About the glasses

Glasses, headphones and other components
Сомневающийся
Posts:16
Joined:Fri Dec 21, 2007 1:11

Post by Сомневающийся » Thu Dec 27, 2007 1:49

so guys, I stollco just been reading here but did not understand color track the bad points or what bc

User avatar
Pavel
Posts:442
Joined:Wed Jan 17, 2007 19:11
Location:Латвия

Post by Pavel » Thu Dec 27, 2007 2:55

>so guys, I stollco just been reading here but did not understand color track the bad points or what

Kolor-track - very good points - you can put almost any color - there are only 21 colors - for example, I like it white and blue-red.

But over time want something brighter and more powerful and here to the aid of glasses-trovit.

And if you contradicts to buy such expensive sunglasses the load to colortrak, then do them with your hands for $ 20 as I am: and you will have self-made happiness in the form of trouvait points. Fortunately the Instructions gave just Alexander, for which he had great thanks.

In principle, even colortrac can not take it, and do yourself a TRU glasses: white, green, yellow, red, etc. colors.

$ 20 for the glasses multiply 20 colors and get $ 400 - the approximate total value of Colotech + trovit.

Instead Colotech + trovit do you have glasses for all occasions and all with the prefix TRU.
...............................................

By the way, I put the silicone on the glasses. The second day is dry and smells: smells nasty and acetic acid.

Those who hope to get brightness above simple truview, those waiting bummer/disappointment: I tested today max. the brightness is the same as that of truview.

Most likely on innerpulse is a limit on the output means on the glasses, because ordinary batteries self-made glasses shone much brighter.

User avatar
Pavel
Posts:442
Joined:Wed Jan 17, 2007 19:11
Location:Латвия

Post by Pavel » Thu Dec 27, 2007 3:04

Took the CD "Island of glass" and checked on it my new glasses:

images began to appear easier and extravagant. Mind tried familiar features to make the whole picture, but it is still crazy it looked. :roll:

Although glasses truwit, but the white color did not exist. :cry: Was the whole palette of the rainbow, but white was not. :cry:

Let's see how it will be with a MM and drives A. P. :oops:

User avatar
Pavel
Posts:442
Joined:Wed Jan 17, 2007 19:11
Location:Латвия

Post by Pavel » Thu Dec 27, 2007 3:20

Pavel wrote:Is calotren + trovit do you have glasses for all occasions and all with the prefix TRU.
Although still the question:

if you suffer with self-made points: holes drilled to gently bend the diodes need much wire to cut to be careful, to solder you just need, to glue evenly - it seems easier to just buy calotren.

Ратилен
Posts:3
Joined:Sun Dec 23, 2007 6:08
Contact:

Post by Ратилен » Mon Dec 31, 2007 5:30

Gentlemen, why buy the diodes nymagazine ? Cheaper to buy a Chinese lantern and desoldering the diode from it. For example, 41-diode Chinese costs about 350 rubles, less than 10 cents per diode, instead of $1.40 :)
And I have a question for all - something I do not understand, unless the diodes in each eye are connected in parallel ? As I recall, somewhere on this same forum I read that the right half of the images of both eyes is processed in right hemisphere, and left - left. So the purpose of our impact - resonant amplification of certain wavelengths in the brain, you need one channel to "hang" right three diodes with each the eyes, on the other - respectively, the left three diodes with each eye... Tell me pliz, and then can't wait :shock:and "overclocking" will collect two copies, good enough diodes :)))

Андрей Патрушев
Автор сайта
Posts:10238
Joined:Tue May 30, 2006 20:17
Location:Екатеринбург
Has thanked: 134 times
Been thanked: 556 times
Contact:

Post by Андрей Патрушев » Mon Dec 31, 2007 11:17

Ратилен wrote:gentlemen, why buy the diodes nymagazine ? Cheaper to buy a Chinese lantern and desoldering the diode from it. For example, 41-diode Chinese costs about 350 rubles, less than 10 cents per diode, instead of $1.40 :)
And I have a question for all - something I do not understand, unless the diodes in each eye are connected in parallel ? As I recall, somewhere on this same forum I read that the right half of the images of both eyes is processed in right hemisphere, and left - left. So the purpose of our impact - resonant amplification of certain wavelengths in the brain, you need one channel to "hang" right three diodes with each the eyes, on the other - respectively, the left three diodes with each eye... Tell me pliz, and then can't wait :shock:and "overclocking" will collect two copies, good enough diodes :)))
Yes, all right. :)

Александр_
Posts:598
Joined:Thu Jun 21, 2007 13:34
Location:Винница
Contact:

Post by Александр_ » Mon Dec 31, 2007 13:32

About diodes, I don't know.
apparently they are in Latvia is more expensive.
we have 15 cents.

