StopMagic. My Experience of manufacture and use.
Checked the key FOB stop magic. When it first became hot, plus certain effects.
At me, were influenced in different ways(trial effect, useful). All the effects are, ie I feel up to physics. The effects of which I know and understand the hazards - for example specifically went to sites izoterike -go impact from which a headache and some places in the body.
As I realized the impact that I allow stop magic flow, but why are the ones I don't want to resist them? Lacks the power of stop magic?
And those effects which I allow, but which are harmful, and I don't know that the damage will stop magic be blocked or what?
At me, were influenced in different ways(trial effect, useful). All the effects are, ie I feel up to physics. The effects of which I know and understand the hazards - for example specifically went to sites izoterike -go impact from which a headache and some places in the body.
As I realized the impact that I allow stop magic flow, but why are the ones I don't want to resist them? Lacks the power of stop magic?
And those effects which I allow, but which are harmful, and I don't know that the damage will stop magic be blocked or what?
Re: StopMagic. My Experience of manufacture and use.
If You know about the harmful effect of a valid site and went on it voluntarily, then voluntarily opened the channel.
The same thing can be, if You were previously heavily mounted in this egregor (for example) and have a working resonances.
Ie stoppage does not warrant immediate cleaning of all the accumulated tit in a cocoon and consciousness, it's just not technically possible. In fact, the most effective protection from all - state 3.0, but usually people keep it for very long, and not everything in it at all can enter (some of this is happening after a long time of use 3.0 only).
Here's to not finding in 3.0 made stoppage.
Naturally its effects are not absolute.
And power (which is why made several dimensions and power versions, the cube is the most powerful today), and because the impacts are different. For example, the work of the magician is one. Work pumped egregor of some esoteric directions, will be significantly more powerful and thumb it really is completely the brakes will be harder.
But this example is in any case not a pure experiment - interference of consciousness waiting "signal" from a source can be considered that the operator was allowed to impact at least partially.
The same thing can be, if You were previously heavily mounted in this egregor (for example) and have a working resonances.
Ie stoppage does not warrant immediate cleaning of all the accumulated tit in a cocoon and consciousness, it's just not technically possible. In fact, the most effective protection from all - state 3.0, but usually people keep it for very long, and not everything in it at all can enter (some of this is happening after a long time of use 3.0 only).
Here's to not finding in 3.0 made stoppage.
Naturally its effects are not absolute.
And power (which is why made several dimensions and power versions, the cube is the most powerful today), and because the impacts are different. For example, the work of the magician is one. Work pumped egregor of some esoteric directions, will be significantly more powerful and thumb it really is completely the brakes will be harder.
But this example is in any case not a pure experiment - interference of consciousness waiting "signal" from a source can be considered that the operator was allowed to impact at least partially.
Re: StopMagic. My Experience of manufacture and use.
Also very effectively DIRECT to destination using stopmovie and protection through the anchor and the stabilizer.
-
- Posts:6
- Joined:Sun Jan 22, 2012 13:01
Re: StopMagic. My Experience of manufacture and use.
Tried to print the file(courtesy of here) to the copy center on a color laser printer - as the designer I responsibly stated that the color laser printer in two passes nothing printed(because of the heat swims first picture.In b\W the download like no problem, but on large color car this nuance).Shtob not to leave empty-handed - he printed the first layout on thick paper, and the second on film. Do you think if you just put them a sandwich(1st and 2nd matrix) we get that thread working?
P/S/
I wonder whether it applies to this technology, the phenomenon of resonance.For example, when the sandwich of the seven matrices is stronger than ten - thirty?
P/P/S/
crushed toad from what I have seen waste - did the layout thicker (your option has not yet been printed,but the coordinates of the squares in both files - it's identical )
http://depositfiles.com/files/rk89bo7yf
http://depositfiles.com/files/waq719ekp
P/S/
I wonder whether it applies to this technology, the phenomenon of resonance.For example, when the sandwich of the seven matrices is stronger than ten - thirty?
