Help with instructions please
A year ago I bought InnerPulse glasses + ColorTrac and long time not used, and when the itch, I can't find instructions in Russian, not the cord to download the sessions. Please help. And you know this cord to be. I live in Kazakhstan.
Thank you.
Thank you.
-
- Автор сайта
- Posts:10238
- Joined:Tue May 30, 2006 20:17
- Location:Екатеринбург
- Has thanked: 134 times
- Been thanked: 556 times
- Contact:
Re: Help with instructions please
Go up there, where bought, and You will receive.Галан wrote:a Year ago I bought InnerPulse glasses + ColorTrac and long time not used, and when the itch, I can't find instructions in Russian, not the cord to download the sessions. Please help. And you know this cord to be. I live in Kazakhstan.
Thank you.
Re: Help with instructions please
Hello, dear gentlemen!
I was lucky to buy at the flea market Machinko, unfortunately without the instructions... the machine is called "Brain Light Synchro SL". Has 25 built-in programs and a whole slew of manual settings. Glasses have 2 Red LEDs per eye. Everything works - super. But there is one thing ! I don't know what programs do what is intended ! I tried to choose 24 and 25 of the program - relax and take deep sleep and back. Other programs are also waste - the Sound is in sync with the light, as it should be. some programs before the mind's eye doing oblique, horizontal and vertical lines, some fancy patterns.
EXT input also works. Connected meditation CDs - the sound is superimposed on the b. rhythms and light. That is, at first glance you might conclude that I was lucky to buy a working Machinko, though somewhat ancient.This is all very interesting, but I would like to know what to do !
Question :
Is it possible somewhere to find /learn/ how to figure out which of the 25 programs are responsible for what and how to use it all ?
Searched the net for a week. Nothing specific failed to find. Only General information...
http://web.brainlight.de/content/Fotos/ ... um.html#17
http://www.esoterikforum.de/threads/126 ... gt-zustand
http://www.brain-light.de/bl-home/produ ... sl/sl.html
Photographed it and posted photos on Yandex disk (on the forum yet have not found the option to attach files), if anyone is interested
https://yadi.sk/i/H9vzgHiMdM69N
https://yadi.sk/i/Z1VkldEedM69v
https://yadi.sk/i/VLlHceZIdM6A5
Very hope for Your help. Thanks in advance.<
I was lucky to buy at the flea market Machinko, unfortunately without the instructions... the machine is called "Brain Light Synchro SL". Has 25 built-in programs and a whole slew of manual settings. Glasses have 2 Red LEDs per eye. Everything works - super. But there is one thing ! I don't know what programs do what is intended ! I tried to choose 24 and 25 of the program - relax and take deep sleep and back. Other programs are also waste - the Sound is in sync with the light, as it should be. some programs before the mind's eye doing oblique, horizontal and vertical lines, some fancy patterns.
EXT input also works. Connected meditation CDs - the sound is superimposed on the b. rhythms and light. That is, at first glance you might conclude that I was lucky to buy a working Machinko, though somewhat ancient.This is all very interesting, but I would like to know what to do !
Question :
Is it possible somewhere to find /learn/ how to figure out which of the 25 programs are responsible for what and how to use it all ?
Searched the net for a week. Nothing specific failed to find. Only General information...
http://web.brainlight.de/content/Fotos/ ... um.html#17
http://www.esoterikforum.de/threads/126 ... gt-zustand
http://www.brain-light.de/bl-home/produ ... sl/sl.html
Photographed it and posted photos on Yandex disk (on the forum yet have not found the option to attach files), if anyone is interested
https://yadi.sk/i/H9vzgHiMdM69N
https://yadi.sk/i/Z1VkldEedM69v
https://yadi.sk/i/VLlHceZIdM6A5
Very hope for Your help. Thanks in advance.<
-
- Автор сайта
- Posts:10238
- Joined:Tue May 30, 2006 20:17
- Location:Екатеринбург
- Has thanked: 134 times
- Been thanked: 556 times
- Contact:
Re: Help with instructions please
YUKO
And You, too!
This machine, in its time, produced Photosonix on the basis of the Nova Pro, especially for German comrades who have managed there for themselves to push it through medical certification, and therefore fighting with users for it at 400 euros. But what sort of specific programs is probably not find.
