Ring. Interaction. Bee.

[Пчела]

I don't feel akavak.How could this be?

1. You have it in stock again or mental work?

2. In that case, if again mentally. You then mentioned the very serious pain in the Third Eye. Perhaps Your Subconscious is taking care of You and for Your safety, have significantly reduced Your ability. That would not be out of potentially dangerous places. Check. Call a couple of rings as before and make them. If you just won't feel anything, really ability lost. If the rings are felt still all right, then You are all still okay. Then I suggest the following.

3. Aku-Vakov two types. Differ in the orientation of the spins. My twisted to the right, the Humpty left. My photos in this thread, a photo of the product Humpty is in the subject of Ring Rates. Try to work with so and so. Only work need the guiding hole for themselves. Both ends.

I do not mean that the product is working and what is not. And then it is working. Moreover, the effectiveness of the product Humpty we have a great opinion of Maliki.

We hope that You have with the abilities is still fine. And waiting for the results.

[ММ]

It took all the sensitivity to the rings. Nothing. Only a Shoe feel good. Aku VIR never had influence on me.

[Малика]

it took all the sensitivity to the rings. Nothing. Only a Shoe feel good. Aku VIR never had influence on me.

I have lost sensitivity when I'm not feeling well (fatigue, illness, stress, etc.), in those days, the body all the energy is directed at recovery. Sometimes, in those cases when I'm doing something important to me, the energy is also redirected in the direction of the task. The same thing happens with the influence of devices, regardless of manufacturer, energy devices is spent on the recovery of the body or to address some pressing problems.

[ММ]

Feeling great! As a 15-year-old girl. On an ongoing basis. Do a contrast shower, spiral gymnastics, gymnastics of Hermes, all inserts to complete. And all what I want. But the sensitivity is still gone. I will take the real ring.

[Малика]

Feeling great! As a 15-year-old girl. On an ongoing basis. Do a contrast shower, spiral gymnastics, gymnastics of Hermes, all inserts to complete. And all what I want. But the sensitivity is still gone. I will take the real ring.

I am very Happy for You)))

[Пчела]

Started manufacturing of the harmonizer. Have questions. Who thinks about this?



In the picture it is clearly seen that the bead is inside the Ark Vaca, located in the middle, but closer to one end. Why?



Not the greatest photo, but nevertheless we are interested in the detail visible. Beads located exactly in the middle. Why?

Why in the harmonizer beads located in the middle of the rings, and Aku-waku closer to one of the edges.

And why do we need them? Sam slim on the beads gives very little information.


Nikola Tesla used spheres in many of their devices. Slim was unaware of Tesla's research. He added beads to the rings as an experiment. Psychic observation confirms that the beads give more coherence to the field tensor, and amplify its action.

And more!

Who have any ideas?

[Шалтай Балтай]

bead inside Aku Vaca, located in the middle, but closer to one end. Why?

You the Mat, then does the reading, though sometimes, dear Bee
viewtopic.php?f=57&t=6147

Negative energy and darkness,
is converted to positive energy, or light at the “Bloch wall” (Bloch Wall). In a Bloch wall is the point where the ball is attached to the coil.

the ball is located at 1/3 from one end
good luck

[Пчела]

the ball is located at 1/3 from one end
good luck

Actually I have a question. Why in the harmonizer beads located in the middle of the ring, and Aku-waku no?

What is it for? The goal?

[Шалтай Балтай]

want to talk about it?

[Пчела]

want to talk about it?

I want to understand why, and to take this into account when making your harmonizer.

And You, dear Humpty Baltay, Russian language is not quite? Not able to distinguish the question concerning the process of manufacture of the device, from the usual chatter?

[Шалтай Балтай]

I really don't know if You joking, dear Bee, or do all that running
good answer, although it will do nothing

beads located in the middle of the ring

the ring does not have mid-beads located in this way for aesthetic reasons, for the beauty of the Besh
if you look at the personal, small harmonizer, there generally are two beads on each side

about aku-VAK I wrote to already

let us guess, again, I tag all not understand, so stupid Humpty, right?

[Пчела]

let us guess, again, I tag all not understand, so stupid Humpty, right?

Stupid people, by definition, will not be able to organize and accomplish the work You have done!

the ring does not have mid-beads located in this way for aesthetic reasons, for the beauty of the Besh

It may be so. Think, thanks!

[Пчела]

Well, clear answers to your questions I received. Will have to answer them yourself.

