Converter USB-COM

Glasses, headphones and other components
Эйнштейн
Posts:1
Joined:Thu Jun 28, 2007 23:23
Converter USB-COM

Post by Эйнштейн » Fri Jun 29, 2007 0:19

Recently purchased Converter USB-COM for upload sessions Innerpulse via USB port. Installed the necessary drivers, but the program Light/Sound Librarian determines the presence of 4 COM ports that do not want to find a device connected via a Converter to USB.
Note. The system has 6 USB ports and 2 legacy COM ports through one of which the session loaded without any problems. But still for me it is more convenient to use a USB, to the same COM port occupied by the modem, and messing around with plugs and screws every time is not desirable.
And especially now, not everyone has COM ports and this question is relevant.

Сперанца
Posts:178
Joined:Tue Jun 19, 2007 21:49
Location:Москва

Post by Сперанца » Fri Jun 29, 2007 9:11

Einstein
And tell me where it is sold?
And then I have a wire to the computer that came in the kit to mindmachine, does not fit to the laptop. I would like to buy this wire, to one side of sterek to mindmachine, and on the other USB ports. COM port - what is it? :roll:
And if I am posting to buy does not arise if I had difficulty pumping with the laptop in the car, as You have.
Session Patrushev want to download morning and evening, well and disks are Healing and the Conductor listen via mindmachine.
Thank you.

Андрей Патрушев
Автор сайта
Posts:10238
Joined:Tue May 30, 2006 20:17
Location:Екатеринбург
Has thanked: 134 times
Been thanked: 556 times
Contact:

Re: Converter USB-COM

Post by Андрей Патрушев » Mon Jul 02, 2007 15:08

Эйнштейн wrote:To buy Converter USB-COM for upload sessions Innerpulse via USB port. Installed the necessary drivers, but the program Light/Sound Librarian determines the presence of 4 COM ports that do not want to find a device connected via a Converter to USB.
Note. The system has 6 USB ports and 2 legacy COM ports through one of which the session loaded without any problems. But still for me it is more convenient to use a USB, to the same COM port occupied by the modem, and messing around with plugs and screws every time is not desirable.
And especially now, not everyone has COM ports and this question is relevant.
That's right - the system polls the COM ports at addresses, not USB. But if you approach this issue seriously, then downloaded the session You will need approximately three weeks, so "everytime" You will have to not happen so often.

User avatar
Князевский
Posts:304
Joined:Sat Jul 28, 2007 21:12
Location:посёлок "ЗАРЯ"

Re: Converter USB-COM

Post by Князевский » Mon Aug 13, 2007 14:49

Little understood, so that YUSB on WHOM has no real use?

Лори-Мори
Posts:29
Joined:Wed Oct 03, 2007 13:19
Location:Москва

Post by Лори-Мори » Wed Oct 03, 2007 16:53

Sorry, I too want his mind to buy a car. But without the ability to change anything for me, no device - no device, and without loading new sessions, I did not do (and then, of course, once mastered). So if I want to buy InnerPulse, but on my computer there is no COM port, adapter USB-COM useless? And I completely lose all the joys download new sessions?

User avatar
Ростислав
Posts:1253
Joined:Tue Sep 16, 2008 16:37
Location:Дальше только земля Франса Иосифа
Has thanked: 35 times
Been thanked: 28 times
Contact:

Post by Ростислав » Wed Dec 03, 2008 0:10

Friends help to change the cord of a lump in yusbi! And then on the laptop I have no Comporta! Really looking forward to.

Л-31

Post by Л-31 » Tue Dec 16, 2008 0:42

Try mastercase adapter USB-COM.
It adds to the virtual com port that programs

Алекс405
Posts:1
Joined:Tue Sep 08, 2009 10:13
Been thanked: 1 time

Post by Алекс405 » Tue Sep 08, 2009 10:18

Hello.
Maybe my message is no longer relevant, but still write, maybe someone should.
The USB-COM adapters are sold in any computer lounge.
Long with it suffered, defined as a COM 20 and more.
And LSlib only 1,2,3,4 –COM ports.
Nothing intelligible about this problem said.
Found how to solve it, was simple.
Go to device Manager select ports(COM & LPT) there should be determined
transition USB-COM. Open the properties tab: port settings – advanced
you have the option to change the port number to select free from 1 to 4 if busy
can renaming to the desired port free for our purpose.
And that's all. Good luck to everyone.

