New product of isn-1 is a modification of the BZ.
and IIM-2 do not undergo additional charging?
Re: a New product of isn-1 is a modification of the BZ.
there are no plans. He has a lot significantly more that similarly increases the power. Area and volume are great. If it to load, then on the one hand it will be more rigid (which is compared to IIM-1 old model hard), and on the other hand will have to increase its value, since the small balls to charge fit 7 pieces at a time, and large...... so what will come is not reasonable. In principle this is possible. We made a couple of IIM-2 2.1 charged, but they were not on sale (was made for a special purpose). Charging prohibit ISB-3, but it is generally a very powerful thing. I'd say dibs 
Re: a New product of isn-1 is a modification of the BZ.
sorry for the stupidity,that I wanted to clarify:does this mean this option(ISB-1 ball) product has all the properties of ISS-1(in cast form),but more weakly expressed +mode at 2.9 additional or he combines these properties?
Re: a New product of isn-1 is a modification of the BZ.
When you are in the office? How much does it cost? what size?Михаил_ wrote:there are no plans. He has a lot significantly more that similarly increases the power. Area and volume are great. If it to load, then on the one hand it will be more rigid (which is compared to IIM-1 old model hard), and on the other hand will have to increase its value, since the small balls to charge fit 7 pieces at a time, and large...... so what will come is not reasonable. In principle this is possible. We made a couple of IIM-2 2.1 charged, but they were not on sale (was made for a special purpose). Charging prohibit ISB-3, but it is generally a very powerful thing. I'd say dibs
Re: a New product of isn-1 is a modification of the BZ.
Why Trilling isn-1?
Re: a New product of isn-1 is a modification of the BZ.
Of isn-1 can crackle because of their work and diversity of filling his compositions. Some it itches. Although in storage (not limited for a long time, some are forgotten somewhere in the warehouse for months) nothing like this happens. But if you want to write it off as purely physical phenomena, we can say this - the cooling compound has an internal voltage reinforced glass, which crackles when it is heated appliance, particularly uneven. But really this physical version is not supported due to the fact that they only crack from the operator.
Re: a New product of isn-1 is a modification of the BZ.
Shlomo, it is about the ISB-3?
We took the first samples from two plates of glass so it formed a cube 160х160х145 think (well, that is not exactly a cube, but closer to it). One large glass flat on the other lies. Weigh - ay how many (up to 10kg each, as I understand it).
But those samples of glass ended. Was ordered new, and as far as I remember, they have to do
250х250х125 (I mean the height will be the result of two sheets of 250 too). ie. the cube of 25 cm in the edge.
We tried to persuade the cast to make, but there are problems with the technology of engraving, 125 - thickness limit. Theoretically it would be possible to engrave the floor of the billet and turn, but the installation is not designed and including by weight (where the drives micromovings, they are seriously a lot to carry).
How much will it cost - is not yet clear. I can say that more than 70 000, but rather when they come to the glass. The fact is that the agreement on price of engraving one such mega-glass was only for sheets 160х160. And the result of this engraving is that the people in manufacturing started to collect for our needs the second copy 3D engraver (they have their own development and very accurate), and the second - as each of these plates the day was done.
Well, it is clear that those that 25на 25 will be larger in volume. approximately 3.5 times. I suspect that the final point in the first half of the cost of production (after engraving is our charging a panacea and is also increased in power and time), can be put only after the glass comes (blank ordered for production in China) and there will othervisual the first set of samples.
Ie when they're with these "blanks" in reality will namagayutsya then we will see that this comes at a cost.
While harvesting has not come yet, will be before the end of Oktyabrya (plus production time).
Power that 165х... easily covers the hard effects of a medium-sized office for a couple of dozen employees and the environment. And so that people who believe in nothing, I notice the effects on physics. In the end, the cube is switched to the mode a panacea is 2.9, not too anomalous dispersed.
Due to the programmability the product is in fact unique. Again belongs to the category that does not require a power supply, where there is nothing to break, etc... i.e. an eternal thing.
In fact it is the top modern technology. Where we do 3D is one of the best installations of its kind in the world. Well, this is the limit of its parameters. A method of creating a three-dimensional structure of high resolution not so much. There are certainly more 3-d prototyping, i.e., the seal parts (workpiece, model, whole product, etc.) on a special 3D printer. Then prints the product in advance made in the amount of not computer. But for our purposes it is not useful. The accuracy is lower there, and the materials are either not durable (plastics) or not interested in the properties (powder metal). And the procedure itself - the road.
So all these Sri s really squeezing (especially the rechargeble versions) maximum of the different modern technology together with our technology of information processing.<
We took the first samples from two plates of glass so it formed a cube 160х160х145 think (well, that is not exactly a cube, but closer to it). One large glass flat on the other lies. Weigh - ay how many (up to 10kg each, as I understand it).
But those samples of glass ended. Was ordered new, and as far as I remember, they have to do
250х250х125 (I mean the height will be the result of two sheets of 250 too). ie. the cube of 25 cm in the edge.