My question is: "WHY IN the HARMONIZER SLIM BEADS LOCATED IN the MIDDLE of the RINGS, OR IN the MIDDLE of the PRODUCTS?"

Here is a link to the harmonizer slim, sold on the website.http://www.crystal-life.com/slim-spurli ... armonizers

Here is Humpty's explanation of why beads are located thus. Is for aesthetic reasons.

the ring does not have mid-beads located in this way for aesthetic reasons, for the beauty of the Besh
if you look at the personal, small harmonizer, there generally are two beads on each side

Here is a quote from the description of the personal harmonizer is given on above mentioned website.

In the English language.
The Personal Harmonizer affects an area approximately 5 - 7 feet around and through our bodies. It is our own personal bio-field being strengthened and enhanced by the light force energies. It is the principle of the Light Life Rings and the Acu-Vac Coil in motion. As the Harmonizer energy travels through us, following the meridian channels, it will work its way gently through the body from head to toe - down and up - down and up. A polarity flow picture of body rhythms.

[Пчела]

But it's a machine translation of this above quote.

The personal Harmonizer affects an area approximately 5 - 7 feet around and through our bodies. This is our personal biofield is strengthened and enhanced by the energy of the light force. This is the principle of the Light Life ring and the ACU-Vac Coil in motion. as the energy Harmonizer passes through us, following the Meridian channels, it will work its way gently through the body from head to toe and down and up and down and up. Image polarity the flow of body rhythms.

[Пчела]

This implies that the personal harmonizer has two functions.


1. Directs the energy vertically.

2. Doing this alternately. Up and down.

To set motion of energy flows in the vertical direction of slim uses rings, placing them vertically, as the meridians of the globe.

To get the process variability of the direction of energy flows up and down, slim used the beads by placing them in the middle of the rings.

Beads play the role of relays/breakers/switches for alternately changing the direction of energy flows. About any aesthetic content articles are not talking.

Thus I decided.

In my harmonizer rings are arranged vertically, and in the middle will be located beads.

[ЛИЛИЯ-Р]

Why in the harmonizer beads located in the middle of the rings, and Aku-waku closer to one of the edges. And why do we need them? Sam slim on the beads gives very little information.Nikola Tesla used spheres in many of their devices. Slim was unaware of Tesla's research. He added beads to the rings as an experiment. Psychic observation confirms that the beads give more coherence to the field tensor, and amplify its action.And more!Who have any ideas?

Sash, I could be wrong , but when viewing some kuvakov , harmonizers and other...with beads, a single Bead on the ring -power flow , but not just any amplifier, but if you take any TP, then see the movement of energy. Here bead type Torah there. Two or three beads is another additional gain. Because the power goes to each segment. If its not uniform around the ring, then just what is a segment where a couple of Busen place , it will be increased multiple. Why are the rings of beads in the free movement and not soldered-so there is likely IMHO, put the ring on himself and strengthened the area of the extra ring. My opinion while watching.I could be wrong.))

Negative energy and darkness,is transformed into positive energy, or light at the “Bloch wall” (Bloch Wall). In a Bloch wall is the point where the ball is attached to reel.

You can read more, what kind of coil is it? By the way, very interesting data have the Rings Sliema together with different coils....and other stuff-checked all of what was written there. There is the website chat. But if you give good to lay out here , then give old.

To get the process variability of the direction of energy flows up and down, slim used the beads by placing them in the middle of the rings.

That's why in Central kuvake , not yet understood, but the same principle of the Torah-the flow of energy through the ball with the hole.....strengthen the internal thread on the rod-like spine, and a spiral around Kubaka is energopotok protective. Such practices have Hanania energy vertebral segments first to clean from the bottom up the spine and then two spiral-inside of bell and outside. Think of Kubaka togot)))
Not much to grumble at me))trying to understand itself , it is much different and any "skrestili" what that feeling is hard to describe and even more difficult when at the same time in a single day and a lot of different)))and don't remember what was decided and how . So next time I will record on tape , or something))))Atoms as we know know, proizvesti light)))-to describe-I can't remember.<

[Пчела]

That is why in Central kuvake , not yet understood, but the same principle of the Torah-the flow of energy through the ball with the hole.....strengthen the internal thread on the rod-like spine, and a spiral around Kubaka is energopotok protective.

I noticed that spiral around Aku-Waka. The same way I do.

In my opinion, the beads on the rings are fixed rigidly. Without any pretensions.

