Stabilizer.

[Михаил_]

It is possible and so. all of course nice to have the extra time during which it is possible to think only about interest and not think about profit. But unfortunately not all and not in all periods of life can afford it. And start to rush. Well, it turns out the exhaust from that crap.

[Борис_]

Yeah, but what if nothing interesting?

[Михаил_]

To change the General line of conduct ie nothing interesting - it is a dead end. If the machine is stopped in tukik, that you need to go to turn around

[Мастер 108]

Question to the experts.

Is it possible in the manufacture of the Stabilizer is essential oil to add aromatic sticks?

[Маг.нет]

In NATO - one of these aroma can pink petals of the nearest. flower shop.(choose the most striking yet natural smell)

need essential oil of the highest quality, not the resin.

I.e., a necessary element - natural essential oil in one form or another. I don't think aromapack used it, then used them to set fire to do not have, and when burning, the smell would have changed.......



Sincerely, MAG.no

[bofara]

please Tell me, what the oil of high-frequency it is better to use? ...

... in the area of NATO try to add HF essential oil like rose, iris, ylang. ...

the people oilthe lumps of clay or mashed, etc. - in its sole discretion (the feelings). Oil even the same manufacturer are sometimes different.
Well suited real incense (where there is little).
I love oil company of iris, but in recent years they were worse than in the beginning.

It is believed that only natural oils should be added. About incense sticks /they're not particularly natural prashadam, I think/ IMHO not necessary. And how will you be digging up some drops on druzu?

[Воффка]

Michael_
Michael, what if Druze for the regulator to make the transfer 2.8 ?

[Воффка]

http://files.mail.ru/5QFLKL
Here's the latest (and I think final) version of my build all the files, Mandal and brief instructions for the manufacture of the stabilizer. Please use In this embodiment, the mandala for the manufacture of the joint on a sheet of A4 paper, making printing easier and faster.

P. S. If you have any suggestions or additions please write.
P. S. S. If both references are not available in a personal email.

[bofara]

Thank You, SW. Voffka!

[Шломо]

it would be great if for homemade stabilizer would be selling laminated coloured printouts of mandalas,treated laser charging system interesting to experiment.

[Маг.нет]

Stabilizer-DIY
In the meantime, you can experiment under the sticker N stick to enclose printouts of mandalas Stabilizer for their programming.



Sincerely, MAG.no

[Шломо]

Stabilizer-DIY
In the meantime, you can experiment under the sticker N stick underlay printing Mandal Stabilizer for their programming.

Light head! Eureka! thank you MAG.not for the advice! and I once again did not read.

[Шломо]

http://exfile.ru/219960
Here's the latest (and I think final) version of my build all the files, Mandal and brief instructions for the manufacture of the stabilizer. Please enjoy :) In this version of the mandala for the manufacture of the joint on a sheet of A4 paper, making printing easier and faster.

P. S. If you have any suggestions or additions please write.

Voffka thank you that you do not forget about the other!

[Владмосква]

Michael_ wrote that the programs and anchors can be used outside the field of the Stabilizer.
Some combinations of programs and anchors can be considered a task.
Question: can such a combination of programs and anchors (which is a task) to put on the stage СК1М? With this arrangement, it will be better or worse than just at the location outside the field of the Stabilizer?

[Михаил_]

no, ск1м not need to combine.

[Владмосква]

Michael_, there are industrial: anchor 1, anchor 2, and program Communication.
Objective: to associate якорь1 and якорь2 with the program the Connection (or rather the objects that are bound to these anchors).
Question: how to efficiently positioning these objects on the field (or outside the field, without a difference)?
1) an ellipsis (anchor 1 to the left - the "Communication" center - anchor 2 on the right lined up, the Link for both anchors to each other not touching, well, in short "OOO")
2) the sandwich And (anchor 1 bottom Connection mid - anchor 2 top)
3) a sandwich B (Linking the bottom - middle anchor 1 - anchor 2 the top) (the impact of the program on objects)
4) In a sandwich (Anchor 1 bottom - anchor 2 mid - Relation top) (objects affect the world using the program)
5) a sandwich B the sandwich In (4 anchors and 2 programs) because the impact of the programs impact on the world will give way 2 different sandwiches nearby (or not nearby, the difference apparently is not).

[Михаил_]

in the most General case, an ellipsis.

[Борис_]

someone put anchors on weather processes?
If Yes, please share your experience.

[Димонъ]

"Stabilizer-DIY
In the meantime, you can experiment under the sticker N stick underlay printing Mandal Stabilizer for their programming."

MAG.no , I realized that after I printed and cut out the mandala, just each stick p-stick. Or it is necessary further to give the mental command? Maybe blunt, but if you do not mind, can the algorithm of actions in more detail? And yet, if the sticker is more of a mandala, it is possible to cut and paste the buderbrod? Thank you.

[Маг.нет]

.
Mandala in the application of this program is the structuring of the zone. The flash drive can further enhance the operability of this program and to add energy resource to implement it. If you apply mandala-Stick for a Stabilizer, then it is better to use them for the entire set of programs (Mandal all zones), structuring the field by pouring, for uniformity of charging of the working field, to reduce the possibility of "distortions". If You stick to N-stick mandala and know why, then the extra mental commands do not necessarily. The size of the mandala and the Stick is not necessarily the same, but if the USB flash Drive must be reduced, it is possible to cut if the size of the Stick does not interfere, it is better to leave as is.


Sincerely, MAG.no

[Димонъ]

MAG.no, thank you.

[Волхв]

Voffka!
Thanks for the build!

[Волхв]

Question to the esteemed participants of the forum. Has anyone tried to make a stabilizer not filling with epoxy or polièfirkoj and gypsum or alabaster?(I mean the stabilizers was cast in the dishes made of stainless steel)
I still use two paper versions. But their impact very effectively. Prepared almost all of the components for making a great stabilizer. But will have to wait until summer while the grey clay to thaw.

[Малыш]

But will have to wait until summer while the grey clay to thaw.

you can use peas, mash nachinaetsya sold in the grocery store, but not every

has Anyone tried to make a stabilizer not filling with epoxy or polièfirkoj and gypsum or alabaster?(I mean the stabilizers was cast in the dishes made of stainless steel)

instead of friends, cobblestone, charged as well as the need to charge Druze instead of oil - rose petals, about the clay I wrote

if something is not written, Michael, please correct

[Михаил_]

The cement people have successfully used for larger versions.... (on my forum have the experience of Constantine).