try Pandora connect to this.I2
Re: I2
Three news two of them are exactly good, one neutral (because hope will not be affected)
1. The final firmware of the device in my hands, the last feature which was a long delay modified - adjusting for place of work I2 is implemented in hardware and in code.
2. moderate (relatively neutral) news is that while the programmer because of "unrest" really connected with economic processes in the region (the excitement of the essence of the paid up this process this is not RF), light is not present already 2 days that impede communication ... slightly ....
3. and the third is that because of the forced delays, I personally received another positive effect negative gross violation of how to use, still be received only on the same Japanese gastrono methods 2-3 fold excess of the recommended "dosage", looks at the symptoms such as "muscle soreness" and she almost is, although the physical load was almost zero and is associated with the device. Prior to that, one a friend got this effect here in med gastronomskom-chair (at 30kV 2 hours instead of the maximum 45 minutes). I not only checked out what the reason is I2 (I degrelle to enhance the effect), but also understand what is involved in the process and also check that it is shown only to overdose on the specific emitter. ( I have worked day and night near the site of the sleep and work ). Now it will be included in the user manual what is good though and gave me some pretty unpleasant days, the body is cleaned at these places, but the post process is not very pleasant and it is easier to avoid than to for yourself. By the way the most effective treatment was this:
http://bodymachine.ru/us-medica/vibroplate.htm and with the violation of the recommendations in a slightly larger dose (max 2 sessions of stimulation in a row, 2 times a day). However, I recommend Not to bring and not to repeat my experiments.
Monday I start the final Assembly of the devices, please notify the forum when you receive the first batch of dealers, and will hold an additional webinar.
PS the wait associated with the revision of the code was clearly worth it, because not immediately but soon after the release of the actual devices, this function can be done a bunch of "Goodies"
two of them are exactly good, one neutral (because hope will not be affected)1. The final firmware of the device in my hands, the last feature which was a long delay modified - adjusting for place of work I2 is implemented in hardware and in code.
2. moderate (relatively neutral) news is that while the programmer because of "unrest" really connected with economic processes in the region (the excitement of the essence of the paid up this process this is not RF), light is not present already 2 days
that impede communication ... slightly .... 3. and the third is that because of the forced delays, I personally received another positive effect negative gross violation of how to use, still be received only on the same Japanese gastrono methods 2-3 fold excess of the recommended "dosage", looks at the symptoms such as "muscle soreness" and she almost is, although the physical load was almost zero and is associated with the device. Prior to that, one a friend got this effect here in med gastronomskom-chair (at 30kV 2 hours instead of the maximum 45 minutes). I not only checked out what the reason is I2 (I degrelle to enhance the effect), but also understand what is involved in the process and also check that it is shown only to overdose on the specific emitter. ( I have worked day and night near the site of the sleep and work ). Now it will be included in the user manual
what is good though and gave me some pretty unpleasant days, the body is cleaned at these places, but the post process is not very pleasant and it is easier to avoid than to for yourself. By the way the most effective treatment was this:http://bodymachine.ru/us-medica/vibroplate.htm and with the violation of the recommendations in a slightly larger dose (max 2 sessions of stimulation in a row, 2 times a day). However, I recommend Not to bring and not to repeat my experiments.
Monday I start the final Assembly of the devices, please notify the forum when you receive the first batch of dealers, and will hold an additional webinar.
PS the wait associated with the revision of the code was clearly worth it, because not immediately but soon after the release of the actual devices, this function can be done a bunch of "Goodies"
Re: I2
The funny thing is, published in ACC. with PP3 muscle blocks over the same emitter do not, provoked the effect is not repeatable, seems to have removed the debris and now everything is OK. Very likely it was a separate part of the internal voltages from loss of part of the apathy for a short time recently well, fortunately I'm long this crap will not suffer. T/e is relatively fresh and not yet introduced uranotaenia (also I was told on prof massage, I was more stressed than usual). People caught in a similar situation on helstone, he shot at it ( according to him he feet hands had to rearrange not counting the pain) the needle from the Chinese, I mean present them with reflexology, because it was not in Russia and there are inhabited and accessible. It took him 10 sessions, I had 3-4 days like...
I'm not a masochist, was just curious to see if the 2nd time will be after removed - I was not, well, at least in vivid form no.
well, fortunately I'm long this crap will not suffer. T/e is relatively fresh and not yet introduced uranotaenia (also I was told on prof massage, I was more stressed than usual). People caught in a similar situation on helstone, he shot at it ( according to him he feet hands had to rearrange not counting the pain) the needle from the Chinese, I mean present them with reflexology, because it was not in Russia and there are inhabited and accessible. It took him 10 sessions, I had 3-4 days like...I'm not a masochist, was just curious to see if the 2nd time will be after removed - I was not, well, at least in vivid form no.