Although perhaps if you ask ray (Director and developer Photosonics), you may have it somewhere in the manual lying around...
And You, too!
This machine, in its time, produced Photosonix on the basis of the Nova Pro, especially for German comrades who have managed there for themselves to push it through medical certification, and therefore fighting with users for it at 400 euros. But what sort of specific programs is probably not find.
Although perhaps if you ask ray (Director and developer Photosonics), you may have it somewhere in the manual lying around...
Re: Help with instructions please
Wow, Andrew, thanks for the quick reply ! I'm the only one distinguished ray.. don't know how to contact him ? I instrukcija German/anglickom fit
-
- Автор сайта
- Posts:10238
- Joined:Tue May 30, 2006 20:17
- Location:Екатеринбург
- Has thanked: 134 times
- Been thanked: 556 times
- Contact:
Re: Help with instructions please
YUKO
Contact just: http://www.photosonix.com/contact (Ray Wolfe) If instead of "info" to paste the "ray", go directly to him.
Can try to refer to me.
Contact just: http://www.photosonix.com/contact (Ray Wolfe) If instead of "info" to paste the "ray", go directly to him.
Can try to refer to me.
Re: Help with instructions please
Thank you very much ! Now I will try.
-
- Автор сайта
- Posts:10238
- Joined:Tue May 30, 2006 20:17
- Location:Екатеринбург
- Has thanked: 134 times
- Been thanked: 556 times
- Contact:
Re: Help with instructions please
YUKO
Here more you can be useful.
Here more you can be useful.
Re: Help with instructions please
Andrew, thank you ! You are ahead of my questions on the step
I have this issue a few questions arose :
1. what color diode it is best to use ?
2. can I use mixed colors ?
3. how much power the LEDs draw M. cars (on average)?
4. can be collected if your circuit points to be connected to the machine or to smart phone ? (there is no descriptions for what they are)
5. SV.diodes how to solder ? in parallel or sequentially to each other ?
Thank you
I have this issue a few questions arose :
1. what color diode it is best to use ?
2. can I use mixed colors ?
3. how much power the LEDs draw M. cars (on average)?
4. can be collected if your circuit points to be connected to the machine or to smart phone ? (there is no descriptions for what they are)
5. SV.diodes how to solder ? in parallel or sequentially to each other ?
Thank you
-
- Автор сайта
- Posts:10238
- Joined:Tue May 30, 2006 20:17
- Location:Екатеринбург
- Has thanked: 134 times
- Been thanked: 556 times
- Contact:
Re: Help with instructions please
YUKO
1. For what?
2. Can.
3. 1200mcd
4. to mindmachine. Can and smartphone if you write the program.
5. in parallel.
1. For what?
2. Can.
3. 1200mcd
4. to mindmachine. Can and smartphone if you write the program.
5. in parallel.
Re: Help with instructions please
Andrew, thank you.
That's it, for what purposes, what colors can I use ? where to learn about it ?
I've got assorted glasses from your m. cars and looked like they are soldered. There are a couple of resistors and 2 of the Kander.... It is fundamentally ? or can they not be included in the General scheme ?
https://yadi.sk/i/t332e-IXdMHVT
https://yadi.sk/i/UCqSC2qQdMHVV
https://yadi.sk/i/svR56D87dMHpL
That's it, for what purposes, what colors can I use ? where to learn about it ?
I've got assorted glasses from your m. cars and looked like they are soldered. There are a couple of resistors and 2 of the Kander.... It is fundamentally ? or can they not be included in the General scheme ?
https://yadi.sk/i/t332e-IXdMHVT
https://yadi.sk/i/UCqSC2qQdMHVV
https://yadi.sk/i/svR56D87dMHpL
-
- Автор сайта
- Posts:10238
- Joined:Tue May 30, 2006 20:17
- Location:Екатеринбург
- Has thanked: 134 times
- Been thanked: 556 times
- Contact:
Re: Help with instructions please
YUKO
In schemes I very bad. It can be assumed that the capacitors needed there to filter higher harmonics and ripple approximation to a sine wave (in Innerpulse have a dedicated switch for this). And that's why there are regular diodes??? Maybe for the load? Since Nova Pro glasses with four LEDs on each eye.
