Orgone generator with their hands (The Succor Punch, SP)

Communication for those wishing to do something with their hands.
Виктор Тейваз
Posts:2
Joined:Mon Oct 31, 2016 14:33
Re: Orgone generator with their hands (The Succor Punch, SP)

Post by Виктор Тейваз » Mon Oct 31, 2016 17:30

Good time of day! Dear friends, please give step by step instructions on how to make SP. I would be very grateful!


User avatar
Александр Н.
Posts:93
Joined:Sat Oct 08, 2016 21:48
Location:г.Ярославль
Has thanked: 30 times
Been thanked: 50 times

Re: Orgone generator with their hands (The Succor Punch, SP)

Post by Александр Н. » Wed Nov 09, 2016 19:00

The enameled wire of 0.1. I wound the coil on the mandrel, the resistance of 39 Ohms. I filled the cake with epoxy, also 39 Ohms. The cake is not boiled, only heated up slightly. After drying of 25 Ohms. Who can tell, is that a problem? Will not work? Is there a solution to this problem? Or is it easier to leave a passive this cake and make another?

User avatar
Логик
Posts:2073
Joined:Sat Feb 21, 2009 10:43
Location:Россия
Has thanked: 2 times
Been thanked: 21 times

Re: Orgone generator with their hands (The Succor Punch, SP)

Post by Логик » Wed Nov 09, 2016 19:07

Alexander N. there is no problem. 25 Ohms - enough

User avatar
Александр Н.
Posts:93
Joined:Sat Oct 08, 2016 21:48
Location:г.Ярославль
Has thanked: 30 times
Been thanked: 50 times

Re: Orgone generator with their hands (The Succor Punch, SP)

Post by Александр Н. » Wed Nov 09, 2016 19:12

Логик wrote:Alexander N. there is no problem. 25 Ohms - enough
Thanks for the reply.
Of 39 was 25. Perhaps it means that somewhere there was a shorted winding, disrupted the integrity of the coil. This is not a problem?

User avatar
Шалтай Балтай
Разработчик
Posts:3392
Joined:Tue Sep 01, 2009 12:22
Location:Москва
Has thanked: 125 times
Been thanked: 263 times
Contact:

Re: Orgone generator with their hands (The Succor Punch, SP)

Post by Шалтай Балтай » Wed Nov 09, 2016 19:30

Good day, Alexander N.
Александр Н. wrote:Of 39 was 25
it's weird
Александр Н. wrote:Perhaps it means that somewhere there was a shorted winding, disrupted the integrity of the coil
possible
Александр Н. wrote:The enameled wire of 0.1
thin
Александр Н. wrote:This is not a problem?
um... this is a problem, of course. The question is how this serious problem. The answer can only give flight tests :? As 25 Ohms you still there, I'd recommend to work.

User avatar
Александр Н.
Posts:93
Joined:Sat Oct 08, 2016 21:48
Location:г.Ярославль
Has thanked: 30 times
Been thanked: 50 times

Re: Orgone generator with their hands (The Succor Punch, SP)

Post by Александр Н. » Wed Nov 09, 2016 19:37

Humpty BaltayI understood, thank you.
The wire is fine, just be close at hand. I thought for a small crystal(5-6 cm) is normal. And what is the optimum thickness and length of wires? So, get comfortable and work as it should?

User avatar
Шалтай Балтай
Разработчик
Posts:3392
Joined:Tue Sep 01, 2009 12:22
Location:Москва
Has thanked: 125 times
Been thanked: 263 times
Contact:

Re: Orgone generator with their hands (The Succor Punch, SP)

Post by Шалтай Балтай » Wed Nov 09, 2016 19:43

Александр Н. wrote:And what is the optimum thickness and length of wires?
I take it 10 meters under F1 or F1.5 In impedance it will give a 25 Ohm somewhere, Besh will need another resistor Ohm 50 under the player. Or Ohm 10-15 if welcom.

User avatar
Александр Н.
Posts:93
Joined:Sat Oct 08, 2016 21:48
Location:г.Ярославль
Has thanked: 30 times
Been thanked: 50 times

Re: Orgone generator with their hands (The Succor Punch, SP)

Post by Александр Н. » Wed Nov 09, 2016 20:01

Шалтай Балтай wrote:
I take it 10 meters under F1 or F1.5 In impedance it will give a 25 Ohm somewhere, Besh will need another resistor Ohm 50 under the player. Or Ohm 10-15 if welcom.
The table value for a 1m copper wire diameter 1mm - 0,023 Ohm. Is 10m the impedance it will give a 25 Ohm somewhere? And cheap Chinese tester it will show?

10m in half and twist the braid under 45 gr.? Ie for winding coils will be slightly less than 5 meters pigtails?

Wire enamels or in plastic?