We tried to persuade the cast to make, but there are problems with the technology of engraving, 125 - thickness limit. Theoretically it would be possible to engrave the floor of the billet and turn, but the installation is not designed and including by weight (where the drives micromovings, they are seriously a lot to carry).
How much will it cost - is not yet clear. I can say that more than 70 000, but rather when they come to the glass. The fact is that the agreement on price of engraving one such mega-glass was only for sheets 160х160. And the result of this engraving is that the people in manufacturing started to collect for our needs the second copy 3D engraver (they have their own development and very accurate), and the second - as each of these plates the day was done.
Well, it is clear that those that 25на 25 will be larger in volume. approximately 3.5 times. I suspect that the final point in the first half of the cost of production (after engraving is our charging a panacea and is also increased in power and time), can be put only after the glass comes (blank ordered for production in China) and there will othervisual the first set of samples.
Ie when they're with these "blanks" in reality will namagayutsya
then we will see that this comes at a cost. While harvesting has not come yet, will be before the end of Oktyabrya (plus production time).
Power that 165х... easily covers the hard effects of a medium-sized office for a couple of dozen employees and the environment. And so that people who believe in nothing, I notice the effects on physics. In the end, the cube is switched to the mode a panacea is 2.9, not too anomalous dispersed.
Due to the programmability the product is in fact unique. Again belongs to the category that does not require a power supply, where there is nothing to break, etc... i.e. an eternal thing.
In fact it is the top modern technology. Where we do 3D is one of the best installations of its kind in the world. Well, this is the limit of its parameters. A method of creating a three-dimensional structure of high resolution not so much. There are certainly more 3-d prototyping, i.e., the seal parts (workpiece, model, whole product, etc.) on a special 3D printer. Then prints the product in advance made in the amount of not computer. But for our purposes it is not useful. The accuracy is lower there, and the materials are either not durable (plastics) or not interested in the properties (powder metal). And the procedure itself - the road.
So all these Sri s really squeezing (especially the rechargeble versions) maximum of the different modern technology together with our technology of information processing.<
Re: a New product of isn-1 is a modification of the BZ.
Yes Michael! That is the edifice you've created!
If I understand you correctly,then this product is designed for offices, etc., etc.
well, that is not for private use(well, let's say his presence in the apartment).
In principle, I think the reviews of the first buyer on the forum in the future
helps learn more to understand,so we will wait.
Very interesting.
If I understand you correctly,then this product is designed for offices, etc., etc.
well, that is not for private use(well, let's say his presence in the apartment).
In principle, I think the reviews of the first buyer on the forum in the future
helps learn more to understand,so we will wait.
Very interesting.
Re: a New product of isn-1 is a modification of the BZ.
Ie I wanted to know is there any difference in the level of energy-user.Шломо wrote:sorry for the stupidity,that I wanted to clarify:does this mean this option(ISB-1 ball) product has all the properties of ISS-1(in cast form),but more weakly expressed +mode at 2.9 additional or he combines these properties?
Re: a New product of isn-1 is a modification of the BZ.
we have here on the forum the user first (smaller) version.... and he even promised to write... but generally I hear from him on Skype about the next - "Oh, we have suffered...." in fact, he was forced to translate the instrument into the mode 2.9+ their panacea, the product can be used at home.... well, if you think it's possible.
Re: a New product of isn-1 is a modification of the BZ.
Yes, there ran a very not sickly. The deal which I have been threatening to become one of the most iconic on the Russian Internet. ИСН3 is on the table - extremely comfortable - like "souvenir" and because no "magic exists". Not yet switched from a Panacea 2.9 everything was just in the dressing - acceleration on all projects that are sufficiently hard collisions and increased conflict within the team on the rise - each felt himself a person and a willingness to compromise declined. After switching to 2.9 is good, but the events on all aspects of life (work, health, home, personal, self-development) raced even faster. Periodically feared for own roof .
However, I am very happy - life is really richer and more fun, it had a new meaning and drive!
In General I love this - now I want the same, only bigger:):)
.However, I am very happy - life is really richer and more fun, it had a new meaning and drive!
In General I love this - now I want the same, only bigger
:):)Re: a New product of isn-1 is a modification of the BZ.
Employees pity, a damn maniac it is more powerful to him
it is more powerful to him Re: a New product of isn-1 is a modification of the BZ.
Maybe someone has a version of isn-1(rarity) and isn-1 in the form of balls(diameter 5 cm),please write there what's the difference like?
Re: a New product of isn-1 is a modification of the BZ.
yeah! impressive! you are a lucky straight!Василий wrote:Yes, there ran a very not sickly. The deal which I have been threatening to become one of the most iconic on the Russian Internet. ИСН3 is on the table - extremely comfortable - like "souvenir" and because no "magic exists". Not yet switched from a Panacea 2.9 everything was just in the dressing - acceleration on all projects that are sufficiently hard collisions and increased conflict within the team on the rise - each felt himself a person and a willingness to compromise declined. After switching to 2.9 is good, but the events on all aspects of life (work, health, home, personal, self-development) raced even faster. Periodically feared for own roof
However, I am very happy - life is really richer and more fun, it had a new meaning and drive!