In schemes I very bad. It can be assumed that the capacitors needed there to filter higher harmonics and ripple approximation to a sine wave (in Innerpulse have a dedicated switch for this). And that's why there are regular diodes??? Maybe for the load? Since Nova Pro glasses with four LEDs on each eye.
-
- Автор сайта
- Posts:10238
- Joined:Tue May 30, 2006 20:17
- Location:Екатеринбург
- Has thanked: 134 times
- Been thanked: 556 times
- Contact:
Re: Help with instructions please
YUKO
As for the color:
red, white - visualization, focusing attention, and increasing vitality;
green, yellow, orange - all the same, only softer (some red, they do not tolerate) and images significantly less (however, all individually);
blue - sleep, soothe the nerves, does not cause seizures if photoepilation (green and red the most able to trigger an attack);
blue - help with jet lag (increases anxiety in neurotics);
purple - meditation. Interesting color(light). Put the experiment on transmission of light pulses through the skin (blood). Purple is the only light that was passed down from scalp to toes.
The combination of colors:
red and blue - interesting images for meditation (safely when photoepilation);
red and green - interesting ("acid") images (the most dangerous when photoepilation).
As for the color:
red, white - visualization, focusing attention, and increasing vitality;
green, yellow, orange - all the same, only softer (some red, they do not tolerate) and images significantly less (however, all individually);
blue - sleep, soothe the nerves, does not cause seizures if photoepilation (green and red the most able to trigger an attack);
blue - help with jet lag (increases anxiety in neurotics);
purple - meditation. Interesting color(light). Put the experiment on transmission of light pulses through the skin (blood). Purple is the only light that was passed down from scalp to toes.
The combination of colors:
red and blue - interesting images for meditation (safely when photoepilation);
red and green - interesting ("acid") images (the most dangerous when photoepilation).
Re: Help with instructions please
Andrew thank you!
there is not a diode, it is resistors and capacitors. And 2 SD for each eye. Assume that one resistor and one capacitor per pair of SD going. I'm in the schemes is not very ruble...., so I will try Your circuit first points to collect, without any capacitors and resistors for now. How to assemble - accomplish your goal.
PS. For a description of the colors - thank you! Now more or less clear what was happening.
P. S. Rey (u) the letter in 2 languages written (English and Russian). He hasn't replied yet. Zhdems..
there is not a diode, it is resistors and capacitors. And 2 SD for each eye. Assume that one resistor and one capacitor per pair of SD going. I'm in the schemes is not very ruble...., so I will try Your circuit first points to collect, without any capacitors and resistors for now. How to assemble - accomplish your goal.
PS. For a description of the colors - thank you! Now more or less clear what was happening.
P. S. Rey (u) the letter in 2 languages written (English and Russian). He hasn't replied yet. Zhdems..
-
- Автор сайта
- Posts:10238
- Joined:Tue May 30, 2006 20:17
- Location:Екатеринбург
- Has thanked: 134 times
- Been thanked: 556 times
- Contact:
Re: Help with instructions please
In Russian, he knows only three words and then only verbally: "dawai Upham wodki"Юко wrote:P. S. Rey (u) the letter in 2 languages written (English and Russian). He hasn't replied yet. Zhdems..
Re: Help with instructions please
Andrewgood morning.
Alas, Your American friend said that too the car does not know ...
Alas, Your American friend said that too the car does not know ...
Have the Germans on http://www.brainlight.de to write...Hi Yuri,
Sorry, I am not familiar with the Brain Light Synchro SL (or any machine from Light Brain - that sounds like the name of a company). Would like to help, but have no information.
Happy holidays.
Ray
Re: Help with instructions please
Andrew, what voltage one SD to respond to the needs ? 1.5 Volt, 3, 4,5, 9, 12 ?? what is the output voltage of a machine ?Андрей Патрушев wrote:YUKO
Here's another you might need (open in IE)
-
- Автор сайта
- Posts:10238
- Joined:Tue May 30, 2006 20:17
- Location:Екатеринбург
- Has thanked: 134 times
- Been thanked: 556 times
- Contact:
Re: Help with instructions please
And You tester, tester...
Re: Help with instructions please
heh, my machine M. on the 25th the program output kolyshetsya from 1.5 to 9 Volts (!) That is, there must be a DM who can "dance" in this range... You are also such voltage ?