P/P/S/
crushed toad from what I have seen waste - did the layout thicker (your option has not yet been printed,but the coordinates of the squares in both files - it's identical )
http://depositfiles.com/files/rk89bo7yf
http://depositfiles.com/files/waq719ekp
Re: StopMagic. My Experience of manufacture and use.
in a sandwich.
the resonance of Yes. to some extent only.
the resonance of Yes. to some extent only.
-
- Posts:6
- Joined:Sun Jan 22, 2012 13:01
Re: StopMagic. My Experience of manufacture and use.
and what, if not a secret, the resonant frequency?
7 or 14 working here?
7 or 14 working here?
Re: StopMagic. My Experience of manufacture and use.
there are no frequency and no 7 or 14 even close
just the principle of resonance is somewhat close but he does not describe these phenomena accurately.
All significantly smarter and easier.
The build-up of layers will give some effect but then it will hit one of the three limits (your personal, rendering the matter or energy).
just the principle of resonance is somewhat close but he does not describe these phenomena accurately.
All significantly smarter and easier.
The build-up of layers will give some effect but then it will hit one of the three limits (your personal, rendering the matter or energy).
Re: StopMagic. My Experience of manufacture and use.
from this it follows that the buildup of layers you can do with the stock? That is, with the expansion of its "Limits" (a word class) will effect the grow?Михаил_ wrote:the Build-up of layers will give some effect but then it will hit one of the three limits (your personal, rendering the matter or energy).
Re: StopMagic. My Experience of manufacture and use.
yeah, something like that... you can add matrix cure between layers
Re: StopMagic. My Experience of manufacture and use.
improvised anchors and programs, too, have the meaning thus strengthen?Михаил_ wrote:yeah, something like that... you can add matrix cure between layers
Re: StopMagic. My Experience of manufacture and use.
no, in any case
Re: StopMagic. My Experience of manufacture and use.
no need to do it.
-
- Posts:6
- Joined:Sun Jan 22, 2012 13:01
Re: StopMagic. My Experience of manufacture and use.
Well, relative to what the value with the stock going to do?Петрос wrote: from this it follows that the buildup of layers you can do with the stock? That is, with the expansion of its "Limits" (a word class) will effect the grow?
Michael
About supplements matrix panacea - in fact , thank you.
-
- Posts:6
- Joined:Sun Jan 22, 2012 13:01
Re: StopMagic. My Experience of manufacture and use.
I mean at one time to print both matrices? I thought twice, printing is a piece of technology (because such evident immediately, was not considered). Or am I mistaken? As for power, both are different, no ?bofara wrote:Shtob not to leave empty-handed
Re: StopMagic. My Experience of manufacture and use.
I have so work well. Decided to share with the forum.Жора Алмазов wrote:one time to print both matrices
Not sure the second option I have.Жора Алмазов wrote:As for power, both are different, no ?
Re: StopMagic. My Experience of manufacture and use.
I misunderstood something I guess.... stop the magic in the stack, program health in the stack, the vip program is also in the stack, top pair panaceas program to enhance the operation cannot be combined in one casting? or not programme for one such casting to put the stacks? or program for use in conjunction with stabilizers cannot be used in the stack? mandala of the stabilizer in the manufacture of the stabilizer may be put in a pile naturally without the use of panacea to enhance ?
Re: StopMagic. My Experience of manufacture and use.
what works with anchors on the stabilizer should have no panaceas and stacks.
-
- Posts:6
- Joined:Sun Jan 22, 2012 13:01
Re: StopMagic. My Experience of manufacture and use.
Michael, what about the option bofara, what's the difference to print stormagic in two passes or one time combined picture?
Re: StopMagic. My Experience of manufacture and use.
better in two.
one will be weaker.......
one will be weaker.......
-
- Posts:6
- Joined:Sun Jan 22, 2012 13:01
Re: StopMagic. My Experience of manufacture and use.
thank you
and another question (like where that was the answer. I can't remember where and not sure whether) -b print the idea is no worse than the color?
and another question (like where that was the answer. I can't remember where and not sure whether) -b print the idea is no worse than the color?