Also, do not know what they are in the Chinese power.

And about what you need to hang three diodes on the right, and three diodes on the left, it's in my diary this illustration zaposlena was.

I'm on this forum I learned about this location from Patrushev.
But after he Packed his.

I commotional a score based on the layout of the standard photosonics.

And Retilen can do for this new scheme.
And the results in the Studio ! :)

User avatar
Pavel
Posts:442
Joined:Wed Jan 17, 2007 19:11
Location:Латвия

Post by Pavel » Tue Jan 01, 2008 0:40

"What about the diodes I don't know.
apparently they are in Latvia is more expensive.
we have 15 cents."


We're a small town and the only radio shop deign to put up any prices.

"And about what you need to hang three diodes on the right, and three diodes on the left, it's in my diary this illustration zaposlena was. "

Interesting.
So the left channel to bring the left three diodes on the left and right sides. And the right channel to bring right to the three diodes on the left and right sides. The following points you will make.

Ратилен
Posts:3
Joined:Sun Dec 23, 2007 6:08
Contact:

Post by Ратилен » Sun Jan 13, 2008 9:05

The results I would be willing to bring to the Studio, but my amp to which I connect it all, buggy on high power and is monovski :( Both understand, and describe what happened =)
And while I do so.
In stock - only samopaly points. Strobe Detector's no no. But I want to see the glasses flashing as I need, and it is possible to listen to music from the same source (from a computer).
Found a solution though not very elegant, but it's there:
1) to increased (up to ~3.5 volts) to the audio signal connect two diode bridge - rectifier (one for each channel), and after them glasses. It turns out that the louder the sound, the brighter the diodes burn, but burn start on volume of about 50-70% of the maximum.
2) With the help of his simple little programs generate signals of desired frequency (e.g. 8 Hz) carrier frequency at 1/2 the sampling rate, i.e., 22050 Hz, max. volume ~80%. Such high-frequency peep is heard little and almost does not interfere.
3) turn on the music at a volume about 50%, parallel launch "squeak". And the headphones and glasses connected to the same audio output. Music has little effect on the glasses, and "squeak" almost distorts the music. Everyone is happy =).
Soon I amp, which will have to zaglyuchit in my cruel experiments, describe what happened.
And with the simultaneous blinking of all the diodes almost no effect :(

P. S: There is an easier way of making points. It will fit any unwanted glasses, even with glasses ! Instead of perforate native "glass" (plastic) you can do this:
1) take out the glasses from spectacles,
2) put them on any nonsense from a suitable plastic box from under the sardines, a container of shampoo, etc., - running his marker,
3) cut with scissors inserted in the socket. If you need to bring a file ;)
Plus the fact that you can do different "insert" with the diodes, including differently connected. And if something blew - not a pity, take another piece of plastic, cut out and all... =)

And power diodes in the "Chinese" is always about the same, especially in manythe diode lights...<

User avatar
Князевский
Posts:304
Joined:Sat Jul 28, 2007 21:12
Location:посёлок "ЗАРЯ"

Post by Князевский » Sun Jan 13, 2008 21:07

And we in zajigalki diodes put the flashlight and it turns out podrigalo :)
A dozen for 3 rubles
Colorful

венн
Posts:16
Joined:Tue Jul 17, 2007 22:51

Post by венн » Sun Jan 20, 2008 13:51

I'm self-made glasses is also made to work with BWG and MindExploerSW - they themselves are software generators
Hence the question - can the points be connected to another port on the computer
Because apparently to put a splitter on the audio output does not work - load on the soundcard. A LTP port on the laptop no
Anyone knows?
PS decoder is also assembled to the glasses - everything works

User avatar
Князевский
Posts:304
Joined:Sat Jul 28, 2007 21:12
Location:посёлок "ЗАРЯ"

Post by Князевский » Tue Jan 22, 2008 20:34

here is spinning the info on the adapter USB COM, not expensive like it was.
And what kind of decoder?