In General I love this - now I want the same, only bigger
will wait for your more interesting reviews!
Re: a New product of isn-1 is a modification of the BZ.
Yeah, it's from the same piece of correspondence in Skype the next day after receiving Vasily ИСН3
"Put on the table...
.... said he does not believe it, but that thing in nature specifically rushing
Then 15 minutes later and asked if her headache. I was reassured that maybe. He said he looks at the screen and can't focus... 
"
"Put on the table...
.... said he does not believe it, but that thing in nature specifically rushing
Then 15 minutes later and asked if her headache. I was reassured that maybe
. He said he looks at the screen and can't focus... "Re: a New product of isn-1 is a modification of the BZ.
The difference certainly is. Glass bowl are a bit stiffer (due to the charging panacea) and it has more of this panayioti manifested.Шломо wrote:Maybe someone has a version of isn-1(rarity) and isn-1 in the form of balls(diameter 5 cm),please write there what's the difference like?
IIM-1 rarity-a soft and fluffy like a kitten. From it energy maybe a few less, but kachestenno - pleasant. Ie that allows you to relax and unwind.
Glass rather from the field "to fight"
but all this is of course conditional. In General, and that and that can be configured in similar modes.Re: a New product of isn-1 is a modification of the BZ.
you might not be able to suggest how to configure the mode in ISS-1(Orb),i.e., implied mental control? I mean,if I did not practice with the BZ version 2.7 and 2.8,that I can't get the mental switch isn-1,since it is necessary to know exactly the feeling from BJ 2.7 and 2.8? and offline as what works isn-1? I ask all this as I plan to buy BJ a Panacea or still need a stepped approach BJ 2.6-2.7-2.8?Михаил_ wrote:the Difference is undoubtedly there. Glass bowl are a bit stiffer (due to the charging panacea) and it has more of this panayioti manifested.
IIM-1 rarity-a soft and fluffy like a kitten. From it energy maybe a few less, but kachestenno - pleasant. Ie that allows you to relax and unwind.
Glass rather from the field "to fight"
Re: a New product of isn-1 is a modification of the BZ.
No, you can just a cure.
It's up. The aliasing here is not required. I know people who started immediately with the 3.0 and are quite happy with, although this is a somewhat different product. Well, just and people are not the most common.
The ball is programmable. Specify what you want and send him as a team. Can you imagine though the control panel or anything else, it was convenient to do so. In the presence of at can install on your phone to record.
Offline ball running simultaneously in 2.9 mode (more precisely in the mode ISB) and in the mode of a panacea - a little.
However, it is possible to popereklyuchat 2.9 published on the forum of the switching matrix.
It's up. The aliasing here is not required. I know people who started immediately with the 3.0 and are quite happy with, although this is a somewhat different product. Well, just and people are not the most common.
The ball is programmable. Specify what you want and send him as a team. Can you imagine though the control panel or anything else, it was convenient to do so. In the presence of at can install on your phone to record.
Offline ball running simultaneously in 2.9 mode (more precisely in the mode ISB) and in the mode of a panacea - a little.
However, it is possible to popereklyuchat 2.9 published on the forum of the switching matrix.
Re: a New product of isn-1 is a modification of the BZ.
Thanks Michael!
Re: a New product of isn-1 is a modification of the BZ.
Like this? Missed something seen.Михаил_ wrote:in the presence of at can install on your phone to record.
Re: a New product of isn-1 is a modification of the BZ.
Yeah, missed. Carefully read the instructions and discussion.
In the most intuitively understandable way to create configurations of devices in a structure of folders and files in phone memory, in the form of a tree list in a single file.
In the most intuitively understandable way to create configurations of devices in a structure of folders and files in phone memory, in the form of a tree list in a single file.
Re: a New product of isn-1 is a modification of the BZ.
Michael, thank you for IIM-2, work really began two months later, probably still after I began to communicate with him as with a living creature, his assistant, to thank, to ask for help but now every morning (I have it at work), I first talk to him, talking really softly, take it in hand, pressed to the heart, in General, today received СК1М with the prefix, it will be at my house, we'll see. Already gave it a name.
Re: a New product of isn-1 is a modification of the BZ.
Well, work isn-2 never stops from the moment of production. But apparently talking about the active and visible impact on your personal processes. Format - a valid form, the more that there is TO....
But in General, it rather suggests that somebody it's easier to build the interface himself.
But in General, it rather suggests that somebody it's easier to build the interface himself.
Re: a New product of isn-1 is a modification of the BZ.
Finally got blanks for ISB-3!
Soon the first couple of those will be in the office on sale.
The final size of the product obtained 200х200х200 mm two layers 10 cm thick.
In principle we can on the same workpiece to make extremely powerful stoppage (as long as they are clean).
Soon the first couple of those will be in the office on sale.
The final size of the product obtained 200х200х200 mm two layers 10 cm thick.
In principle we can on the same workpiece to make extremely powerful stoppage (as long as they are clean).