Андрей Патрушев
Автор сайта
Posts:10238
Joined:Tue May 30, 2006 20:17
Location:Екатеринбург
Has thanked: 134 times
Been thanked: 556 times
Contact:

Post by Андрей Патрушев » Tue Sep 08, 2009 20:40

Алекс405 wrote:Hello.
Maybe my message is no longer relevant, but still write, maybe someone should.
The USB-COM adapters are sold in any computer lounge.
Long with it suffered, defined as a COM 20 and more.
And LSlib only 1,2,3,4 –COM ports.
Nothing intelligible about this problem said.
Found how to solve it, was simple.
Go to device Manager select ports(COM & LPT) there should be determined
transition USB-COM. Open the properties tab: port settings – advanced
you have the option to change the port number to select free from 1 to 4 if busy
can renaming to the desired port free for our purpose.
And that's all. Good luck to everyone.
Thank you very much!
With Your permission :) will move Your post to the manual.

n

Post by n » Sat Nov 14, 2009 21:43

Does anyone adapter USB-COM
from wasterkit with innerpulse
I have a machine is determined
Even the old session are erased
The new session after downloading no
In innerpulse displayed FnA
Can someone tell me what it is

User avatar
Экко
Posts:668
Joined:Thu Sep 17, 2009 13:28
Location:Владивосток
Has thanked: 2 times
Been thanked: 4 times
Contact:

Post by Экко » Sun Oct 10, 2010 15:55

the USB-COM Adapters are sold in any computer lounge.
why USB? Best option: pci slot COM port

гость3
Posts:3
Joined:Sat Nov 06, 2010 21:22

Re: Converter USB-COM

Post by гость3 » Thu Mar 15, 2012 15:25

Good day! Q razrabotchikom
please tell me, is it possible to purchase separately date cable to download sessions for machine inner pulse.
Happened byada lost original com cable, cat. I went complete with a mind machine. in retail, in principle, such cables do not exist.
HELP! I will be very grateful for your help, it would be the best example after sales customer service.
(just in case, I still have the warranty card and the required documentation for mind machine).
:wiz

User avatar
ЛИЛИЯ-Р
Posts:3002
Joined:Thu Oct 11, 2007 21:25
Location:Москва
Has thanked: 478 times
Been thanked: 264 times

Re: Converter USB-COM

Post by ЛИЛИЯ-Р » Thu Mar 15, 2012 16:03

гость3 wrote:Good day! Q razrabotcheskogo please, is it possible to purchase separately date cable to download sessions for machine inner pulse.


The cable can be purchased from us ,the price of 300 rubles.

User avatar
Амаури
Posts:17
Joined:Sun Feb 03, 2013 3:43
Location:Киев
Has thanked: 1 time
Been thanked: 2 times

Re: Converter USB-COM

Post by Амаури » Wed Aug 14, 2013 22:20

Hello

I also have here a similar situation as n :cry:

Finally got the adapter, I took a USB-RS232 (USB Cable, VCOM VUS7050, USB A (m) - 9pin COM (m) 1.2 m)
Image,
all set up, hooked up Innerpulse, ran it, added a few sessions of A. Patrushev, pressed "Download Library (Append)"as was written "you will see the fun of running lights to your car"it was also :) but then on the display the number of established sessions, and "FnA" :cry:
well, that is, in the end, the session is not loaded, there is no section u

what to do? how to be? please tell me

Андрей Патрушев
Автор сайта
Posts:10238
Joined:Tue May 30, 2006 20:17
Location:Екатеринбург
Has thanked: 134 times
Been thanked: 556 times
Contact:

Re: Converter USB-COM

Post by Андрей Патрушев » Thu Aug 15, 2013 15:11

Amauri
And You through LSD or through the Library loaded? Port what number is it assigned?

User avatar
Амаури
Posts:17
Joined:Sun Feb 03, 2013 3:43
Location:Киев
Has thanked: 1 time
Been thanked: 2 times

Re: Converter USB-COM

Post by Амаури » Thu Aug 15, 2013 15:18

Андрей Патрушев wrote:Amauri
And You through LSD or through the Library loaded? Port what number is it assigned?
with this program, LslibCOM1

Андрей Патрушев
Автор сайта
Posts:10238
Joined:Tue May 30, 2006 20:17
Location:Екатеринбург
Has thanked: 134 times
Been thanked: 556 times
Contact:

Re: Converter USB-COM

Post by Андрей Патрушев » Thu Aug 15, 2013 15:25

Amauri
And the mode is append or Clear?
Accordingly, the total capacity of all the loaded sessions corresponds to the free space in the car?
The car, apparently, decided correctly and in the Device line is Your brand?

