Machine Dr rife

[АлександрРоссия]

Yes, just imagine, such a small bug bites and it hurts !! In fact, optical reflection band (ultraviolet) and frequency of MOR - is quite different ranges. If viruses are visible in the ultraviolet that does not mean that the rate of destruction of microorganisms is also in this range. Frequency MOR are all in the radio. At all frequencies everything has been chewed, read the forum.
And yet - what are you attached to car No. 5, she is too tough, make it simple.
Good luck !!

Clearly that is not the teeth!
And the fact that what is the range visible and MOR are two different things I understand. But to see this bug really would like with your own eyes.
While Frex files from this thread set - a wonderful thing, prior to this could not find anything of such a plan

rife frequency multiplied by 2 ,it's just a higher harmonic. Rife himself admitted that some frequencies in the table are the lower harmonics from the fundamental frequency . look closely at the link. there are graphs that show the frequency of the sound used to produce side frequencies and harmonics. and just in this case we are talking about multi-system effects... in order to hit multiple harmonics...

Now the theory became clear.
Thanks again.

Now think about how and on what device to deduce the resonance frequency of MOR from the computer and transmit into the human body. And not to burn yourself

The topic is important, if one is not affected by this infection that is a happy person. Does anyone know the statistics? 300 000 (291 819 - 2014) deaths annually from cancer (clinically-confirmed - pay attention - the first stage die without detection cancera either a stroke or a heart attack, or failure of some vital organ- but people are not very frightened). 500 000 new cases cases. And the price of the so-called "medication" - 50000 wood for a couple days. Help from "medicine" only in mild cases (but always with a pessimistic forecast). Doctors, some doctors-consultants - at the expense of taxes and at the expense of patients. In Burdenko - the reception Desk on the morning of the storm, one consultant - you there, the second consultant - you there, the third consultant you to the fourth, the fourth the fuck you came to me, I can do nothing I can go back. The American model in the wild - it. Found to take one example. And look at these "doctors-consultants" and you know, they're all doomed, who's three, who in five years will be at the reception from their colleagues. Virus - it is a virus. Well, it's all emotion.

With respect.

PS good Luck to all!<

[ЯркоПапайко]

Hello,
someone was trying to measure the intensity of the fields from the Rife plasma generator? I've heard that fits Trifield meter http://www.trifield.com/content/trifield-meter/
But I don't know which version will be appropriate with range of 1000 V/m or 'original' version is 100 KV/m.
Don't know which values must radiate from the Reef of the machine for optimal effectiveness on the human body. I suppose very low value of the electromagnetic field can not kill the virus and, conversely, high can be harmful to the human body.

P. S. Excuse my grammar, I'm not Russian.

[олегмир]

Now think about how and on what device to deduce the resonance frequency of MOR from the computer and transmit into the human body. And not to burn yourself

The computer cannot issue any MOR frequencies. The maximum that may give the sound card of the computer, it is 22kHz. and MOR frequencies start low with 70кГц and up to 2 MHz. And no treks you will not give them on the comp.... do not waste your time and collect a checked scheme, Sergei! I already took it all... and prexy and gamma and therapy 6 ... all this bullshit Galima not working!!!

Hello,
someone was trying to measure the intensity of the fields from the Rife plasma generator?

there is generally still no one understand what processes occur in the plasma... and therefore what to measure is particularly necessary is also not clear... and these trifield meters next business project sales of the devices most likely...

[ЯркоПапайко]

there is generally still no one understand what processes occur in the plasma... and therefore what to measure is particularly necessary is also not clear... and these trifield meters next business project sales of the devices most likely...

I was wondering to measure the force fields because some manufacturers of Rife plasma generators specify a range of effectiveness. For example, RPZ14 (Czech plasma lamp) guaranteed effect up to 15 meters, Craftgen PCL (plasma ball) is 1.8 meters. Craftgen even on his website shows 3 generated fields.
http://craftgen.eu/eshop/index.php/plasma-generator-a29
Seeing these three fields, I thought to use a's trifield meter, although this is mainly used for geopathic zones.
When I want to build my own plasma generator (for example, Ralpha Hartwella), then I don't know how much power I have to regulate. And also don't know how strong the lamp (I am considering to buy pantranco from Econika) I need.
I just assume that I can measure the field strength on a Pro plasma lamp to a healer and then can adjust the intensity on my product.