Re: I2
The only way to know the limits is to go beyond these boundaries.Михаил_ wrote: I not only checked out what the reason is I2 (I degrelle to enhance the effect), but also understand what is involved in the process and also check that it is shown only to overdose on the specific emitter. ( I have worked day and night near the site of the sleep and work ). Now it will be included in the user manual
http://bodymachine.ru/us-medica/vibroplate.htm and with the violation of the recommendations in a slightly larger dose (max 2 sessions of stimulation in a row, 2 times a day). However, I recommend Not to bring and not to repeat my experiments.
And what was the usefulness vibrostatic? Is that some kind of fibrogenetic Mikulin? output any dirt from the intercellular space, etc.
Re: I2
Well I use a vibration platform for a long time and it is useful by itself, activates blood circulation, rastrasant blocks how the shakes in different health systems. In this case it was actually shot block cramp for a few hours to remove the feeling of delayed onset muscle soreness, other methods were not effective or worked a very short time. I then in the middle of the story I remembered a similar story on the chairs - out of my head, it was a few months ago. I personally have the blocks so bright not washed out on the muscular level, although I heard about this from relatives. Was impressed a few days thinking only about the legs and when checked it from the radiator, then another, and on the back Thought about the fact that it is time for the rule to be like a friend has his on the site.
and when checked it from the radiator, then another, and on the back Thought about the fact that it is time for the rule to be like a friend has his on the site.Re: I2
The first batch should be ready by the end of this week (Friday/Saturday time of delivery) or, the most horrible and bad - Monday.Строитель wrote:Michael, Hello!
Have an understanding of when And-2 goes for predoplatu in the office of MM?
Thank you!
I drive going at least a day or two in the "stress test" and it will take some time (and the removal of the instrument from me, otherwise it will be a stress test not the instrument but me, and so I regularly give myself ... by the way about it a little further I will write more news ).
The first batch will go, and wrote Sabang, according to the date of application, but yeah, she mostly leaves in MM.
The resistance of the medium (Thursdays and Fridays ) remains strong and funny. For example, from the realm of anecdote, in the MSC ended, I need adequate connectors. Well, usually such things are always available on the first 50% of the circulation I2 I purchased, expecting the new batch to one of the suppliers. Not wait. Retail is 450 R thing !!!!! in one famous store is outland in the slot on the housing .... well, I've ordered from wholesalers, it's China, though gilded and quality, with prompt delivery will arrive sooner than needed. But it's just funny, if not "resist" nor what is mine razumchik 500r as fun
Now requested all dealers date of priority. Will reduce the queue and it will try to let go.
Made virtually all Linux machines, some of the laborious work of final Assembly was not as quick as I expected (I'll long remember how dashing himself has uploaded project 2, but I am glad that I am aware of its usefulness for all of us).
Work.... the process goes on.....
Yes, that's checked by date, a LARGE part of the first batch of fall in MM (not all).
Re: I2
Accordingly, the place I close on Thursday.
Yeah, what I wanted to write, continued to experiment with E-emitter, shown in the last webinar, which was "pseudocreators" - I cleaned it well, the places this effect is not affected, but there are (very few) others. I him again for the night left ....out of curiosity, to the state of the body. Feeling the power after the passage of the past history of other (I have it so easy)...
Yeah, what I wanted to write, continued to experiment with E-emitter, shown in the last webinar, which was "pseudocreators" - I cleaned it well, the places this effect is not affected, but there are (very few) others. I him again for the night left ....out of curiosity, to the state of the body. Feeling the power after the passage of the past history of other (I have it so easy)...
Re: I2
I thought I would as I each individual I2 a proper name.... I was led by the idea that to test a few I2 in the same wifi networks are not very comfortable - hard to distinguish. Well, I think that there will be those who will supply the house 2 or 3 and 2 for sure.... (well, in terms of personal devices family members) and start confusion. Numbers to give, but somehow is not a human....
Re: I2
Ladies and gentlemen.
There are several news I2 good and average and not very
1. Good news. The first batch lying on my tests with some silicone to seal the connectors has dried up, I'm like this can't cover to fix, but they are collected. Actually, I thought that they Friday or today will go to multiple dealers who have customers an early of the first list.