-
- Автор сайта
- Posts:10238
- Joined:Tue May 30, 2006 20:17
- Location:Екатеринбург
- Has thanked: 134 times
- Been thanked: 556 times
- Contact:
Re: Help with instructions please
YUKO
Never been in one.
Have a Nova Pro 100 and SD Innerpulse are at 3V (FV).
SD "dance" is not for voltage, and current.
Never been in one.
Have a Nova Pro 100 and SD Innerpulse are at 3V (FV).
SD "dance" is not for voltage, and current.
Re: Help with instructions please
Thank you. Drove to El. store and get started. How to make - I will unsubscribe
Re: Help with instructions please
Andrew
Glasses nearly ready. One Problemka... how to know what machines the output is left and which right ? Or is it not important ?
Glasses nearly ready. One Problemka... how to know what machines the output is left and which right ? Or is it not important ?
-
- Автор сайта
- Posts:10238
- Joined:Tue May 30, 2006 20:17
- Location:Екатеринбург
- Has thanked: 134 times
- Been thanked: 556 times
- Contact:
Re: Help with instructions please
YUKO
It may happen that differentiation is not, as, for example, in Nova About it.
In audio standard Pinout: tip - left (minus), middle - right (minus), lower - to-earth (+).
In various mashinah on the bottom can be both a plus and a minus (check the "native" glasses with the batteries).
You can also solder a plug with three colored wires and "popereklyuchat".
It may happen that differentiation is not, as, for example, in Nova About it.
In audio standard Pinout: tip - left (minus), middle - right (minus), lower - to-earth (+).
In various mashinah on the bottom can be both a plus and a minus (check the "native" glasses with the batteries).
You can also solder a plug with three colored wires and "popereklyuchat".
Re: Help with instructions please
Andrew thank you very much for the idea, support and quick responses!
In General, I did not wait for an answer and quickly soldered at random. Of course - not correct . Calculate what kind of wiring channels proved to be also very simple. Need original glasses a bit to pull out of the socket so that shone one eye. I had it right. checking the newly-made glasses with the original it became clear that channels must be swapped.
Changed and tried. Class! The light turned evenly diffused and nice. The roof moves are not worse but even better than the original red points, where SD hit right in the eyeball and you need to adjust the brightness first. Here the light was very soft and evenly diffused.
left more space between the LEDs for further experiments. I want to insert another 2 SD of a different color on each eye and see what happens. Also in the "project" glasses with blue, yellow and white SD.
Don't know whether it makes sense to write about it next ?.. If the "Website" that's interesting - can you open the diary to complement this theme.
Thanks again for the support!!!
https://yadi.sk/i/n8dshP3ddTpfE
https://yadi.sk/i/qJXDaD2HdTpej
https://yadi.sk/i/tkmPsb8BdTpes
https://yadi.sk/i/SDzcb_9wdTpf2
https://yadi.sk/i/DUV6k3Z9dTpf6
https://yadi.sk/i/FmnfOKDpdTpfA
In General, I did not wait for an answer and quickly soldered at random. Of course - not correct . Calculate what kind of wiring channels proved to be also very simple. Need original glasses a bit to pull out of the socket so that shone one eye. I had it right. checking the newly-made glasses with the original it became clear that channels must be swapped.
Changed and tried. Class! The light turned evenly diffused and nice. The roof moves are not worse but even better than the original red points, where SD hit right in the eyeball and you need to adjust the brightness first. Here the light was very soft and evenly diffused.
left more space between the LEDs for further experiments. I want to insert another 2 SD of a different color on each eye and see what happens. Also in the "project" glasses with blue, yellow and white SD.
Don't know whether it makes sense to write about it next ?.. If the "Website" that's interesting - can you open the diary to complement this theme.
Thanks again for the support!!!
https://yadi.sk/i/n8dshP3ddTpfE
https://yadi.sk/i/qJXDaD2HdTpej
https://yadi.sk/i/tkmPsb8BdTpes
https://yadi.sk/i/SDzcb_9wdTpf2
https://yadi.sk/i/DUV6k3Z9dTpf6
https://yadi.sk/i/FmnfOKDpdTpfA