[сергей п]

I was wondering to measure the force fields because some manufacturers of Rife plasma generators specify a range of effectiveness. For example, RPZ14 (Czech plasma lamp) guaranteed effect up to 15 meters, Craftgen PCL (plasma ball) is 1.8 meters. Craftgen even on his website shows 3 generated fields.
http://craftgen.eu/eshop/index.php/plasma-generator-a29

Hello !
On this website you is a further development,Zapper, or in their language,the Zapper, only without the use of electrodes, as explicitly written in the beginning

Present to You after the long development of our new device Craftgen PCL (PlasmaCraft). In contrast to the frequency generator Craftgen PC Zapper (CPZ), where the contact signal transmission is required the electrode, u the plasma device Craftgen PCL (plasmaCraft) is excluded, because it is designed for contactless signal transmission.

Can try to repeat this unit, but to Reif, he has nothing. Yet for some reason credited here Nikola Tesla, probably for greater effect. I want to warn you, if you want to effectiveness, as close to livovskoy, you do not need to invent anything, you just need to repeat on his car. Here are his followers first change its structure beyond recognition , and then say that his method does not work !!

How to pick up a power gas-discharge lamp ?
Approximately radiation power can be determined by the current consumption GRL multiplied by the supply voltage. There accuracy big is not necessary. Have a rife power of GRL was 40-50 watts. You can make a lamp with a margin of 80-100 watts, more harm than good. But 200-300 watts is already too much. And the electrodes are internal and hairless. In some GRL to increase current consumption and thus the power, the electrodes used in the tubular or honeycomb. In my opinion, such electrodes do not work as rife, because the form of the discharge column will be a different and therefore the radiation from the lamp will change too.
Good luck !<

[Евгениус]

Hi..read all sorts of articles about rife and his medico. He can collect a lot of things ,ham radio. Want to help your wife she's 37 years old with breast cancer.

Your scheme I saw, but I do not like lamp, many things can repeat on transistors, good current selection of elements vpechatlaet. What I need to do, what not to waste time? You already have practical experience.

Frequency cancer I saw in the table
Bacillus X or BX (Cancer Carcinoma) - - - 1 607,450 Hz.
Or BY Bacillus Y (Cancer, Sarcoma) - - - - 1 529,520 Hz.

I must apply a sine wave with the desired frequency to the lamp? Logically, I should still slightly jiggle frequency +- 10 KHz? To use some ready lamp industrial, or still better to order or make a jar of "pickles"? How much power should be connected to the lamp, as indicated above 100W? The effects of increasing the capacity of the linear to razumno chapel? The distance to the body? The session time? Whether amplitude modulation?

[сергей п]

but I do not like lamp, many things can repeat on transistors, good current selection of elements vpechatlaet. What I need to do, what not to waste time? You already have practical experience

Hello. Repeat the transistors only to the parameters turned out to be some need. On GRL needed high voltage for ignition that to transistors problematic. The frequency is better not to swing - will be effective (frequency is known). Be sure to modulate a sawtooth signal (amplitude modulation). Power to the GRL shall not be less than 50 watts and 100 watts. If you really urgently need, GRL can be done from the banks, only the vacuum need to be continuously maintained in a certain range (1-10 mm. Hg.St.). The exposure time three times a day for 3 minutes for 2-3 months. Distance from GDL to sores 20-30 cm Break in two days needed to cleanse the body of toxins. During treatment it is advisable to drink more water (up to 2 liters per day) to reduce the toxic load on the kidneys. Like everything is, if you have any questions, I will try to answer.

[олегмир]

the Evgenius you're so vain hit the transistors... lose time,will burn a lot of transistors and still come back to the lamps... there is only one lamp... I was scared too when I was packing scheme Sergei.. first time in life faced with the bulbs.. and not something.. it worked.. even a couple of times and shook current as follows just have to be careful. it is not necessary Suva fingers where they don't belong and all will be well. and the lamp can withstand such varying parameters,what transistor did not dream...

in General, these devices need not be engaged when the cock bite,and just like that.. because our medicine can not count and need to prepare for different situations...

and again. by rife himself said that frequency should not deviate from the basic no more than 823Гц . therefore, if the pump, it is only within these limits...

[ЯркоПапайко]

Thank you very much for the answers!

