The brightness in the glasses
My InnerPulse when brightness is below average points begin to fail, it will begin to blink one eye instead of two, then stall light at all, neither from that nor from this again both. I from the beginning thought that broke the machine then let's climb on the settings - thought that there inadvertently changed... In General, when the brightness set in the middle of everything once again function correctly.
It turns out sleepy session, with the average brightness in Premium white glasses listening is not comfortable, because it is too bright, and the small glasses are in one place.
As the option remains to buy premium sunglasses green. That is not right, is it not better to have glasses that already have all the colors and everything is in order with the brightness...
It turns out sleepy session, with the average brightness in Premium white glasses listening is not comfortable, because it is too bright, and the small glasses are in one place.
As the option remains to buy premium sunglasses green. That is not right, is it not better to have glasses that already have all the colors and everything is in order with the brightness...
Why not buy ColorTrack. As I understand it there is any color setting and brightness there is no problem?Карил wrote: As the option remains to buy premium sunglasses green. That is not right, is it not better to have glasses that already have all the colors and everything is in order with the brightness...
I agree! ColorTrack in this regard the best option!!Влад wrote:Why not buy ColorTrack. As I understand it there is any color setting and brightness there is no problem?Карил wrote: As the option remains to buy premium sunglasses green. That is not right, is it not better to have glasses that already have all the colors and everything is in order with the brightness...
Oh my, what patience You have, Carilo... Half light range glasses not working, and You casually mention it in a parallel thread... Looks really valid machine - such tranquility! It seems that no one on this defect is not mentioned... And as for ColorTrack this area, describe who he uses, plzz. Prosyanovskoe glasses, by the way, is also not ideal - in their forum I cu. not found any rave review and critical about the quality of execution and design has...
палч wrote: Half light range glasses not working
I said roughly... When the brightness is set to minimum possible level, then begin the problems described above. Well, it's very noticeable. Are looking, BAM the light is gone vapche. Brightness will turn slightly up and it worked again.Dimas wrote:What exactly is not working?When?
In the lower half of the failures happen, but I dunno by heart session not taught maybe it's supposed to work.
Well, definitely, checked last night, I put the brightness until it stops blinking and everything is fine no sudden shutdowns. The truth of such an awesome brightness when the glasses are removed before the eyes spots then.
About the audio-strobe can not say anything, as "Massage brain" without it, and the Explorer I like do without glasses to listen.
Seems that the oscillator circuit light flashes for glasses a little is not finalized. While InnerPulse generally looks in terms of design it seems to me natural. Think of mind machines, it's time to get colorful LCD screens and most cell phones. Just cell is at all in contrast to MM, so why bother me with that machine a bit unpolished and glucemia.
Well that all works no doubt and shouldn't be. Relaxing session to relax and energeticheskii Vice versa, respectively. People cartoons really sees, and I unfortunately not. But I think will come with time...палч wrote:Looks really valid machine - such tranquility!
-
- Автор сайта
- Posts:10238
- Joined:Tue May 30, 2006 20:17
- Location:Екатеринбург
- Has thanked: 134 times
- Been thanked: 556 times
- Contact:
Definitely try but I have no sessions were not loaded yet.
In the case of the standard sessions... I decided S01 try to get to sleep faster. Well put on the bare minimum the brightness, blinking like okay. And one thing programmed into the session a gradual decrease in brightness, and the other when a few minutes one eye blink...
If anyone has any InnerPulse and white premium sunglasses try. I don't think it's my personal glitch. Is likely to so behave all Innerpulse.
And here's another thought. The first time I thought the batteries were dead. Ie headphone enough voltage, and for glasses anymore. Now the replacement battery also did not help.
It's not a big problem to buy bright glasses and all. And indeed, the world is not perfect, computers crash, cell phones that just do not do. For example, erase all telephone numbers, and then suddenly remember again.
In the case of the standard sessions... I decided S01 try to get to sleep faster. Well put on the bare minimum the brightness, blinking like okay. And one thing programmed into the session a gradual decrease in brightness, and the other when a few minutes one eye blink...
If anyone has any InnerPulse and white premium sunglasses try. I don't think it's my personal glitch. Is likely to so behave all Innerpulse.
And here's another thought. The first time I thought the batteries were dead. Ie headphone enough voltage, and for glasses anymore. Now the replacement battery also did not help.
It's not a big problem to buy bright glasses and all. And indeed, the world is not perfect, computers crash, cell phones that just do not do. For example, erase all telephone numbers, and then suddenly remember again.
- Андрей Кабанков
- Автор сайта
- Posts:3875
- Joined:Fri Mar 31, 2006 8:19
- Location:Москва
- Has thanked: 1 time
- Been thanked: 182 times
- Contact:
-
- Posts:30
- Joined:Tue Mar 20, 2007 5:39
- Location:Смоленск
It's all in the features of the trimmer, so the brightness of the right and left LEDs are different.I decided S01 try to get to sleep faster. Well, put on with a low brightness, blink seems okay. And one thing programmed into the session a gradual decrease in brightness, and the other when a few minutes one eye blink...
If anyone has any InnerPulse and white premium sunglasses try. I don't think it's my personal glitch. Is likely to so behave all Innerpulse.
And here's another thought. The first time I thought the batteries were dead. Ie headphone enough voltage, and for glasses anymore. Now the replacement battery also did not help.
It's not a big problem to buy bright glasses and all. And indeed, the world is not perfect, computers crash, cell phones that just do not do. For example, erase all telephone numbers, and then suddenly remember again.