Каспиан
Posts:6
Joined:Sat Nov 26, 2016 14:47
Location:Екатеринбург
Has thanked: 4 times
Been thanked: 1 time

Re: Orgone generator with their hands (The Succor Punch, SP)

Post by Каспиан » Sun Nov 27, 2016 18:09

Hello! Have decided to build such a device, but I doubt in the choice of stones.
Is it worth buying from the Chinese, for example?
https://ru.aliexpress.com/item/70-80mm- ... 269.PzhCjo

https://ru.aliexpress.com/item/100g-Nat ... =200042146

Or Ali is generally better to bypass the party for such needs?

User avatar
чернокнижник
Posts:117
Joined:Wed Aug 13, 2014 13:40
Has thanked: 14 times
Been thanked: 24 times

Re: Orgone generator with their hands (The Succor Punch, SP)

Post by чернокнижник » Sun Nov 27, 2016 19:02

The second link - looks quite good. Referring first too equal sides, from which it was carved is unclear. Better simple, wonky, but REAL. Quartz is widespread, it makes sense to ccontact with local geologists, we can tell where found. Trailer and to learn from them a lot of additional information about the crystals, about the varieties of quartz, and so on. This subject is vast and interesting))) the network also has good information, don't be lazy, read. Here's some:
http://www.ethanlazzerini.com/crystal-f ... -meanings/

User avatar
Логик
Posts:2073
Joined:Sat Feb 21, 2009 10:43
Location:Россия
Has thanked: 2 times
Been thanked: 21 times

Re: Orgone generator with their hands (The Succor Punch, SP)

Post by Логик » Sun Nov 27, 2016 21:30

Каспиан wrote:Should I buy from the Chinese, for example?
Polished, smooth like a pencil not worth buying, may not even be crystal, and carved from a monolith or even artificial.
Small that weight sold look real.

мэн
Posts:11
Joined:Sun Jun 18, 2017 11:51

Re: Orgone generator with their hands (The Succor Punch, SP)

Post by мэн » Sun Jun 18, 2017 12:00

Good day to all!

Going to do the SP to execute 1 desire (not money).

I read all 190 pages of the forum, but have questions.

1) How many layers of orgonite to do? 3 layers would be enough?

1A) do I understand Correctly that the lower the density, the thicker the layer?

2) whether as a filler for high density orgonite to use copper grease for calipers of the car? There are composed of fine copper and binders. Do I need these components to corrode/to evaporate?

3) So after all do I need to add the product of the spiral type SBB Coil? And if needed, in what layer?

4) I Want to make the first compact obelisk dimensions 150х50 mm, the distribution of layers the easiest way to do the horizontal in the region where the crystal, pour XHD, then the following layers organic with lower density. Get the gradient in one direction - from top to bottom and from left to right - a constant density. So will work or still need to make the gradient in all directions?

6) the Bottom layer want to make shungite dust. Criticize.

7) And most importantly - why people stopped to discuss this topic? Sharply StuH in all forums, there is no happy life with SP users or those for whom this appliance is not helped.


Thank you in advance for your answers.

User avatar
XUPOH
Posts:188
Joined:Mon Nov 14, 2011 20:36
Been thanked: 10 times

Re: Orgone generator with their hands (The Succor Punch, SP)

Post by XUPOH » Sun Jun 18, 2017 21:19

manone of the reasons - for fulfillment of wishes easier to make a primitive radionic with one to three resistors. The diagrams and descriptions in the network is more than enough, the cost compared to the SP is negligible.

мэн
Posts:11
Joined:Sun Jun 18, 2017 11:51

Re: Orgone generator with their hands (The Succor Punch, SP)

Post by мэн » Wed Jun 21, 2017 1:32

XUPOH wrote:manone of the reasons - for fulfillment of wishes easier to make a primitive radionic with one to three resistors. The diagrams and descriptions in the network is more than enough, the cost compared to the SP is negligible.

I collected the passive the cake - he works. But in the Assembly process made mistakes - had to destroy it.

I understand Radionics is the same sp only krutilki. That is the meaning of these krutilek not clear to me.
For the price I have is 2.5 Tr with a small crystal. I think krutilki today will cost more :)

User avatar
Ланцелот
Posts:1262
Joined:Fri Dec 17, 2010 0:38
Location:Калуга
Has thanked: 33 times
Been thanked: 11 times

Re: Orgone generator with their hands (The Succor Punch, SP)

Post by Ланцелот » Wed Jun 21, 2017 11:21

мэн wrote:7) And most importantly - why people stopped to discuss this topic? Sharply StuH in all forums, there is no happy life with SP users or those for whom this appliance is not helped.
IMHO. two reasons.
1. Comes the understanding that it is not working exactly as described in the manual.
2. All men are brothers is not a fact. What is done there, works. But it is not always correct when using the those who live here.
On the second point, a lot of information on YouTube from Anatoly Klyosov. Not directly, but he that heareth, let him hear. ;)

мэн
Posts:11
Joined:Sun Jun 18, 2017 11:51

Re: Orgone generator with their hands (The Succor Punch, SP)

Post by мэн » Wed Jun 21, 2017 11:35

Ланцелот wrote:1. Comes the understanding that it is not working exactly as described in the manual.
2. All men are brothers is not a fact. What is done there, works. But it is not always correct when using the those who live here.
And could you explain in your own words these two points?