How to pick up a power gas-discharge lamp ?
Approximately radiation power can be determined by the current consumption GRL multiplied by the supply voltage. There accuracy big is not necessary. Have a rife power of GRL was 40-50 watts. You can make a lamp with a margin of 80-100 watts, more harm than good. But 200-300 watts is already too much. And the electrodes are internal and hairless.

http://www.odeconica.narod.ru/RifeBareeng.html
I asked in Econika (Odessa) to TIE 150W bulb and they told me that TIE the ignition voltage starts at 200-300 and can work up to 500 W (500 W in a volume of 800 ml???). Well , I however will use a maximum of 100 watts, as you advised me. But I still do not understand which gas mixtures of light needs to be filled. Econika offers mainly argon or argon with neon. You ne know which option is better? How gas filled, for example 6P45S?

[ЯркоПапайко]

I want to warn you, if you want to effectiveness, as close to livovskoy, you do not need to invent anything, you just need to repeat on his car. Here are his followers first change its structure beyond recognition , and then say that his method does not work !!

I agree that the most reliable would be to repeat the scheme is rife, but it is presumably not sohranilas, as I understand it . A seal similar to the original scheme is more rife than other designs? Until I opened this forum, I found only one detailed instructions on the construction of rife machine - that is, from Ralph G. Hartwell. Also he was on to him, if I'm right. I think a significant difference of the Seal compared to the SPA4 is only modulated carrier with a saw, not meander, like G. Hartwell.
http://www.imgup.cz/image/bjo

[сергей п]

But I still do not understand which gas mixtures of light needs to be filled. Econika offers mainly argon or argon with neon. You ne know which option is better? How gas filled, for example 6P45S?

The gas mixture is unimportant (according to rife). Its composition only affects the rate of sputtering of the metal electrodes and therefore the lifetime of the discharge lamp. My GRL - argon, at a pressure of 12 mm of mercury.St. sizes there in this thread. GRL TIE 150W Aconite in the parameters it seems more suited try. Power on it will only handle no more than 100 watts.
In the tube 6P45S - high vacuum, as the presence of any gas is bad for the bulb work.

until I discovered this forum, I found only one detailed instructions on the construction of rife machine - that is, from Ralph G. Hartwell. Also he was on to him, if I'm right. I think a significant difference of the Seal compared to the SPA4 is only modulated carrier with a saw, not meander, like G. Hartwell.

A larger value in what will be the scheme, in my opinion no. The main thing that the output stage was on the lamp (and not transistors) and the parameters correspond to rapovski, ie the output was a sine wave (the appropriate frequency of PESTILENCE from the table) , amplitude-modulated sawtooth signal (1 kHz, falling edge is steep, the front is gradually decreasing, but not Vice versa), and as the radiator must be discharge lamp (GDL). Here the Evgenius offered to make all the transistors, I doubt that it will work. After all, rife, even the most recent construction was in the tubes in the output stage, even with modern radioelement database. And last preferences of audiophiles to lamp technology, saying that the transistor and vacuum tube equipment are very different. So I'm inclined to lamp technology, the benefit that we have everything.<

[ЯркоПапайко]

In the tube 6P45S - high vacuum, as the presence of any gas is bad for the bulb work.

Question about 6P45S was a mistake on my part. I wrote this already tired and I'm confused of L1 and L2. I thought of course about GRL.

[сергей п]

until I discovered this forum, I found only one detailed instructions on the construction of rife machine - that is, from Ralph G. Hartwell. Also he was on to him, if I'm right

With the designs of Ralph G. Hartwell earlier was not a sign, now looking at his website I can say that its design (SPA4) is like car number 5 rife (work on the harmonics), but I doubt that he has no idea how it works. His website and everything they produce and offer, is designed primarily for making money (as well as a bourgeois, earning on the bones rife) and is unlikely to care about the problem of the recovery of patients. Looking at his smug smile, we can say that his works are flourishing. But that's just my subjective opinion. That is to say specifically, you need to check his machine, and that means losing time and money.

[ЯркоПапайко]

With the designs of Ralph G. Hartwell earlier was not a sign, now looking at his website I can say that its design (SPA4) is like car number 5 rife (work on the harmonics), but I doubt that he has no idea how it works. His website and everything they produce and offer, is designed primarily for making money (as well as a bourgeois, earning on the bones rife) and is unlikely to care about the problem of the recovery of patients. Looking at his smug smile, we can say that his works are flourishing. But that's just my subjective opinion. That is to say specifically, you need to check his machine, and that means losing time and money.

About this design here already wrote Alexpal (on page 3 gave the photo SSQ-2, PA3 and SW Frex16) and he began to build according to Hartwall (p. 13). Unfortunately, he has not written his experience with the effectiveness of the finished tool.