венн
Posts:16
Joined:Tue Jul 17, 2007 22:51

Post by венн » Tue Jan 22, 2008 23:56

Decoder site bwg.com for bwg generator
Allows you to watch the gate during the playback sessions from BWG
Assembled on 2 circuits 567
There is one disadvantage - requires a second audio output that is not really a decoder and filter
T e with the sound remove the sound on the earphone and the second audio signal through the decoder on the glasses
Points made by myself for 30 minutes
The decoder I made at work for 2 hours(the chip he bought - 2 PCs -70 rubles ) friends electronics - free
All this FREE stuff works great
While only connected to the LPT port of the Three wires hanging every shoved in his dico
Waiting for messages on this issue I Think the USB plug there like
those 2 outputs and 1 common
All this Pribluda you can lose the session in the following formats lss mxr mxi ses - in the presence of a bend from Exploera Mind - Mind Exploer SW 3.8
Demo version free off the website-does everything except convert to wav
Here on the forum all the links somewhere scattered

User avatar
Лайтмен
Posts:17
Joined:Sat Mar 08, 2008 13:38

Post by Лайтмен » Sat Mar 08, 2008 19:53

VennUSB serial port, and not parallel, as LPT. Output contact there's only one, so without a microcontroller to do nothing.
The outer two contacts is zero (ground) and +5 V power supply, two internal signal (input and output). So it's not so simple.

But what is the relationship between the described decoder and LPT - sorry, I do not understand :( The decoder on an input audio signal, and in LPT, we may immediately issue a signal for controlling the diodes...

P. S: Spud all the old will build a strobe decoderthat have been found, and described in the subject Strobe decoder with their hands

АлексанрД

Post by АлексанрД » Wed Apr 02, 2008 4:21

It is possible and on USB do easily, Preobrazovatel chips is full of different manufacturers, there's also the driver for this mikosham, when connecting such a scheme would appear LPТ port with him and you can take the signal, discrete, better the output field to put the keys so less likely to burn the chip with the USB-LPT (for example FT245BQ) here by the way, in the forum scheme I see a small contradiction, said phase signal has a value, and the scheme of single-stage transistor amplifier, i.e. its output signal is inverted about
венн wrote:There is one disadvantage - requires a second audio output that is not really a decoder and filter
T e with the sound remove the sound on the earphone and the second audio signal through the decoder on the glasses
strange approach, why should the second audio output? on-Board decoder put the headphone Jack in parallel with them cling to the decoder, you can pre-process the signal to analog active filters, circuits with four operationname in one case fully, we can cut the influence of greater and lesser frequency at the input of the decoder

АлексанрД

Post by АлексанрД » Wed Apr 02, 2008 4:59

венн wrote:Because apparently to put a splitter on the audio output does not work - load on the soundcard. A LTP port on the laptop no
Anyone knows?
about LPT I said above, about the load - look at the documentation for the LM567 Input Resistance max 20 kOm, if You are confused by this value - it is preliminary possible to pass through operatsionnyi increasing the input impedance to several hundred ohms, the technical difficulties as you can see - no...

венн
Posts:16
Joined:Tue Jul 17, 2007 22:51

Post by венн » Sun Apr 20, 2008 19:38

Thank you all
Received from the specialists exactly the same dully
All corrected and brought to mind
Having 2 branded machines to self-made Narada
The second master now points to where you can change the cost established by the diodes (you can put the Board with the other diodes, connect one channel on the right side of both eyes, etc.)
For those who doubt the health can put the video report at Kvik the Time - renting the camera Just let someone explain how it all to put here
If anyone need it of course

User avatar
САДОвник
Posts:23
Joined:Tue Apr 01, 2008 18:17
Location:Киев

Post by САДОвник » Tue Apr 29, 2008 14:06

Good day... I have been reading passion for self-made points, I wanted myself. Bought a message of diodes to 3.5 or 3.6 To nepomnyu already, but shines very pretty :roll: half power on the inner pulse sufficient for a complete education(well, at least the bottom of the eyeball :oops: ) The whole scheme, including Adidas sunglasses made in Italy, cost $ 6. Problems switching diodes can be solved very simply. To nebylo delema, what to solder, then simply buy or vypivaet destinationy switch. In the middle two legs solder-feeding the left and right signal to the right group of the left and right points of the right and the left group the left and the left right brazed on either side of the cross shorted contacts. As a result, a simple click we switch it on, what's so debated. From my experience I can only say that when applying a PL signal in each eye newarchive more, especially listening to the gate drives. Here I am just wondering, in color the tracks this is not possible in one eye is different along the length of pulses to send(one color). Where then is hiding the truth :? And about the pure white light emitted by the diodes. I like a bit of a photographer and not really a little printer, I can say that the white light(radiation) or color(reflection) is automatically assigned by the brain in the observed scene to the brightest object. Similarly with black. In this framework fit the full dynamic and color range of perception. Therefore, white wool for us in the morning and evening, can not be said about her in photos when lit or sunset. So what "true white" should be regarded as only conditionally neutral light because a true white does not exist in nature. A gift from God - the color adaptation. So don't go chasing ghosts, tembolee that forever we are not of the enlightened glass...