User avatar
Амаури
Posts:17
Joined:Sun Feb 03, 2013 3:43
Location:Киев
Has thanked: 1 time
Been thanked: 2 times

Re: Converter USB-COM

Post by Амаури » Thu Aug 15, 2013 15:33

Андрей Патрушев wrote:Amauri
And the mode is append or Clear?
Accordingly, the total capacity of all the loaded sessions corresponds to the free space in the car?
The car, apparently, decided correctly and in the Device line is Your brand?
just to make sure I tried all of these items:
Download Session(Append)
Download Library (Append)
Download Session(Clear)
Download Library (Clear)
Yes, do not exceed loading capacity...
and the brand has exhibited Innerpulse

And maybe to try LSD?
Maybe still a problem in this adapter?

Андрей Патрушев
Автор сайта
Posts:10238
Joined:Tue May 30, 2006 20:17
Location:Екатеринбург
Has thanked: 134 times
Been thanked: 556 times
Contact:

Re: Converter USB-COM

Post by Андрей Патрушев » Thu Aug 15, 2013 15:38

Amauri
Well, I don't know what to do. :? I, in General, not a specialist in computers.
Oh yeah, one more thing - machine should be powered from the adapter, not on batteries.

User avatar
Амаури
Posts:17
Joined:Sun Feb 03, 2013 3:43
Location:Киев
Has thanked: 1 time
Been thanked: 2 times

Re: Converter USB-COM

Post by Амаури » Thu Aug 15, 2013 15:50

Andrei Patrushev
Yes, I did, from the adapter.
tried using LSD download - the same problem FnA
it will be necessary to find a computer and try from it...because most likely the problem is in the adapter :cry:

thanks for the replies :)

Андрей Патрушев
Автор сайта
Posts:10238
Joined:Tue May 30, 2006 20:17
Location:Екатеринбург
Has thanked: 134 times
Been thanked: 556 times
Contact:

Re: Converter USB-COM

Post by Андрей Патрушев » Thu Aug 15, 2013 15:56

Amauri
And, by the way, just in case: on the CD to the adapter there is a large list of folders with different connectivity options, so it is necessary to RS232 choose during installation. You can still try to demolish the installation and pereustanovit in the new.

Легого
Posts:18
Joined:Sun Feb 22, 2015 14:46

Re: Converter USB-COM

Post by Легого » Fri Apr 03, 2015 3:34

Andrey, tell me, and without the power cord session cannot be upgraded (from batteries)? I'm honestly surprised(((( also as an extra accessory is...


I tried all described instructions for installing... after adding sessions to the library click to load the library, and then do nothing.... on the machine screen is not responding...the program was thinking and all....like downloaded... No running lights, no FnA at InnerPulse...

I'm also using a com-usb adapter I tried.... the port he specified....

I need to separately purchase a power cord?

Андрей Патрушев
Автор сайта
Posts:10238
Joined:Tue May 30, 2006 20:17
Location:Екатеринбург
Has thanked: 134 times
Been thanked: 556 times
Contact:

Re: Converter USB-COM

Post by Андрей Патрушев » Fri Apr 03, 2015 9:31

Lung
It is possible and on batteries. Only the batteries we sell pretty rested somewhere and therefore already hooked...
I tried all described instructions for installing... after adding sessions to the library click to load the library, and then do nothing.... on the machine screen is not responding...the program was thinking and all....like downloaded... No running lights, no FnA at InnerPulse...
Maybe everything is already loaded, have You checked?
And the connection with the device installed?

Легого
Posts:18
Joined:Sun Feb 22, 2015 14:46

Re: Converter USB-COM

Post by Легого » Fri Apr 03, 2015 13:34

When I pressed test connection it gave me the message about the number of sessions possible, etc. Apparently he found the device. And then the picture is as I described.... Directory u appeared :((((

Maybe someone can suggest a different cause.... System requirements PC not important? Folder I as it is written in the root of the C drive left.... I do not understand why does not work....

Андрей Патрушев
Автор сайта
Posts:10238
Joined:Tue May 30, 2006 20:17
Location:Екатеринбург
Has thanked: 134 times
Been thanked: 556 times
Contact:

Re: Converter USB-COM

Post by Андрей Патрушев » Fri Apr 03, 2015 13:38

Легого wrote:Directory u appeared
And where he was supposed to appear? :shock:

Post Reply