[олегмир]

With the designs of Ralph G. Hartwell earlier was not a sign, now looking at his website I can say that its design (SPA4) is like car number 5 rife (work on the harmonics), but I doubt that he has no idea how it works

Let me disagree with You Sergey. Just because Hartwell understood the principle of operation of the rife machine number 5 it and changed the carrier at 3.1 MHz. as this carrier frequency is the most close to the second harmonic of sarcoma and carcinoma and unlike the original rife machine,where the virus hits the fourth or twelfth harmonic sideband in the car Hartwall lupat as far as I remember the second and fourth harmonics,and they are stronger,as You yourselves know... just need to convert this carrier for all frequencies of modulation. Hartwell and he wrote about it. Trouble is a friend--- I have no where found information that Hartwall has direct successes in the treatment...Probably the influence of the side bands, it is a dead end road and still desire to confuse people on the frequency...

[сергей п]

just because Hartwell understood the principle of operation of the rife machine number 5 it and changed the carrier at 3.1 MHz. as this carrier frequency is the most close to the second harmonic of sarcoma and carcinoma and unlike the original rife machine

Well then probably engineer Phillip Holland from rife was stupid and useless compared to Hartwell, if used carrier 3.3 and 3.8 MHz. instead of 3.1. And probably not able to take harmonic.

[Банди]

There is someone who can assemble the device according to the drawings of English?Drawings will be sent,therefore not free.

[Банди]

,who will be able to assemble the device according to the drawings of English?Drawings will be sent,therefore not free.

I'll pay for Assembly

[АлександрРоссия]

I must apply a sine wave with the desired frequency to the lamp? Logically, I should still slightly jiggle frequency +- 10 KHz? To use some ready lamp industrial, or still better to order or make a jar of "pickles"? How much power should be connected to the lamp, as indicated above 100W? The effects of increasing the capacity of the linear to razumno chapel? The distance to the body? The session time? Whether amplitude modulation?

No one knows anything.
And if you know something is silent...
Generally for this plant, because such a situation... or illegal medical practice or fraud - there is a risk from both articles plus the "small things" for a complete, secure, bankruptcy.
That's how it is.
Check Bolotov, Boris, if he's still alive...unfortunately a different country..other sources of information - but the principle of the prohibition information, and the more the action is the same.
Do rife sessions for 3 minutes every 2 DNF...it seems so, but I could be wrong, maybe the opposite for 2 min. every 3 days.

,who will be able to assemble the device according to the drawings of English?Drawings will be sent,therefore not free.

The author is drawing who?
and how in the city can't find a master at electronics?

and more. by rife himself said that frequency should not deviate from the basic no more than 823Гц . therefore, if the pump, it is only within these limits...

Rife saw, and therefore said what he saw!!!. And we after him, in the 21st century, we do not see those dimensions and most importantly the optical range. Invisible illness for us - that's the trouble.
Although like Moscow students found a way to tint the invisible man in the blue color, i.e. where the cells are already affected, but apparently it's not obvious - but if blue steel is the goal... but the goal for surgery - went on TV transmission with malyshevoy like...long ago it was...two years ago - there's brain surgery went. But TV is one thing, life is another. Us modern medicine offered to die. Now the question and what do I need this medicine?
And rife said that in principle the virus is for everyone, but due to certain factors, it becomes aggressive and begins to kill...these would be factors - but on the opposite!<

[сергей п]

the Evgenius wrote(a):
I must apply a sine wave with the desired frequency to the lamp? Logically, I should still slightly jiggle frequency +- 10 KHz? To use some ready lamp industrial, or still better to order or make a jar of "pickles"? How much power should be connected to the lamp, as indicated above 100W? The effects of increasing the capacity of the linear to razumno chapel? The distance to the body? The session time? Whether amplitude modulation?

Nobody knows anything.
And if you know something is silent...

I kind of already answered this question.
And do not scare yourself. No one who does not go to jail if you do it within the law. The problem is, as it turns out. All people want to cure them, but categorically refuse something to experience. Even a dying patient is afraid to damage their organs, become abnormal and so on, during the test,unprecedented, cars, oblivious to the fact that in a month or two he these organs are no longer needed ( it I about their relatives, and what can we say about strangers ).

,who will be able to assemble the device according to the drawings of English?Drawings will be sent,therefore not free.

Unlikely there will be such. All busy with their tests. Even if for the money, we're not bourgeois, many will not take, and cheap - not very profitable. Already wrote about this, contact any firm.

the Drawings will be sent,therefore not free.

