Audiostrobe effect

[Ашот Васильевич]

Tell me, are there any computer program, allowing to impose Audiostrobe effect on normal music product. Maybe it's possible to do in some music editors?
For example, there are a number of works and audiopathik I work with and I hotelby to impose on them Audiostrobe effect the way I need it. Glasses to blink with varying frequency in the right part of the work or audiotactile, well, binaural biennia respectively.

I know that audiostrobe effect on the frequency of 19200 Hz. Tried to add a signal to 19200 in Audiodeformator About, added to this signal binaural beat (there is a function in Audiodeformator About), but the diodes on the glasses something never blinking and just burned... Can I something not so do?

[Воффка]

I don't do that, but I have MM diodes are lit when the volume is too large, the volume is lower and they start to blink as it should. Maybe You when applying have not calculated the volume level.

[Андрей Патрушев]

Ashot V.
On the final spectrum (AFC) band 19200Гц should be in the range of-36dB

[к-13]

You can take session BWG or any other similar prog, which has a function of editing sessions - you can only set audiostrobe, and the rest is removed... Result to mix with the desired music track.
You can take any editor(cool edit, for example, Adobe autdition or sony soundforge), generate the frequency of 19200, and then to generate a desired frequency of flashing and mix them together - obtained again to put on the right music...
The options are many, in principle...

[Ашот Васильевич]

Thank you all so much!!!

I'll try using your tips.

[Сержио1]

I want to repeat the question, how do professional authors discs with strobe effect. I wrote music. the composition and want to apply the strobe. Someone did so I can only do what? And you paste offer kakueto alternative. But we need a real solution. Maybe someone knows the frequency code algorithm? of course, someone knows because the disks but write. Certainly there are programs or modular cutting the gate code. Help share information.

[Сержио1]

Patrushev kolis let's lay out the code. Not vranici! You have the same kind of disks with the gate?!

[Андрей Патрушев]

Сержио1
Sapienti sat est.

[Сержио1]

What gender words? Prosilio not evrynite.

[Сержио1]

Between the lines nothing really essentially no.

[димыч]

che is there to think, create in audio editor, the track length with your song, there are bursts of amplitude in the right places in your track
frequency of 19200 Hz, though the copy-paste set, then mixwhite with your track, and the amplitude of audiostrobe should be higher than the total amplitude of the track. Here's a rough description, well, really simple way to make different pieces of audiostrobe with different frequency and applied on the track in the correct order.

[к-13]

How much of midastruck when I'm right in front of your post openly wrote... If you don't like the simple version, can you tell us more, how do clean the gate track in the audio editor I (editors sessions are usually very primitive way, all this issue).
Any audio editor can generate frequencies and superimpose them on one another. This is enough to create the desired session.
Take the generator and set at the intervals you need frequency, and the transition from one frequency to another to do a smooth (generator can generate a falling and rising frequency, if you specify start and end values, the main thing to ask linear, not logarithmic, otherwise it just collapses on the destination and the rest will cut it) in the right kind of signal (rectangle or sine - first works the same at almost any volume, just enough power to level decoding, the second is convenient because changing the volume on the input of the decoder, it is possible to change the duty cycle of the flashes). Then store the result. Then generate the frequency 19200 (sine) over the entire length of the session and put modulation all the beauty of the previous result. In total it turns out only audiostrobe-the track already and need to put a mixing on the sound part. All. Nothing complicated.

Although, it is easier to write a suitable length of the session.

And yet, the first result to impose on any tune, you get a sort of dubstep with the desired frequency. For example, here - a group of "Sea of tranquility" in a dubstep version with modulation 20 Hz - http://yadi.sk/d/tJ6qwnLq2jWar .

[Сержио1]

I know the frequencies and colors to collect. As I understand razmikovich to any gate drive. To see where in what place what color. And frequency as in the eye that will not see? cut these pieces. and then already impose on their composition. I have a MM Nova PRO100, glasses color track. And the designer 100 you can get to use?

[Сержио1]

How much midastruck when I'm right in front of your post openly wrote... If you don't like the simple version, can you tell us more, how do clean the gate track in the audio editor I (editors sessions are usually very primitive way, all this issue).
Any audio editor can generate frequencies and superimpose them on one another. This is enough to create the desired session.
Take the generator and set at the intervals you need frequency,
http://yadi.sk/d/tJ6qwnLq2jWar .

If you go the path of generating frequency audiostrobe in music. editor, what are the frequencies in the editor to generate and what the response is frequency and the color of the flashing LEDs? There is a coding table for these frequencies? Or color coded for the amplitude?

[к-13]

Audiostrobe signal carries information only about the presence of flashes, that is the color of there all the time one is coded, only the flash rate and duty cycle. Colortrak have a mode that changes the color of stimulation depending on the frequency, so you need the documentation to see him.

[Сержио1]

Can't find the info, to Kolor tracks, no expanded technical documentation.

[к-13]

I can't help you - I have no colortrak Make it easier - create a session in which a frequency gradually declines from, say, 35 Hz to zero, run it and write down the timing of color change flicker, and then compare with the session data - match time and will receive the matching frequencies.

[ЗОМБИ]

(Jn)Option
http://rutracker.org/forum/viewtopic.php?t=3700752

has anyone tried... I found it on the Navigator, filled and tried. Now nizzzya for training... can someone try

[к-13]

Logik often talked about them. I only tried it once - according to my feeling, this thing works on the synchronization of the hemispheres, and pretty good.

[крошкин]

This question - here is an audio program which contains sinularia rhythms but there is no gate that would combine with MM whether it is possible to this audio as it is to solder the strobe signal that he would "correctly" worked with MM?

[Андрей Патрушев]

kroshkin
Take 18200Гц carrier, modulate it with the desired frequency (In the same Adobe Audizine), normalize the result to -9dB.
Normalize your audio to -3dB, mixermate with the resulting audiostream make facilities to mix and test in the spectrum below the band 18200Гц was there at the level of 33Дб. If very different (more than 3dB), then lower or turn the volume way up for 18200Гц. All.
Second option: get somewhere working N-P-3 doing the same, only almost automatically...

[крошкин]

What is the first too hard. Also, I don't know what is there in this audio frequencies. And with the help of BWG that you can do something - well, like that ? to surpass a file in the format of BWG and then back but with the gate?
And is there any prog which can be used to determine the frequency of the audio file - alpha theta, and so forth?

[Андрей Патрушев]

kroshkin
There are a couple analyzers binaural beats in the network. For example, bavsa. Unfortunately, stocks are missing, and the upgrade is not a long time.

[крошкин]

chegoy something I do not understand how this Bavai to use the DOS screen and then what? And the other app is called?

[Андрей Патрушев]

And the other app is called?

Search taxis...