Suggestions for improving.
and to me the brightness is not enough - in the sense of want is less than the minimum brightness and generally less... don't speed anyway, ie it would be nice if the keys are not there chose one of the 16 or whatever of the steps, and slowly turned the Vernier, i.e., such that there was a feeling of smooth adjustment while holding the button and the range to cover literally all of it, almost to off. In Coltrane I, this problem was solved indirectly -adjust the brightness there with hi, but the circuit operates in a voltage range, so really I was crucial the handle on the machine, thereby, a smooth brightness adjustment.
- Владимир Никонов 2
- Автор сайта
- Posts:820
- Joined:Thu Oct 26, 2006 19:52
- Location:Краснодар
- Has thanked: 20 times
- Been thanked: 28 times
- Contact:
-
- Разработчик
- Posts:321
- Joined:Tue Jul 12, 2011 18:07
- Been thanked: 17 times
As for the menu, then suggestions into account and will fail if not performed revision of the firmware (1.12) in the following.
As for brightness, the problem is also solved. You can make more adjustability. I understand all of the range is not enough, from the bottom, on low brightness and there is stepwise adjustment.
During the development I was afraid of exactly the opposite - that not enough maximum brightness. Hence the result.
However, the brightness control procedure is quite challenging and the make revision of the firmware probably will not be improved.
still, there is one feature, and in General it is of a purely physical character, so different brightness in different forms of the modulating signal. The brightest one - the rectangle, the least bright - sine. To compensate for this discrepancy can only be in the session itself, correctly setting the max brightness when you change one form of the modulating signal to another.
As for brightness, the problem is also solved. You can make more adjustability. I understand all of the range is not enough, from the bottom, on low brightness and there is stepwise adjustment.
During the development I was afraid of exactly the opposite - that not enough maximum brightness. Hence the result.
However, the brightness control procedure is quite challenging and the make revision of the firmware probably will not be improved.
still, there is one feature, and in General it is of a purely physical character, so different brightness in different forms of the modulating signal. The brightest one - the rectangle, the least bright - sine. To compensate for this discrepancy can only be in the session itself, correctly setting the max brightness when you change one form of the modulating signal to another.
- Владимир Никонов 2
- Автор сайта
- Posts:820
- Joined:Thu Oct 26, 2006 19:52
- Location:Краснодар
- Has thanked: 20 times
- Been thanked: 28 times
- Contact:
-
- Автор сайта
- Posts:10238
- Joined:Tue May 30, 2006 20:17
- Location:Екатеринбург
- Has thanked: 134 times
- Been thanked: 556 times
- Contact:
Then, too, and the shape of the signal is necessary from the console to ask. I think it's a good idea to set the color with the console, regardless of what is provided in the session (or rather to make a choice) and the waveform for a particular session. As I understand it, the technical ability to do this exists.Владимир Никонов wrote:As you may force the challenge colors for the sessions? In the glasses ColorTrack button color is set, and the Navigator through a setting in the menu.
- ЛИЛИЯ-Р
- Posts:3002
- Joined:Thu Oct 11, 2007 21:25
- Location:Москва
- Has thanked: 478 times
- Been thanked: 264 times
I also like that idea.Андрей Патрушев wrote:Vladimir Nikonov wrote(a):
And you may force the challenge colors for the sessions? In the glasses ColorTrack button color is set, and the Navigator through a setting in the menu.
Then, too, and the shape of the signal is necessary from the console to ask. I think it's a good idea to set the color with the console, regardless of what is provided in the session (or rather to make a choice) and the waveform for a particular session. As I understand it, the technical ability to do this exists.
-
- Разработчик
- Posts:321
- Joined:Tue Jul 12, 2011 18:07
- Been thanked: 17 times
-
- Разработчик
- Posts:321
- Joined:Tue Jul 12, 2011 18:07
- Been thanked: 17 times
Yes, the next revision will be done it. In the "extra modes" is the option color or more color, or set by the user. Will set the primary color, i.e., when the impulse (red, green, blue, off) and filling (pause between pulses) intervals : red, green, blue, off.Владимир Никонов wrote:As you may force the challenge colors for the sessions? In the glasses ColorTrack button color is set, and the Navigator through a setting in the menu.