Well, still he should stay !!!

[олегмир]

Well then probably engineer Phillip Holland from rife was stupid and useless compared to Hartwell, if used carrier 3.3 and 3.8 MHz. instead of 3.1. And probably not able to take harmonics

aw no ... not stupid... everything is much easier... Holland stupidly used the same transmitter Kennedy,who worked on the data carrier by the Way... this is not silly or stupid Holland, too, was not brilliant results in the treatment with its side frequencies... unlike modest Livovskoy machines 3 and 4 ... and why do you think you are smarter than the Holland is already no one can not be? he,the great unsurpassed genius? a kind of navel of the earth? the purpose of Hartwall was just cancer , that's why he tried to do at the fundamental frequency hollowed not weakened 12 harmonica, and at least 4.. it is simple and Hartwell himself wrote,not hiding anything,unlike hitromudroy of Holland,the purpose of kotorogo as you know was also a profit...

[сергей п]

Yes, and why do you think you are smarter than the Holland is already no one can not be? he,the great unsurpassed genius? a kind of navel of the earth

Well, after all he invented the first to make the apparatus on the harmonics. Perhaps the engineer was not stupid. That's just the money,fraera ruined,, .

the purpose of Hartwall was just cancer , that's why he tried to do at the fundamental frequency hollowed not weakened 12 harmonica, and at least 4th.. everything is simple and clear

If the purpose of one disease, then much much easier to configure the circuit at a fundamental frequency and peck the main carrier, not harmonics !! And the benefits will be greater. If two frequencies, you can put two capacitors in the circuit and switch and not use KPE. I in which the post was offered to do so when the guys couldn't find KPE and the apparatus had to be done faster.
About the effectiveness of the harmonics, of course they are weaker and a lot more. Even the second count is half of the primary, which is equivalent to the same decrease in output power. I somewhere had a photo of the spectrum, coming out with my GRL, as the time will spread. There can be seen the fundamental frequency and harmonics from a sawtooth waveform at 1 kHz.

[Евгениус]

Thanks for the replies.
I also wonder why the city on the harmonics if you can set up a direct frequency, press the maximum power and to no avail not to warm the air. Amplitude modulation saw is not a problem, though I can't understand why it is in the light of known and stable frequency. Strange slanted electrode, is something reflected and radiated from him....The lamp will make friends in College, still build and run, but the lamp I do not deny, but I do not like, and if necessary put in the output stage lamp.

I will work and hope.

By the way, probably many saw the work of the electronic ballasts on semiconductors for industrial arc lamps work just fine.

PS: I Have Bolotov was alive and well, sells its bitters, books, cocktails.

[олегмир]

I Have somewhere was a photo of a spectrum that goes from my GRL like the time will spread. There can be seen the fundamental frequency and harmonics from a sawtooth waveform at 1 kHz.

Sergey,does it have to have the modulation frequency of 1 kHz? But if less? I've never been able to achieve in the modulator 1 kHz. I got somewhere 870Гц. but everything works and the unit really helps.

Amplitude modulation with a saw is not a problem, though I can't understand why it is in the light of known and stable frequency. Strange slanted electrode, is something reflected and radiated from him.

modulation of the saw blade is binding,since the wave is not just,and strikes. the inclined electrode is also required and be sure to observe the polarity of the battery connection. I don't know exactly, but I think this is due to dynatron effect and those electrons which are not "glued" to the inclined electrode and depart from it in the direction of the patient

[сергей п]

Sergey,and must be frequency modulation of 1 kHz? But if less? I've never been able to achieve in the modulator 1 kHz. I got somewhere 870Гц. but everything works and the unit really helps.

The frequency modulator may be slightly different, it's not so important. Modulation sawtooth signal went from rife since the first transmitters were spark. The spark transmitter because of its design can not give continuous oscillations, and oscillations were damped out, in exactly the same way as in amplitude modulation of a sawtooth signal modern transmitters. RF signal of this form is much more effective than unmodulated signal. Also increases the power of such a pulse.
The inclined electrode is also made for a reason. I will not describe as rife picked the optimal efficiency of your gas discharge lamp, in the Report, it is. The fact is that on all the old photos, rife such electrodes.

Will work and hope.

SEA-frequencies is better to use cancer - 1,604 MHz, sarcoma - 1,530 MHz. because in many ribowsky the documents appear exactly these frequencies. They can one by one enable for three minutes each.
I sincerely wish you and your wife good luck !!