I understand that 1 point is the person wants to ride a black jeep, sends this desire to the universe, he grabbed on the street thugs in the black jeep driven outside the city to knock the headstock?

And 2 item means that the mentality of the inventor is different from ours, so we have it works at random? Maybe it is because they have better epoxy, and we have poured Glue EPD?

User avatar
XUPOH
Posts:188
Joined:Mon Nov 14, 2011 20:36
Been thanked: 10 times

Re: Orgone generator with their hands (The Succor Punch, SP)

Post by XUPOH » Thu Jun 22, 2017 23:09

мэн wrote: is not working very well, as described in the manual
The product is decorated with crystal, its correct preparation (cleaning and programming), not all succeed, hence a lot of frustration.

мэн
Posts:11
Joined:Sun Jun 18, 2017 11:51

Re: Orgone generator with their hands (The Succor Punch, SP)

Post by мэн » Tue Jun 27, 2017 22:14

I've read WarriorMatrix - where people do not bother. Mobius harassed in any direction, break apart, solder two coils in one. Put the aluminium - and all of it works.

We have neither read - "do not get - kill!"

Where is the truth then?

User avatar
Шалтай Балтай
Разработчик
Posts:3392
Joined:Tue Sep 01, 2009 12:22
Location:Москва
Has thanked: 125 times
Been thanked: 263 times
Contact:

Re: Orgone generator with their hands (The Succor Punch, SP)

Post by Шалтай Балтай » Wed Jun 28, 2017 12:37

мэн wrote:no matter how we read - "do not get - kill!"
in the 101 times I say
do not read Soviet Newspapers
will allow you to give yourself advice:
understand what You want, SP or talk about it
there is a practice, there are conversations.
make a selection
мэн wrote:I've read WarriorMatrix - where people do not bother. Mobius harassed in any direction, break apart, solder two coils in one. Put the aluminium - and all of it works.
everything works
read here, for example: viewtopic.php?t=6151
I have MEbius and with right and with left spin and so and so works.
The only course, if the pigtail legaspina, and the bagel - letopisny
if the pigtail propina, and the bagel - pravopisnye
think why

good luck

User avatar
Шалтай Балтай
Разработчик
Posts:3392
Joined:Tue Sep 01, 2009 12:22
Location:Москва
Has thanked: 125 times
Been thanked: 263 times
Contact:

Re: Orgone generator with their hands (The Succor Punch, SP)

Post by Шалтай Балтай » Wed Jun 28, 2017 12:38

мэн wrote:Where the truth lies then?
the truth is not say, it is mined

what they say is the crowd control.

мэн
Posts:11
Joined:Sun Jun 18, 2017 11:51

Re: Orgone generator with their hands (The Succor Punch, SP)

Post by мэн » Wed Jun 28, 2017 23:54

Шалтай Балтай wrote: The only course, if the pigtail legaspina, and the bagel - letopisny
if the pigtail propina, and the bagel - pravopisnye
think why

good luck
But winding a Mobius strip through the centre out or from the outside to the center has a value or just spin?

User avatar
Шалтай Балтай
Разработчик
Posts:3392
Joined:Tue Sep 01, 2009 12:22
Location:Москва
Has thanked: 125 times
Been thanked: 263 times
Contact:

Re: Orgone generator with their hands (The Succor Punch, SP)

Post by Шалтай Балтай » Thu Jun 29, 2017 9:59

man
think with your head, please.

мэн
Posts:11
Joined:Sun Jun 18, 2017 11:51

Re: Orgone generator with their hands (The Succor Punch, SP)

Post by мэн » Thu Jun 29, 2017 10:04

Шалтай Балтай wrote:man
think with your head, please.
Tell me - can't find the answer.
Logan shakes through the center to the outside, warriormatrix harassed outside to the center.

User avatar
Шалтай Балтай
Разработчик
Posts:3392
Joined:Tue Sep 01, 2009 12:22
Location:Москва
Has thanked: 125 times
Been thanked: 263 times
Contact:

Re: Orgone generator with their hands (The Succor Punch, SP)

Post by Шалтай Балтай » Thu Jun 29, 2017 10:07

in the East there is a saying, why to go, when the donkey is........
Шалтай Балтай wrote:your head, please.

Post Reply