Forum

Bought a RAD 2000. There are audio input and audio output.
In the video it was said that 2000 is no entry.
Maybe Carl decided to add? Or I that not so understand?

QUESTION: WHAT IS THE AUDIO OUT???

Use RAD2400HD there really is audio (audible files) and the target Trend of the inputs and outputs for a total of 5 mini-Jack sockets, audio output no. Maybe You have something confused?


Sincerely, MAG.no

Маг.нет wrote:Use RAD2400HD there really is audio (audible files) and the target Trend of the inputs and outputs for a total of 5 mini-Jack sockets, audio output no. Maybe You have something confused?


Sincerely, MAG.no

I have a 2000 you have a 2400. This is a different device.

I agree, reasoning by analogy and available information, I have audio in signed: Your and the rest of the nest InputTarget, InputTrend, OutputTarget, OutputTrend.
And what labels You have on the audio output?


Sincerely, MAG.no

I looked closer at the 2000 Input, Output it's input and output for connecting additional "subject tables" and other Radionic-partings for "in circuit", it is not audio.


Sincerely, MAG.no

Clear! Thank you very much!
And what kind of subject tables?

Already added...
To these inputs the outputs can be connected to an additional "stage" (but it sales I have not seen, possible means of their own making) on the similarity of the Target/Trend of the plate or other Radionic devices (or organogelator) to connect to the "common circuit" or additional supply orgonenergie output component 2000.


Sincerely, MAG.no

Thank you!

After watching the video,- "thikpad" on РАД5 began to "work"..Kurcu handle..and at some point, the finger is either stuck on a plate of orgonite or "pierce" is pretty much already beyond the finger( of 30 centimeters feels like), I and the handle stopped spinning....And the more the more feel this "generatorexe"...!!!THAT's going to work "Manifesto" on Mani - decided on ATG 12000 "wipe")))..and that is a solid such "Alternatives")))

Near RAD2400 in the direction of the back area feels a clear sensation of "burning", "burning" near the right scapula and spine, then to the right, more difficult to localize. How can it be interpreted ? While for some distance no such feelings. Perhaps this feeling of the presence of orgone energy? I would be grateful for any response, maybe someone from the forum had a similar experience. Thank you.

ВИТАЛИЙ ГИНЗБУРГ wrote:How can it be interpreted ?

You can interpret in different ways, the reasons why burning in that place sooner or later find themselves.
This and other practices, not radionic.
As for Radionics, then watched as my cat is playing with its "rays" paw right next to the "nipple".

Hello!Thinking about buying happy 2000,but it is not quite clear use.

well, more precisely where to put the binding?under the phone?

well, then it turns out that рад2000 can be used for a limited group of targets. Because it is impossible to adjust the target

The device can be used for any purpose, use, is a creative process, it is not limited to what would be mechanically to perform some actions. Everything can be configured using tactile sensations from the plate or in some other intuitive way.

good day
please tell me how to use the Rad 1000, as there is only one long brown plate instead of two and three controls.
what where to twist and where to put in terms of intention, etc.. in the instructions Welz this model is also not described
I would be very grateful

Brown plate to touch the fingers, twisting the three available controller, leave them in a position where it will appear any tactile effect.
On the same plate to put the intention, if you recorded it in the form of a material object.

the tactile effect-in the sense of when pachytheca the flow of energy from this plate?
just the tactile effect jitteriness in any case, in the touch .

and photo and like hair of the object of exposure where to lay down?

When you touch the plate, you feel a tactile sensation, and when put the right controllers for a specific task, you will feel the effect How it will manifest depends on the person.
Put on plate or near the tube.

Borislava Put on a brown stick pad that you want to donate to.....photo links(hair and other biological material, object , subject, what you want to handle). Configuring the haptic-3 knob for setting the frequency, it is difficult if not sensorlistener response, but intuitively, just before receiving at least tingling, chill, heat. Difficult to configure like ? Then the Manifest is installed on the computer , there is a numbered link to the disk the installer , installing the software, get the opportunity to set the exact frequency on the device. As there are no younger versions of the frequency, this makes it difficult to adjust any frequency to tenths, hundredths not that. Frequency is important, and since there is no audio input , then the program provides the frequency settings in the digital form under Windows, links and audio. Are in the program of the Manifesto, just select the Chapter and from there, audio and all other ancillary settings for your target. The program can read here: https://mindmachine.ru/catalog/shop/manifestation/

thanks for answers))
if the goal is for two people and you have their and this man's photo to put?

near the tube to put it as.? for example a machine on the floor, then lay down a photo on the floor under the tube itself? or where the tip of the tube(where as I understand is the output of the orgone)

Borislava No matter where the device is, it is important that your model tube-energy output and there -in front of the tube to supply what you need to process something, or to give properties something... or file info...myself and someone. But I'm GLAD the 1000 is too weak for multiple targets, unless of course the photo of you two,and the goal set for two, then maybe.
Too weak a device to use it on a few people. The results depend on correctly to the intended target and power the device itself.

Good afternoon.
Please tell me radionic can be put to work in the garage? Or should it be a room with a window where there's sunlight? does it matter?

The device can work anywhere.

and performance of the device-is affected by where it is located? ( I mean that in one place the result is obtained faster than if he got it in another location of the device, under other circumstances, the location of this device)