-
- Разработчик
- Posts:321
- Joined:Tue Jul 12, 2011 18:07
- Been thanked: 17 times
-
- Разработчик
- Posts:321
- Joined:Tue Jul 12, 2011 18:07
- Been thanked: 17 times
- Андрей Кабанков
- Автор сайта
- Posts:3875
- Joined:Fri Mar 31, 2006 8:19
- Location:Москва
- Has thanked: 1 time
- Been thanked: 182 times
- Contact:
-
- Разработчик
- Posts:321
- Joined:Tue Jul 12, 2011 18:07
- Been thanked: 17 times
technically, it is quite possible to do, besides wav and mp3 files are physically in the instrument may be played on different codecs (there are two) and then be mixed. The only question of practical use of this.Логик wrote:Have an idea to run together not only the session and audio files but also audiostrobe disks with flash and audio files.
-
- Автор сайта
- Posts:10238
- Joined:Tue May 30, 2006 20:17
- Location:Екатеринбург
- Has thanked: 134 times
- Been thanked: 556 times
- Contact:
- Логик
- Posts:2073
- Joined:Sat Feb 21, 2009 10:43
- Location:Россия
- Has thanked: 2 times
- Been thanked: 21 times
The benefit is, it can not have! Take, for CD Andrei Patrushev "Music for hypnosis and self-hypnosis" and to combine it with recorded afirmatie. This is the easiest option.Алексей Крячко__ wrote:technically, it is quite possible to do, besides wav and mp3 files are physically in the instrument may be played on different codecs (there are two) and then be mixed. The only question of practical use of this.
Of course, I could make the mix on the computer, but I want to do without it...
He read and watched... But that's not what I need.Андрей Патрушев wrote:please Pay attention to a very interesting function "Svetanics".
- Владимир Никонов 2
- Автор сайта
- Posts:820
- Joined:Thu Oct 26, 2006 19:52
- Location:Краснодар
- Has thanked: 20 times
- Been thanked: 28 times
- Contact:
-
- Разработчик
- Posts:321
- Joined:Tue Jul 12, 2011 18:07
- Been thanked: 17 times
Now Silke right (scrolling ascending numbers) and left (descending). Down arrow or up arrow - returns you to the previous paragraph - the choice of types of sessions. You can do the opposite, or down arrow when you select sessions to use. Most likely the last I'll do.Владимир Никонов wrote:Wish: make a choice of sessions in sections more down arrow. This intuitively. Now the right arrow.
- Маг.нет
- Posts:3310
- Joined:Fri Apr 16, 2010 12:48
- Location:Сибирь
- Has thanked: 24 times
- Been thanked: 142 times
Now faced with the "open machine" and had a few suggestions:
1. Auto power off when inactivity of the device, well, for example more than 15-30 minutes (or individually);
2. The indicator of the device (a"custodian" of the monitor translates it in the extinguished state and not clear on or off the device without further manipulation);
3. (Activation of the monitor button (e.g. "light") with no other current changes (while activating change of volume)); have discovered there are
4. When listening to discs (multiple tracks, mode "F") timer forward and reverse ("from the beginning" and "until the end") on an entire folder - a few selected tracks in total;
5. A choice of several (not all) playable tracks "drive" and their order.
Maybe something of the above, and is present, I just have not got to the bottom...
Sincerely, MAG.no
1. Auto power off when inactivity of the device, well, for example more than 15-30 minutes (or individually);
2. The indicator of the device (a"custodian" of the monitor translates it in the extinguished state and not clear on or off the device without further manipulation);
3. (Activation of the monitor button (e.g. "light") with no other current changes (while activating change of volume)); have discovered there are
4. When listening to discs (multiple tracks, mode "F") timer forward and reverse ("from the beginning" and "until the end") on an entire folder - a few selected tracks in total;
5. A choice of several (not all) playable tracks "drive" and their order.
Maybe something of the above, and is present, I just have not got to the bottom...
