drank the liquid for a day out
It is not a diuretic accidentally?
For this watch begala to the wind! It's more than drank the liquid for a day out
Re: Structured water
well, permanent employment - no. At the beginning of the reception - easily for cleaning.
And it may take some time.
By the way the first few months I do not recommend the road. As to "wind up" that's okay, maybe the stomach to twist.
And it may take some time.
By the way the first few months I do not recommend the road. As to "wind up" that's okay, maybe the stomach to twist.
-
Белый Камень
- Posts:130
- Joined:Fri Jun 17, 2011 19:53
Re: Structured water
To me that is not valid, and not heard.
His beer is impossible, categorically, if that

His beer is impossible, categorically, if that
Re: Structured water
Yes I wrote above, alcohol in General (like the way MM).
-
Искатель-2
- Posts:318
- Joined:Sat Nov 12, 2011 21:03
Re: Structured water
M. M. not registered with here, he replied to my mail, and I just periadnexal (consider old hardened person and not such an active seat in the Internet as we do)(indignantly, as I understand now because the seeker 2 has assumed the role of arbiter for sending reviews)
I'm not a referee - I transmitter
I am a current one can't understand why in my version (from September I think), nothing to rust.
Maybe all this time replaced parts... He is constantly hunting for different and a lot of marriage.