Very little information. You have to think. But the tips I brought up. The energy moves through the K-WAC. But Aku-Wack thing with two holes at the ends. And different purpose of these holes. In everyday life we Aku-Wack themselves turn turn. But here everything is hard.

And the hint that the harmonizer operates on the principle of pump/pendulum/swing. Rides the Energy of their own up and down. Where this redirection mechanism flow?

In Aku-Waku? In the rings? So I came to the conclusion that rigidly fixed to the rings of the beads fulfil that role.

Energy is not moving in a circle. And in divergent directions.

Something else stops and makes to move in the opposite direction. Segments movements up and down the idea of equal. And beads right in the middle.

Okay, after a few days it will collect, try, go, poeksperementiruyte and then everything will be clearer.

[ЛИЛИЯ-Р]

And the hint that the harmonizer operates on the principle of pump/pendulum/swing. Rides the Energy of their own up and down. Where this redirection mechanism flow?

so , let's decompose harmonizer This bond rings is preferably 6, for the correctness, the bond on the center-top-bottom. further kowaka-spiral, right? so ring kreplenye create a bowl-area Energodar,rings estesno energy moves in a circle , intersecting with other rings. kuweka spiral with a loop here and there. There is a stream flowing inside via a direct bead and if the gain through it.

Energy is not moving in a circle. And in divergent directions.

Well, in this case with rings and Kawakami all around the gland and creates the fields according to their geometry.

something else stops and makes to move in the opposite direction.

it is in what product???

And another question , might have missed? in germanythere kovaka is , as well all put on "Feng Shui" ))) , but which side to put the kuvak better when health cloud drive or to saturate the air around?
Does anyone have observations.

[Пчела]

Is the bond rings is preferably 6, for the correctness, the bond on the center-top-bottom. further kowaka-spiral, right? so ring kreplenye create a bowl-area Energodar,rings estesno energy moves in a circle , intersecting with other rings. kuweka spiral with a loop here and there. There is a stream flowing inside via a direct bead and if the gain through it.

Have you forgotten what this Energy and where it is cleared. And it is cleared in Aku-waku. Then we can assume so. Energy enters the Ark VAK from below moving up a spiral and then spreads through the spiral rings at the plane of the sphere down, rests on the beads, and then flows into obratnuyu, in the opposite direction on the sphere up, down at Aku-waku continue up the rings of the sphere, rests on the beads and back. While in Aku-waku is cleared.

If this option is not satisfied, find another forcing mechanism to change direction of Energy. It was through Aku-WAC.

[Пчела]

Well, in this case with rings and Kawakami all around the gland and creates the fields according to their geometry.

Inside The Aku-Waka. In one direction and then the other, by turns, alternately.

[Пчела]

it is in what product???

In the harmonizer. Is Aku-WAC. He initially has one long end of the loop going up. Here he's outside. Originates at the bottom and welded the top and bottom opposite each other. Bottom where it starts the beginning of a long straight section.

[ЛИЛИЯ-Р]

have You forgotten what this Energy and where it is cleared. And it is cleared in Aku-waku. Then we can assume so. Energy enters the Ark VAK from below moving up a spiral and then spreads through the spiral rings at the plane of the sphere down, rests on the beads and below the sphere up, down at Aku-waku continue up the rings of the sphere, rests on the beads and back. While in Aku-waku is cleared.If this option is not satisfied, of Naila, a different mechanism is causing a change direction of Energy. It was through Aku-WAC.

Do not forget))) at least we solder the ring , though kuvake. all types of Thor, and Thor draws in and gives out. And it recycles the energy colzani garmoniruet, though kuvak. Besides that the interior is tightened in the ring of kuvak and so on it spreads and is identity correctly and also again aired, but already there all sides .right. Not forgotten, just not quite accurately described or not mentioned. I agree

In the harmonizer. Is Aku-WAC. He initially has one long end of the loop going up. Here he's outside. Originates at the bottom and welded the top and bottom opposite each other. Bottom where it starts the beginning of a long straight section.

Yeah. now understood, as it is not focused on the ends, it is now clear that where and where.))

[Пчела]

Complement harmonizer. For the blank beads. Bronze.

And here are the beads.


For the blank coasters. Bronze. Weight 5.5 kg. Most will turn into chips.

[Пчела]

Ring. 6 pieces. Braids. Wire diameter 4 mm.

[Малика]

What gorgeous beads! Yes, even bronze..Probably it's gonna be a harmonizer! Good Luck To You)))