Sincerely, MAG.no
by the way I also put batteries in his state of powitania (the firmware is still old, not yet replaced) and to revive them have external charger. With them it is not included, as not to keep on the power unit. With batteries included. And I thought.. well the new firmware protection, but there is still self-discharge... if you don't use, then perhaps a charge and will not (will not turn on as I have now). And I brought in this state they are very simple - forget is enabled.
-
- Разработчик
- Posts:321
- Joined:Tue Jul 12, 2011 18:07
- Been thanked: 17 times
Yes, there is such idea. When a device is switched on and off timer indicator are periodically (every 5 minutes podmigivat led and cheep). To remind the user of the device. I have this happening, I sessions under "sleep" almost in a few minutes I fall asleep very hard and the unit remains switched on.After the session, of course, the current consumption in anticipation of the very small.
As for self-discharge, the scheme of on-off switch consumes microamperes. And it all depends on the parameters of the battery.
When fully discharged battery it is not necessary to reanimate them in an external charger. The device will not turn on, of course, because current limiting works on discharged batteries. Just plug the adapter and leave for 10-15 minutes.
now if the device is to forget and the charge will go to the end, it is the user about this recall.
As for the sleep timer with the passivity of the user. The user can start a long session and during the performance not to touch the device and then go to sleep. And how to determine - forgot or not ? If a long time nothing is playing and does not start and the instrument is in one of the menus - so most likely he forgot to turn off. Here you can make auto. Although I would have preferred transfer mode ultra-low consumption and continues to poll the keyboard. Something clicked (even on the next day) was included. It would be more convenient.
As for self-discharge, the scheme of on-off switch consumes microamperes. And it all depends on the parameters of the battery.
When fully discharged battery it is not necessary to reanimate them in an external charger. The device will not turn on, of course, because current limiting works on discharged batteries. Just plug the adapter and leave for 10-15 minutes.
now if the device is to forget and the charge will go to the end, it is the user about this recall.
As for the sleep timer with the passivity of the user. The user can start a long session and during the performance not to touch the device and then go to sleep. And how to determine - forgot or not ? If a long time nothing is playing and does not start and the instrument is in one of the menus - so most likely he forgot to turn off. Here you can make auto. Although I would have preferred transfer mode ultra-low consumption and continues to poll the keyboard. Something clicked (even on the next day) was included. It would be more convenient.
- Маг.нет
- Posts:3310
- Joined:Fri Apr 16, 2010 12:48
- Location:Сибирь
- Has thanked: 24 times
- Been thanked: 142 times
In principle something similar and was meant. Of course when a problem, why turn it off? And if no keyboard is silent, the "sleep mode" (economical power consumption) it will not hurt and will be even better as the full disconnection.Алексей Крячко__ wrote:as for the sleep timer with the passivity of the user. The user can start a long session and during the performance not to touch the device and then go to sleep. And how to determine - forgot or not ? If a long time nothing is playing and does not start and the instrument is in one of the menus - so most likely he forgot to turn off. Here you can make auto. Although I would have preferred transfer mode ultra-low consumption and continues to poll the keyboard. Something clicked (even on the next day) was included. It would be more convenient.
Here's more on p. 5 would be something to include for compiling a playlist before starting the playback, so that it could accommodate labels of different tracks and sessions, with the option of limiting the "long" tracks an interval of time (such as track And 10 minutes, with a 45 minute track), i.e. part of the track from the beginning or interval (e.g., 10 to 20 minutes), I think it would be useful sometimes with some tracks, providing a useful opportunity for partial reproduction (I mean composed of hard disks).
Sincerely, MAG.no