2; the Bad news is not going away. Found a few things that need to be corrected. Waiting for the adjustment of the firmware (the mother, the old version worked, new one released a few days ago, when the programmer had to break ? well, or whatever ... drink coffee and swear
In particular broke avtoapdeyt device, I had his hands kicking coming in with administrator privileges on the devices.
3. Bad news. In General, the final Assembly takes much more time on one set than I thought... W/e everything is going really slow... sorry.
4. The good news is that despite PP3 - still going
5. Another piece of good news. This is the FIRST time in the history of the production of various products and devices, when I realize that if I had known how long it will take my time and that I'll still be doing THAT, then I wouldn't have to release I2 or would have done a few pieces for their own.... It is good that all other good - now have nowhere to retreat However, and good for me, not releasing them would be wrong....
And although I'm not always engaged in the devices, total time and lag in others, not associated with known products, processes me is shocking ... okay... so it should be.
6. More good news - I have partially over-outsource the process of assembling the sets I2 and upon confirmation of prof-fitness-collector translated into almost all the stages of production, some of this will speed up the final Assembly and only the first set of devices to stop (by the way this stop on Wednesday and Thursday they managed to get a few people....). Of course I realize the proper quality control of the performed human actions (just a lot of manual work on the wiring, it turned out that, contrary to my view it is much slower because it requires monitoring/checking/attention and care... pinata-soldering work )
Actually solved the question of Assembly of the devices without me, well, with a minimum of my participation. A number of complex processes need to do, all time-consuming things or not on me (such as the proper Assembly/manufacture of radiators, I was initially hung up on colleagues who have more time), now everything else will go smoothly in the "series", if you can call such a boxed edition - series -
7. From paragraph 6 should be really bad news - I spent time the last 2 days in a decent amount in addition to test the first batch of writing instructions with pictures and explanations for the collector. And probably still spend. That will slow down a few batch 2 but will accelerate the overall process of closing the queue. (one I'd messed around a lot longer).
8. more bad news for those waiting for the leasing and good at the same time. I decided that a lease will be the device at the old price (95), but without the gift of the radiator of course (25 - session), not 120 as will the price of the device for new orders. BUT small or big but I will simplify the leasing instrument. Throw out the battery along with it will be unnecessary to couple the inverter and charge controller, and will make the power input is not universal in a wide range of voltages (from the current devices from 5 to 25 volts can be powered through a standard round plug, except the native power supply, including 12V car with cigarette lighter, etc.), and make it exclusively a 5 volt.
The point about this - many have either external PowerBank battery for charging mobile devices, either they are not hard to buy. If you really need the autonomy /mobility.
And the reason is not so much the cost, though it, too, where some components will fall off a lot, how much simplification of the Assembly/installation/debugging. And the functionality when using an external 5 volts - is the same. The danger is only in not sticking 5 volts will be
But leasing is more available. (at a quarter of the actual difference monthly).
On the release of the first batch - waiting for a small update of the software. And chase different modes. At the same time made a small lucatello... management.
PS and I hope that this is the last trick.... although it is accepted that these devices a lot of them....<
There are several news I2 good and average and not very
1. Good news. The first batch lying on my tests with some silicone to seal the connectors has dried up, I'm like this can't cover to fix, but they are collected. Actually, I thought that they Friday or today will go to multiple dealers who have customers an early of the first list.
2; the Bad news is not going away. Found a few things that need to be corrected. Waiting for the adjustment of the firmware (the mother, the old version worked, new one released a few days ago, when the programmer had to break ?
well, or whatever ... drink coffee and swear In particular broke avtoapdeyt device, I had his hands kicking coming in with administrator privileges on the devices.
3. Bad news. In General, the final Assembly takes much more time on one set than I thought... W/e everything is going really slow... sorry.
4. The good news is that despite PP3 - still going
5. Another piece of good news. This is the FIRST time in the history of the production of various products and devices, when I realize that if I had known how long it will take my time and that I'll still be doing THAT, then I wouldn't have to release I2 or would have done a few pieces for their own.... It is good that all other good - now have nowhere to retreat
However, and good for me, not releasing them would be wrong.... And although I'm not always engaged in the devices, total time and lag in others, not associated with known products, processes me is shocking ...