венн
Posts:16
Joined:Tue Jul 17, 2007 22:51

Post by венн » Wed Apr 30, 2008 18:36

So While Patrushev like that about it wrote - they say the white light is all that is necessary And people did not pay attention and still chasing expensive fancy colored colorstream nowhere to put the Money - spending on the prowl

User avatar
САДОвник
Posts:23
Joined:Tue Apr 01, 2008 18:17
Location:Киев

Post by САДОвник » Wed Apr 30, 2008 19:54

Venn in grey color, too, is all that is Nada, but only the eyes is not happy :wink: . In colortech nothing fancy, if not to take into account the very diode matrix there technology the day before yesterday. Just our overseas friends also want to eat. I, as the owner colortrac, the disadvantages can be attributed only to the cost(but motivated) but as a person eating solely from the yellow plates, is forced to disagree with you :? In matters not related to the blinding of the eye, colortrak very rescue. If not to delve into the therapeutic properties of color, that is, eventually you kind of just the mood and preference. My mom loves green, I'm depending on the objectives of the class also choose more in my estimation adequate, not necessarily the recipes potashnikov. I wouldn't have sold them for the same money that bought it... But the fact that they are not a deciding factor, I agree with that.

венн
Posts:16
Joined:Tue Jul 17, 2007 22:51

Post by венн » Fri May 02, 2008 22:32

Maybe so
But I can't imagine that people engaged in autostimulatory only by the like-don't like
Result!!!
Everything else is from the evil one
I eat when the color plates do not look

User avatar
САДОвник
Posts:23
Joined:Tue Apr 01, 2008 18:17
Location:Киев

Post by САДОвник » Sun May 04, 2008 11:57

Many people do not look at the world in which they live, because there is nothing interesting(in their opinion). But they have a purpose! Everyone has their own, but on her background universe pales. Venn, something tells me, we in the section "About the glasses," and you all about autostimulation. And as like do not like it, I have not heard that that yogi was meditating on construction sites and dumps for solid slogan - the main result. Let's turn on the point of objectivity, not purely personal preference. people do read it and make the choice after reading :?

User avatar
Камуи
Posts:58
Joined:Mon Jan 28, 2008 13:32
Location:Красноярск-Лиссабон-Брянск

Post by Камуи » Thu May 08, 2008 11:29

Good day good Sirs. Soldered points, BRIGHT Golubaya... 1200 mcd (microcender ???). It's about the plague :shock:
In the first place. They glow brighter with less current. A consequence you can not twist the volume on the player that would audiostrobe earned... Listening on your favorite 5-7% of the max volume. Louder just frustrating, annoying any sound.
Second. Price. 120 rubles. (3 RUB diode, 10 wire, 30 construction safety glasses, thin plastic instead of glass - pierced with a needle with a Bang).
Third. Appearance. Cyber punk 100%. Gibson in a nightmare never dreamed of such a literal voploshenie "technology of mind control, assembled on the knee" :D
Conclusion davolen like an elephant. first noticed the gaps between the thoughts. . . :)

User avatar
Бедный Котейко
Posts:16
Joined:Fri Jun 27, 2008 18:27

Post by Бедный Котейко » Fri Jun 27, 2008 18:35

Soldered points on white 1400 mcd LEDs. I noticed one peculiarity - the standard green glasses brightness during the session were about the same and then it became pretty widely to swim - from full attenuation to a brightness which is as much scary. Does such a function in the car or just a mismatch of electrical parameters ? Machine - innerpulse.

Guest

Post by Guest » Sat Jun 28, 2008 10:31

Бедный Котейко wrote:Soldered points on white 1400 mcd LEDs. I noticed one peculiarity - the standard green glasses brightness during the session were about the same and then it became pretty widely to swim - from full attenuation to a brightness which is as much scary. Does such a function in the car or just a mismatch of electrical parameters ? Machine - innerpulse.
The brightness in the sessions is constantly changing. It is particularly fond of A. Patrushev. On standard you could not notice the changes.

Post Reply