A few outputs:
1. Brightness closer to the maximum. However glasses Premium will not be very comfortable.
2. Use glasses Standard.
3. To enter between the device and points additional trimming resistor, and preferably two, independent for each channel to balance the brightness.
And there is no option to load glasses in photoshop and put the brightness slider, curves or levels? Shuchyu...
p.s.
Resistors what denomination?
Separate is better not to put, I think different brightness (even small quantities) can cause separate stimulation of the hemispheres of the brain. So either a dual or two regular shells.
p.s.
Resistors what denomination?
Separate is better not to put, I think different brightness (even small quantities) can cause separate stimulation of the hemispheres of the brain. So either a dual or two regular shells.
Last edited by Карил on Thu May 24, 2007 11:44, edited 1 time in total.
-
- Автор сайта
- Posts:10238
- Joined:Tue May 30, 2006 20:17
- Location:Екатеринбург
- Has thanked: 134 times
- Been thanked: 556 times
- Contact:
-
- Автор сайта
- Posts:10238
- Joined:Tue May 30, 2006 20:17
- Location:Екатеринбург
- Has thanked: 134 times
- Been thanked: 556 times
- Contact:
-
- Posts:30
- Joined:Tue Mar 20, 2007 5:39
- Location:Смоленск
- Андрей Кабанков
- Автор сайта
- Posts:3875
- Joined:Fri Mar 31, 2006 8:19
- Location:Москва
- Has thanked: 1 time
- Been thanked: 182 times
- Contact:
Adjusting the original brightness of the LEDs on the right and left of the inner pulse :
Enter by pressing the DOWN button in PPr, nazimiye PLAY, blink two LEDs
once I press PLAY, there is a frequency (for example, 7.50); the button SELECT
find oPL, I press PLAY, there is oFc (o - top); the second pressing
the SELECT button is called obr (o - top); the UP and DOWN buttons to choose
between the three positions L99 - reduces the intensity of the left points (continuing
press the same button), leaving the right; 100 - points, both Shine equally;
r99 - reduces the intensity of the right points (continuing to press the same
button) without touching the left; twice click the PLAY button (quickly) to
complete.
Enter by pressing the DOWN button in PPr, nazimiye PLAY, blink two LEDs
once I press PLAY, there is a frequency (for example, 7.50); the button SELECT
find oPL, I press PLAY, there is oFc (o - top); the second pressing
the SELECT button is called obr (o - top); the UP and DOWN buttons to choose
between the three positions L99 - reduces the intensity of the left points (continuing
press the same button), leaving the right; 100 - points, both Shine equally;
r99 - reduces the intensity of the right points (continuing to press the same
button) without touching the left; twice click the PLAY button (quickly) to
complete.
-
- Автор сайта
- Posts:10238
- Joined:Tue May 30, 2006 20:17
- Location:Екатеринбург
- Has thanked: 134 times
- Been thanked: 556 times
- Contact:
-
- Автор сайта
- Posts:10238
- Joined:Tue May 30, 2006 20:17
- Location:Екатеринбург
- Has thanked: 134 times
- Been thanked: 556 times
- Contact:
Because the adhesive seam exactly in half does not work. And the double thickness on the edges of a glutinous seam less to cut the skin.торк wrote:why 2ш? - IMHO, the eyes that I also have 2 BUT the balls cut popolamie . 4 pricesonline for 2 eyes,,, Il
You mean what 1sh 1колпак can go to the main Apple(big part) and 1 part of waste(in small part) - napopolam
Do not forget to paint these balls... Draw Bo-donated-ie pupils... In the event that if someone pleases you, to disturb you so neatly take off the glasses and just hypnotize him their "opinion" after installation do not continue to disturb.Андрей Патрушев wrote:Because the adhesive seam exactly in half does not work. And the double thickness on the edges of a glutinous seam less to cut the skin.торк wrote:why 2ш? - IMHO, the eyes that I also have 2 BUT the balls cut popolamie . 4 pricesonline for 2 eyes,,, Il
You mean what 1sh 1колпак can go to the main Apple(big part) and 1 part of waste(in small part) - napopolam
PS But, really wonder what happens. As he was faced with the problem of excessive brightness.
-
- Автор сайта
- Posts:10238
- Joined:Tue May 30, 2006 20:17
- Location:Екатеринбург
- Has thanked: 134 times
- Been thanked: 556 times
- Contact:
But the balls just to paint and still do not - all ganzfeld-effect demolish.Иван_IV wrote:Do not forget to paint these balls... Draw Bo-donated-ie pupils... In the event that if someone pleases you, to disturb you so neatly take off the glasses and just hypnotize him their "opinion" after installation do not continue to disturb.Андрей Патрушев wrote:Because the adhesive seam exactly in half does not work. And the double thickness on the edges of a glutinous seam less to cut the skin.торк wrote:why 2ш? - IMHO, the eyes that I also have 2 BUT the balls cut popolamie . 4 pricesonline for 2 eyes,,, Il
You mean what 1sh 1колпак can go to the main Apple(big part) and 1 part of waste(in small part) - napopolam
PS But, really wonder what happens. As he was faced with the problem of excessive brightness.
Hmm, yeah... got excited a bit....Андрей Патрушев wrote:But the balls just to paint and still do not - all ganzfeld-effect demolish.Иван_IV wrote: do not forget to paint these balls... Draw Bo-donated-ie pupils... In the event that if someone pleases you, to disturb you so neatly take off the glasses and just hypnotize him their "opinion" after installation do not continue to disturb.
PS But, really wonder what happens. As he was faced with the problem of excessive brightness.