okay... so it should be.6. More good news - I have partially over-outsource the process of assembling the sets I2 and upon confirmation of prof-fitness-collector translated into almost all the stages of production, some of this will speed up the final Assembly and only the first set of devices to stop (by the way this stop on Wednesday and Thursday they managed to get a few people....). Of course I realize the proper quality control of the performed human actions (just a lot of manual work on the wiring, it turned out that, contrary to my view it is much slower because it requires monitoring/checking/attention and care... pinata-soldering work
)Actually solved the question of Assembly of the devices without me, well, with a minimum of my participation. A number of complex processes need to do, all time-consuming things or not on me (such as the proper Assembly/manufacture of radiators, I was initially hung up on colleagues who have more time), now everything else will go smoothly in the "series", if you can call such a boxed edition - series -
7. From paragraph 6 should be really bad news - I spent time the last 2 days in a decent amount in addition to test the first batch of writing instructions with pictures and explanations for the collector. And probably still spend. That will slow down a few batch 2 but will accelerate the overall process of closing the queue. (one I'd messed around a lot longer).
8. more bad news for those waiting for the leasing and good at the same time. I decided that a lease will be the device at the old price (95), but without the gift of the radiator of course (25 - session), not 120 as will the price of the device for new orders. BUT small or big but I will simplify the leasing instrument. Throw out the battery along with it will be unnecessary to couple the inverter and charge controller, and will make the power input is not universal in a wide range of voltages (from the current devices from 5 to 25 volts can be powered through a standard round plug, except the native power supply, including 12V car with cigarette lighter, etc.), and make it exclusively a 5 volt.
The point about this - many have either external PowerBank battery for charging mobile devices, either they are not hard to buy. If you really need the autonomy /mobility.
And the reason is not so much the cost, though it, too, where some components will fall off a lot, how much simplification of the Assembly/installation/debugging. And the functionality when using an external 5 volts - is the same. The danger is only in not sticking 5 volts will be
But leasing is more available. (at a quarter of the actual difference monthly).
On the release of the first batch - waiting for a small update of the software. And chase different modes. At the same time made a small lucatello... management.
PS and I hope that this is the last trick.... although it is accepted that these devices a lot of them....<
Re: I2
In connection with the early shipment of the devices I2, on Tuesday evening at 21:00, will hold a webinar on its use:
1) network connectivity, working with laptop/smartphone
2) push-button menu control via the led/button
3) proper inclusion of emitters
4) modes of operation how to navigate the choices.
I'll be spending only the web part (in person or will not be), not to shoot down with narration The record will be available as part of the user to the device.
This is not the only webinar about working with I2
The link will upload later. Platform for webinars will be this time druga, webinar.ru I'm tired (greedy/harmful use the zoom in the webinar well-established practices in the Seminary).
PS please do not pester their dealers and me with questions "when is my device" I understand that all been waiting for, including myself....
Real circulation increased several times during this time, and I always also busy re-buy components and reload performers assembling radiators and so on. In the nearest weeks we will have fulfilled vecenie orders, orders received in June, maybe a little longer to be processed. In any case, all moves at the maximum physically possible speed. A little later I'll write a little about the occurred changes and other fun I2.
1) network connectivity, working with laptop/smartphone
2) push-button menu control via the led/button
3) proper inclusion of emitters
4) modes of operation how to navigate the choices.
I'll be spending only the web part (in person or will not be), not to shoot down with narration
The record will be available as part of the user to the device. This is not the only webinar about working with I2
The link will upload later. Platform for webinars will be this time druga, webinar.ru I'm tired
(greedy/harmful use the zoom in the webinar well-established practices in the Seminary).PS please do not pester their dealers and me with questions "when is my device"
I understand that all been waiting for, including myself.... Real circulation increased several times during this time, and I always also busy re-buy components and reload performers assembling radiators and so on. In the nearest weeks we will have fulfilled vecenie orders, orders received in June, maybe a little longer to be processed. In any case, all moves at the maximum physically possible speed. A little later I'll write a little about the occurred changes and other fun I2.
Re: I2
How to login to the webinar:
follow the link https://zoom.us/zoomconference?m=fWu...8f98W5FBU55E7m
in the top menu click on Join meeting
In the next number field to enter the webinar
Webinar ID: 535-376-874
(t/e copy only the number).
Next, you will need to enter a nickname and email address (as I understand it, the software checks the validity of email address in order to avoid left people slightly)
Let's start at 21:00
follow the link https://zoom.us/zoomconference?m=fWu...8f98W5FBU55E7m
in the top menu click on Join meeting
In the next number field to enter the webinar
Webinar ID: 535-376-874
(t/e copy only the number).
Next, you will need to enter a nickname and email address (as I understand it, the software checks the validity of email address in order to avoid left people slightly)
Let's start at 21:00
