Page 1 of 18

Reprogramming of the device. New firmware version

Posted: Sat Jul 30, 2011 11:40
by Алексей Крячко__
Good afternoon, gentlemen.
So we got to the need to replace the firmware.

About how to replace it is described in the programming instructionswhich is available here :
http://www.mindmachine.ru/download/navi ... tor1_1.pdf

Current firmware version 1.12 :
http://www.mindmachine.ru/download/navi ... r_v112.bin

Actually there is a built-in 114 sessions, introduced monitoring of battery voltage, fixed some previously discovered error made by the navigating the main menu for the ring of keys "left" and "right".

programming tool - is that the signature provided by the manufacturer of the processors. The main drawback - only works under Win2K and WinXP.
http://www.mindmachine.ru/download/navi ... tallsp.zip
There are alternative programs for programming the device via USB working under Vista and Win7, but they require testing, I do not yet dare to spread.

And here is the archive with device drivers that are required for programming. Driver work under XP/2000 ! May be required after installation of the programming device and connect the device, translated into the programming mode, the latter will not be detected and the system will need driver. You need to point to the unpacked folder from the archive.
http://www.mindmachine.ru/download/navi ... rv_isp.zip

PS
Download all 1 file
http://www.mindmachine.ru/download/navi ... amming.zip<

Posted: Sat Jul 30, 2011 11:49
by Алексей Крячко__
It should be noted that reprogramming of the device, beginning with removal of old firmware - the process is quite demanding. You should carefully read the instructions and if you have any doubts - better to ask here.

Posted: Sat Jul 30, 2011 12:18
by Логик
Reflash already. Everything is fine. However, when returning from a submenu thrown in the start menu, and throws.

Posted: Sat Jul 30, 2011 12:32
by Маг.нет
With Vista should wait with reprogramming?


Sincerely, MAG.no

Posted: Sat Jul 30, 2011 12:35
by Тоха
Hmm it is a pity that the wood only for XP. Good to be home 2 PC. Went to reflash. Thank you!

All preposilani.

Posted: Sat Jul 30, 2011 21:14
by Алексей Крячко__
Логик wrote:Reflash already. Everything is fine. However, when returning from a submenu thrown in the start menu, and throws.
I have not yet converted, alas. The next version will already be. This insertion is important - monitoring of food and basic session.

Posted: Sat Jul 30, 2011 21:15
by Алексей Крячко__
Маг.нет wrote:With Vista should wait with reprogramming?


Sincerely, MAG.no
Yes, I'm testing a couple of utilities that run under Vista.

Posted: Sun Jul 31, 2011 0:30
by Алексей Крячко__
Vladimir Nikonov
it would be good to put the actual description from sharing
http://narod.ru/disk/20419877001/naviga ... 1.pdf.html

And then on page Navigator link on the old stands.

Posted: Sun Jul 31, 2011 0:44
by Владимир Никонов 2

Posted: Sun Jul 31, 2011 19:16
by Ростислав
:ay

Posted: Wed Aug 03, 2011 18:14
by Практик
Good day!
The manual says: "To replace the Navigator, you must install AT91-ISP"
But where this app can download and install?

Posted: Wed Aug 03, 2011 18:46
by Андрей Кабанков
This is the third link in the first post.

Posted: Sun Aug 07, 2011 19:46
by Алексей Крячко__
About the job software for reprogramming under Vista : the existing program was quite unstable, not all of the machines work. So the only option is writing your own programmer, but it's the end of August-beginning of September.

Posted: Sun Aug 07, 2011 20:00
by Маг.нет
Wait....


Sincerely, MAG.no

Posted: Mon Aug 08, 2011 8:50
by Ростислав
I have a 7ka flash does not work :( ,
how to show the device mode firmware?

Posted: Mon Aug 08, 2011 10:15
by Андрей Патрушев
Ростислав wrote:I Have a 7ka flash does not work :( ,
how to show the device mode firmware?
Search for XP - the machine now there is nothing (from this it is impossible to withdraw can only enter:?)

Please describe in detail what You did and got. Like the seven problems was not...
Re-read the instructions carefully - it is important that the sequence in which to include...

Posted: Mon Aug 08, 2011 13:28
by Ростислав
Installed the program for the firmware, moved the device in flashing mode, connect to computer, installed the drivers as gps kamera, the program cannot find the device!
Tried to reinstall the driver on those that are in the header - not installed.

Posted: Mon Aug 08, 2011 14:03
by Логик
Rostislav
Go into control panel - system - device Manager. Looking into the list of the device.Move the cursor and click the right mouse button - update driver. Refuse to connect to the site Windows update, click next - install from a list or specific location - don't search. He will choose the driver to install - have disk. Next, slip the files that were uploaded by the Alex.

Posted: Mon Aug 08, 2011 19:46
by Ростислав
And by doing so, the driver is not suitable!

Posted: Mon Aug 08, 2011 20:06
by Логик
from the installation instructions
4) Turn on the device. To wait on the computer it will recognized as a new USB device. If it is not recognized and the system will prompt you for the driver, then it is necessary to unpack the archive "drv_ISP.zip" in the folder drv_ISP, choose when installing driver item "install from a list or specific location", then specify the path to the directory drv_ISP where is the driver and inf files. To request a digital signature, click "continue anyway".

5) Usually detect and install the device runs without any trouble (the message "new hardware is installed and ready to use" ). If instead of the driver 6124.sys the system tries to put any oem drivers, then after installing it you need to go into device Manager and remove the new USB device (not your driver still won't run and will be marked with a question mark on a yellow background). After removal turn off the power at the "Navigator" and return to step 4.

Posted: Mon Aug 08, 2011 20:58
by Тоха
Driver for Windows 7 is not suitable.it can of course be set, but operation is not guaranteed. The manual is currently written only for Windows XP. If someone is working and it is a special case of the compatibility of software and hardware. I've been in pain, but then still sewed on XP.

Posted: Mon Aug 08, 2011 21:46
by Ростислав
Logik
Thank you to all of this
it doesn't fit!

Posted: Tue Aug 09, 2011 22:10
by Алексей Крячко__
there is only the option to find a machine with XP or install additionally, XP. The utility for reprogramming, which works under win7 and vista to be developed, as existing under them brand programs work very unstable, I checked everything at home. In the manual it is just written from the beginning, under any system utility oriented programmer. If something is not, you should not try. At least for now.
I must say, the replacement of version 1.10 even I don't see now, version 1.12 functionality has changed, except the addition of monitoring battery charge. Added built-in session, but on devices with 1.10 they were all written on the memory card.

Posted: Tue Aug 09, 2011 22:22
by Ростислав
I have firmware 1.11 was! Okay I have XP install!

Posted: Tue Aug 09, 2011 23:38
by Михаил_
cough, cough..... why to install. Download on any torrent tracker decent any system with booting from the stick, installing to a USB flash drive is made in two stages - training-boot the program from the kit and copy files to a USB flash drive. Most modern computers boot from USB flash support, laptop for sure.
The flash drive will fit most small and old. And the good thing in the economy will be..... because usually these systems have a tendency to be useful for disaster recovery, primary or in other similar cases.
I have the same HP just stays in the emulator on the host computer (well there under VMware, Parallels and so on, depending on which of the computers).