NAVIGATOR-2. The new firmware 3.10
Posted: Tue Apr 24, 2018 1:25
So, comrades, it's time to upgrade the firmware for the Navigator-2. The current version (3.03), which was recorded in all the released devices were made almost a year ago, it was discovered mistakes, and she made improvements. Turned version 3.10.
the archive with the firmware navig2_v310.bin file f_write.txt
https://yadi.sk/d/oNSKqi_S3UhF4n
Manual for version 3.10 to pdf with color (large amount ~ 9.2 MB )
https://yadi.sk/i/CHQeUNug3UhG3z
Manual for version 3.10 to pdf in black and white (average size ~ 3.94 MB)
https://yadi.sk/i/gXEupl8_3UhGRu
Navigator-2 is stitched with the help of the program navprog3.exe
==================================================================
To write new firmware, do the following :
1. translate the device into the programming mode. From the menu "service" -> "replacement program".
Then to turn it off.
2. Connect to USB and switch the unit on. The screen should be black and should illuminate a white led.
3. The device should be detected by Windows.
4. Follow the programming instructions (link below) to install the driver.
Specify to install the driver link below.
5. To unzip the program for the firmware archive navprog3.zip (link below)
6. To copy one folder to the program contents of the archive with the firmware, including file f_write.txt. link to this archive is the first in the message.
7. start navprog3.exe
Driver resetter
https://yadi.sk/d/WPUrhYON3U4wjG
unzip and specify the contents of this folder during the installation !
The file is a new program for firmware Navigator 2 (referred to as navprog3.exe archived zip) :
sk/d/wiMGZE6d3UhFBs">https://yadi.sk/d/wiMGZE6d3UhFBs
Description programming. It is made even for the first program that is designed for the Navigator-1.
But its essence remains the same, except the check code of the firmware of the Navigator-2. If it is not - will not work.
https://yadi.sk/i/qNad1QPM3LBaPr<
the archive with the firmware navig2_v310.bin file f_write.txt
https://yadi.sk/d/oNSKqi_S3UhF4n
Manual for version 3.10 to pdf with color (large amount ~ 9.2 MB )
https://yadi.sk/i/CHQeUNug3UhG3z
Manual for version 3.10 to pdf in black and white (average size ~ 3.94 MB)
https://yadi.sk/i/gXEupl8_3UhGRu
Navigator-2 is stitched with the help of the program navprog3.exe
==================================================================
To write new firmware, do the following :
1. translate the device into the programming mode. From the menu "service" -> "replacement program".
Then to turn it off.
2. Connect to USB and switch the unit on. The screen should be black and should illuminate a white led.
3. The device should be detected by Windows.
4. Follow the programming instructions (link below) to install the driver.
Specify to install the driver link below.
5. To unzip the program for the firmware archive navprog3.zip (link below)
6. To copy one folder to the program contents of the archive with the firmware, including file f_write.txt. link to this archive is the first in the message.
7. start navprog3.exe
Driver resetter
https://yadi.sk/d/WPUrhYON3U4wjG
unzip and specify the contents of this folder during the installation !
The file is a new program for firmware Navigator 2 (referred to as navprog3.exe archived zip) :
sk/d/wiMGZE6d3UhFBs">https://yadi.sk/d/wiMGZE6d3UhFBs
Description programming. It is made even for the first program that is designed for the Navigator-1.
But its essence remains the same, except the check code of the firmware of the Navigator-2. If it is not - will not work.
https://yadi.sk/i/qNad1QPM3LBaPr<