Traces of energy on the basis of passive cakes

[maverik]

I appreciate Your inquisitive mind. Glad to share the experience.
To create a standing device , which will not harm, You or relatives, keep some simple rules:
1.The coil should only be right-coiling, and harness should be right-coiling.
2.Pick your quartz crystal from several. Take up alternately crystal for the crystal, You will feel warmth - Your. Choosing a crystal free yourself from emotions, nawaicoba thoughts, worries of the day. Don't get carried away with size, is usually to realize the potential of a large crystal is difficult and costly. Before winding and casting, preferably crystal clean.
3.In the top layer of orgonite (when casting) is highly desirable the addition of chopped herbs.
4.The first layer of orgonite in place of the main work coil brush at times. in the composition it is possible and desirable to use bronze and aluminium powder. The density of subsequent layers decreases as the distance from the crystal, respectively particles metalla and napolniteley increase. Decide the location for the plugs (use the "Tulip", with a miniature phone more problematic).
5.When working desirable experience strong emotions, in the absence of desire it is better to postpone for tomorrow the day after tomorrow. Mentally connect with crystal (I sometimes talk to him). This relationship will later assist you in working with the device.
6. When pouring, place the product in a circuit, its coil give White noise. The contour is made from a piece of grey tube (kanaski, ventilazione), the Coil is wound turn to turn tight as HV generators, Tesla.
7.The finished product is preferably covered with a layer of a layer of mica (powder) in acrylic lacquer. This facilitates the flow of a very valuable kind of solar energy. Verify the device integrity of the coil should stay within the 8-12th.
Do not rush to power the coil of a product, Even a couple of days to spend in passive mode kind of "fruit cake". Good luck.

[STALKER]

Appreciate Your inquisitive mind. Glad to share the experience.
To create a standing device , which will not harm, You or relatives, keep some simple rules:
1.The coil should only be right-coiling, and harness should be right-coiling.
2.Pick your quartz crystal from several. Take up alternately crystal for the crystal, You will feel warmth - Your. Choosing a crystal free yourself from emotions, nawaicoba thoughts, worries of the day. Don't get carried away with size, is usually to realize the potential of a large crystal is difficult and costly. Before winding and casting, preferably crystal clean.
3.In the top layer of orgonite (when casting) is highly desirable the addition of chopped herbs.
4.The first layer of orgonite in place of the main work coil brush at times. in the composition it is possible and desirable to use bronze and aluminium powder. The density of subsequent layers decreases as the distance from the crystal, respectively particles metalla and napolniteley increase. Decide the location for the plugs (use the "Tulip", with a miniature phone more problematic).
5.When working desirable experience strong emotions, in the absence of desire it is better to postpone for tomorrow the day after tomorrow. Mentally connect with crystal (I sometimes talk to him). This relationship will later assist you in working with the device.
6. When pouring, place the product in a circuit, its coil give White noise. The contour is made from a piece of grey tube (kanaski, ventilazione), the Coil is wound turn to turn tight as HV generators, Tesla.
7.The finished product is preferably covered with a layer of a layer of mica (powder) in acrylic lacquer. This facilitates the flow of a very valuable kind of solar energy. Verify the device integrity of the coil should stay within the 8-12th.
Do not rush to power the coil of a product, Even a couple of days to spend in passive mode kind of "fruit cake". Good luck.

Thank you <

[Димонъ]

"When casting, place the product in a circuit, its coil give White noise. The contour is made from a piece of grey tube (kanaski, ventilazione), the Coil is wound turn to turn tight as HV generators, Tesla.
"

It's just a pipe(top-bottom open) wound with a wire bottom to top(direction as the screw standing on the bonnet) open? Or did not understand? Thank you.

[Димонъ]

And again.
"The finished product is preferably covered with a layer of a layer of mica (powder) in acrylic lacquer."
Suitable mica for microwave ground? Or should native?
Thank you.

[maverik]

Suitable mica for microwave ground? Or should native?
Thank you.

The synthetic mica is not suitable any. I personally, at the end of the reserves and extraction of soldering irons, irons, etc. switched to the fine fraction for the compositions of Kirikov (the notion of the Thrifty Japanese to reduce the cost of metallic, for sale in special. stores"AVTOKRASKA"). Many sellers have no idea what they sell, because watching the car manufacturers.

[maverik]

It's just a pipe(top-bottom open) wound with a wire bottom to top(direction as the screw standing on the bonnet) open? Or did not understand? Thank you.

"Pipe" is a synthetic, composite crystal, as described in the thread: Orgone generator with their hands SP.
Coil "Shuttle" is not suitable for high-end products , give preference to the Torah.

[maverik]

"When pouring, place the product in a circuit, its coil give White noise. The contour is made from a piece of grey tube (kanaski, ventilazione), the Coil is wound turn to turn tight as HV generators, Tesla.
"

It's just a pipe(top-bottom open) wound with a wire bottom to top(direction as the screw standing on the bonnet) open? Or did not understand? Thank you.

It's just a pipe with a coil(s) in order to influence organit during polymerization.

[maverik]

TUBE, which is form fill PRODUCT.

[Димонъ]

Thank you.